linux-stable.git/arch/powerpc/boot, branch v3.9

Merge remote-tracking branch 'agust/next' into next

2013-02-20T00:39:05+00:00

<<
Please pull mpc5xxx patches for v3.9. The bestcomm driver is
moved to drivers/dma (so it will be usable for ColdFire).
mpc5121 now provides common dtsi file and existing mpc5121 device
trees use it. There are some minor clock init and sparse fixes
and updates for various 5200 device tree files from Grant. Some
fixes for bugs in the mpc5121 DIU driver are also included here
(Andrew Morton suggested to push them via my mpc5xxx tree).
>>

powerpc/85xx: bsc9131 - Correct typo in SDHC device node

2013-02-19T17:01:14+00:00

BSC9131RDB doesn't have SDHC enabled. As a result of this typo,
the node was not getting disabled from the device tree which was
leading to linux hang during bootup

Signed-off-by: Harninder Rai 
Signed-off-by: Kumar Gala

powerpc/85xx: Board support for ppa8548

2013-02-15T19:54:10+00:00

Initial board support for the Prodrive PPA8548 AMC module. Board
is an MPC8548 AMC platform used in RapidIO systems. This module is
also used to test/work on mainline linux RapidIO software.

PPA8548 overview:
- 1.3 GHz Freescale PowerQUICC III MPC8548 processor
- 1 GB DDR2 @ 266 MHz
- 8 MB NOR flash
- Serial RapidIO 1.2
- 1 x 10/100/1000 BASE-T front ethernet
- 1 x 1000 BASE-BX ethernet on AMC connector

Signed-off-by: Stef van Os 
Acked-by: Timur Tabi 
Signed-off-by: Kumar Gala

powerpc/85xx: dts - add ranges property for SEC

2013-02-13T13:49:09+00:00

This facilitates getting the physical address of the SEC node.

Signed-off-by: Liu po 
Reviewed-by: Kim Phillips 
Signed-off-by: Kumar Gala

powerpc/85xx: fix various PCI node compatible strings

2013-02-13T13:49:03+00:00

Fix and/or improve the compatible strings of the PCI device tree nodes for
some Freescale SOCs.  This fixes some issues and improves consistency among
the SOCs.

Specifically:

1) The P1022 has a v1 PCIe controller, so the compatible property should just
say "fsl,mpc8548-pcie".  U-Boot does not look for "fsl,p1022-pcie", so it
wasn't fixing up the node.

2) The P4080 has a v2.1 PCIe controller, so add that version-specific string
to the device tree.  Update the kernel to also look for that string.
Currently, the kernel looks for "fsl,p4080-pcie" specifically, but
eventually that check should be deleted.

3) The P1010 device tree claims compatibility with v2.2 and v2.3, but that's
redundant.  No other device tree does this.  Remove the v2.2 string.

4) The kernel looks for both "fsl,p1023-pcie" and "fsl,qoriq-pcie-v2.2",
even though the P1023 device trees has always included both strings.  Remove
the search for "fsl,p1023-pcie".

Signed-off-by: Timur Tabi 
Signed-off-by: Kumar Gala

powerpc/85xx: describe the PAMU topology in the device tree

2013-02-13T13:49:02+00:00

The PAMU caches use the LIODNs to determine which cache lines hold the
entries for the corresponding LIODs.  The LIODNs must therefore be
carefully assigned to avoid cache thrashing -- two active LIODs with
LIODNs that put them in the same cache line.

Currently, LIODNs are statically assigned by U-Boot, but this has
limitations.  LIODNs are assigned even for devices that may be disabled
or unused by the kernel.  Static assignments also do not allow for device
drivers which may know which LIODs can be used simultaneously.  In
other words, we really should assign LIODNs dynamically in Linux.

To do that, we need to describe the PAMU device and cache topologies in
the device trees.

Signed-off-by: Timur Tabi 
Acked-by: Stuart Yoder 
Acked-by: Scott Wood 
Signed-off-by: Kumar Gala

powerpc/85xx: add alternate dts file for sbc8548 boot via SODIMM

2013-02-13T13:49:00+00:00

By moving the two JP12 jumpers 90 degrees, and switching the
setting of SW2.8, the sbc8548 can be configured to boot off
the alternate 64MB SODIMM, which when populated with u-boot
can be a handy recovery option, in case the u-boot in the
8MB soldered on flash gets corrupted.  Here we add an alternate
dts file to match that configuration.

To better highlight the differences, the output from the u-boot
"fli" command is shown for the normal configuration and then
the alternate configuration.

Normal:
 -----------------------
Bank # 1: CFI conformant flash (8 x 8)  Size: 8 MB in 64 Sectors
  Intel Extended command set, Manufacturer ID: 0x89, Device ID: 0x17
  Erase timeout: 4096 ms, write timeout: 1 ms
  Buffer write timeout: 2 ms, buffer size: 32 bytes

  Sector Start Addresses:
  FF800000 E      FF820000 E      FF840000 E      FF860000 E      FF880000 E
 [...]
  FFEE0000 E      FFF00000 E      FFF20000 E      FFF40000 E      FFF60000 E
  FFF80000        FFFA0000   RO   FFFC0000   RO   FFFE0000   RO

Bank # 2: CFI conformant flash (32 x 8)  Size: 64 MB in 128 Sectors
  Intel Extended command set, Manufacturer ID: 0x89, Device ID: 0x18
  Erase timeout: 4096 ms, write timeout: 1 ms
  Buffer write timeout: 2 ms, buffer size: 32 bytes

  Sector Start Addresses:
  EC000000 E      EC080000 E      EC100000 E      EC180000 E      EC200000 E
 [...]
  EFC00000 E      EFC80000 E      EFD00000 E      EFD80000 E      EFE00000 E
  EFE80000 E      EFF00000        EFF80000
 -----------------------

Alternate:
 -----------------------
Bank # 1: CFI conformant flash (32 x 8)  Size: 64 MB in 128 Sectors
  Intel Extended command set, Manufacturer ID: 0x89, Device ID: 0x18
  Erase timeout: 4096 ms, write timeout: 1 ms
  Buffer write timeout: 2 ms, buffer size: 32 bytes

  Sector Start Addresses:
  FC000000 E      FC080000 E      FC100000 E      FC180000 E      FC200000 E
 [...]
  FFC00000 E      FFC80000 E      FFD00000 E      FFD80000 E      FFE00000 E
  FFE80000 E      FFF00000   RO   FFF80000   RO

Bank # 2: CFI conformant flash (8 x 8)  Size: 8 MB in 64 Sectors
  Intel Extended command set, Manufacturer ID: 0x89, Device ID: 0x17
  Erase timeout: 4096 ms, write timeout: 1 ms
  Buffer write timeout: 2 ms, buffer size: 32 bytes

  Sector Start Addresses:
  EF800000 E      EF820000 E      EF840000 E      EF860000 E      EF880000 E
 [...]
  EFEE0000 E      EFF00000 E      EFF20000 E      EFF40000 E      EFF60000 E
  EFF80000 E      EFFA0000        EFFC0000        EFFE0000
 -----------------------

Signed-off-by: Paul Gortmaker 
Signed-off-by: Kumar Gala

powerpc/85xx: update sbc8548 flash information to match recent u-boot

2013-02-13T13:48:59+00:00

The original memory map for the sbc8548 had the 64MB SODIMM flash
device misaligned by 8MB to allow a window of address space for
the soldered on 8MB device -- i.e.

 start           end             CS   width   Desc.
 ----------------------------------------------------------
 fb80_0000       ff7f_ffff       CS6     32      SODIMM flash (64MB)
 ff80_0000       ffff_ffff       CS0     8       Boot flash (8MB)

However, if we want to change the configuration so that it boots
off the 64MB flash, it is in turn then aligned with a 64MB boundary,
starting at fc00_0000 (and the 8MB @ fb80_0000 -> fbff_ffff).

This makes for complicated updates, since what is the beginning
of the physical device is 8MB into its address space in the default
configuration shown above.

This issue was fixed as of u-boot commit 3fd673cf363bc86ed42eff713d4
("sbc8548: relocate 64MB user flash to sane boundary") -- in which
the SODIMM was mapped to ec00_0000 (natively aligned under efff_ffff)
and so when JP12/SW2.8 are switched, it will be a a simple 0xec --> 0xfc
mapping between the two instances.

Here we make the associated changes in the localbus flash memory
map in the dts file:  indicating the 64MB device starts at ec00_0000
and that the tail end of the 64MB device (last 2 sectors) can contain
a bootloader image.

The partitions for both flash devices get a clean-up; there were
non-meaningful assignments in there that probably originated from
the MPC8548CDS on which the file was based on.  Now there is just
the categorization of free space and bootloader images.

Signed-off-by: Paul Gortmaker 
Signed-off-by: Kumar Gala

powerpc/85xx: split sbc8548 dts file into pre and post chunks

2013-02-13T13:48:58+00:00

Updates to u-boot allow this board to boot off of either
the 8MB soldered on flash, or the 64MB SODIMM flash.

This is achieved by changing JP12 and SW2.8 which in turn
swaps which flash device appears on /CS0 and /CS6 respectively.

Since the flash devices are not the same size, this also
changes the MTD memory map layout on the local bus.

Here we split the common chunks out into a pre and post
include, so they can be reused by an upcoming "alternative
boot" dts file; leaving only the local bus chunk behind.

No content changes are made at this point - it is just purely
the move to using include files.

Signed-off-by: Paul Gortmaker 
Signed-off-by: Kumar Gala

powerpc/5200: Use the gpt* labels to simplify mpc5200 dts files

2013-02-11T21:48:09+00:00

The DTC labels feature allows a dts file to reference a node without
having to reproduce the entire node hierarchy above it. We can use this
to simplify the MPC5200 board dts files by referencing the gpt nodes by
label.

Cc: Anatolij Gustschin 
Signed-off-by: Grant Likely 
[agust: fixed gpt7 phandle in the csi node of o2d.dtsi]
Signed-off-by: Anatolij Gustschin