linux-stable.git/arch/parisc/kernel/traps.c, branch v4.2

parisc: Fix some PTE/TLB race conditions and optimize __flush_tlb_range based on timing results

2015-07-10T19:47:47+00:00

The increased use of pdtlb/pitlb instructions seemed to increase the
frequency of random segmentation faults building packages. Further, we
had a number of cases where TLB inserts would repeatedly fail and all
forward progress would stop. The Haskell ghc package caused a lot of
trouble in this area. The final indication of a race in pte handling was
this syslog entry on sibaris (C8000):

 swap_free: Unused swap offset entry 00000004
 BUG: Bad page map in process mysqld  pte:00000100 pmd:019bbec5
 addr:00000000ec464000 vm_flags:00100073 anon_vma:0000000221023828 mapping: (null) index:ec464
 CPU: 1 PID: 9176 Comm: mysqld Not tainted 4.0.0-2-parisc64-smp #1 Debian 4.0.5-1
 Backtrace:
  [<0000000040173eb0>] show_stack+0x20/0x38
  [<0000000040444424>] dump_stack+0x9c/0x110
  [<00000000402a0d38>] print_bad_pte+0x1a8/0x278
  [<00000000402a28b8>] unmap_single_vma+0x3d8/0x770
  [<00000000402a4090>] zap_page_range+0xf0/0x198
  [<00000000402ba2a4>] SyS_madvise+0x404/0x8c0

Note that the pte value is 0 except for the accessed bit 0x100. This bit
shouldn't be set without the present bit.

It should be noted that the madvise system call is probably a trigger for many
of the random segmentation faults.

In looking at the kernel code, I found the following problems:

1) The pte_clear define didn't take TLB lock when clearing a pte.
2) We didn't test pte present bit inside lock in exception support.
3) The pte and tlb locks needed to merged in order to ensure consistency
between page table and TLB. This also has the effect of serializing TLB
broadcasts on SMP systems.

The attached change implements the above and a few other tweaks to try
to improve performance. Based on the timing code, TLB purges are very
slow (e.g., ~ 209 cycles per page on rp3440). Thus, I think it
beneficial to test the split_tlb variable to avoid duplicate purges.
Probably, all PA 2.0 machines have combined TLBs.

I dropped using __flush_tlb_range in flush_tlb_mm as I realized all
applications and most threads have a stack size that is too large to
make this useful. I added some comments to this effect.

Since implementing 1 through 3, I haven't had any random segmentation
faults on mx3210 (rp3440) in about one week of building code and running
as a Debian buildd.

Signed-off-by: John David Anglin 
Cc: stable@vger.kernel.org # v3.18+
Signed-off-by: Helge Deller

mm/fault, arch: Use pagefault_disable() to check for disabled pagefaults in the handler

2015-05-19T06:39:15+00:00

Introduce faulthandler_disabled() and use it to check for irq context and
disabled pagefaults (via pagefault_disable()) in the pagefault handlers.

Please note that we keep the in_atomic() checks in place - to detect
whether in irq context (in which case preemption is always properly
disabled).

In contrast, preempt_disable() should never be used to disable pagefaults.
With !CONFIG_PREEMPT_COUNT, preempt_disable() doesn't modify the preempt
counter, and therefore the result of in_atomic() differs.
We validate that condition by using might_fault() checks when calling
might_sleep().

Therefore, add a comment to faulthandler_disabled(), describing why this
is needed.

faulthandler_disabled() and pagefault_disable() are defined in
linux/uaccess.h, so let's properly add that include to all relevant files.

This patch is based on a patch from Thomas Gleixner.

Reviewed-and-tested-by: Thomas Gleixner 
Signed-off-by: David Hildenbrand 
Signed-off-by: Peter Zijlstra (Intel) 
Cc: David.Laight@ACULAB.COM
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: airlied@linux.ie
Cc: akpm@linux-foundation.org
Cc: benh@kernel.crashing.org
Cc: bigeasy@linutronix.de
Cc: borntraeger@de.ibm.com
Cc: daniel.vetter@intel.com
Cc: heiko.carstens@de.ibm.com
Cc: herbert@gondor.apana.org.au
Cc: hocko@suse.cz
Cc: hughd@google.com
Cc: mst@redhat.com
Cc: paulus@samba.org
Cc: ralf@linux-mips.org
Cc: schwidefsky@de.ibm.com
Cc: yang.shi@windriver.com
Link: http://lkml.kernel.org/r/1431359540-32227-7-git-send-email-dahi@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar

parisc: ratelimit userspace segfault printing

2014-05-15T19:12:15+00:00

Ratelimit printing of userspace segfaults and make it runtime
configurable via the /proc/sys/debug/exception-trace variable. This
should resolve syslog from growing way too fast and thus prevents
possible system service attacks.

Signed-off-by: Helge Deller 
Cc: stable@vger.kernel.org # 3.13+

parisc: fix interruption handler to respect pagefault_disable()

2013-10-13T15:45:20+00:00

Running an "echo t > /proc/sysrq-trigger" crashes the parisc kernel.  The
problem is, that in print_worker_info() we try to read the workqueue info via
the probe_kernel_read() functions which use pagefault_disable() to avoid
crashes like this:
    probe_kernel_read(&pwq, &worker->current_pwq, sizeof(pwq));
    probe_kernel_read(&wq, &pwq->wq, sizeof(wq));
    probe_kernel_read(name, wq->name, sizeof(name) - 1);

The problem here is, that the first probe_kernel_read(&pwq) might return zero
in pwq and as such the following probe_kernel_reads() try to access contents of
the page zero which is read protected and generate a kernel segfault.

With this patch we fix the interruption handler to call parisc_terminate()
directly only if pagefault_disable() was not called (in which case
preempt_count()==0).  Otherwise we hand over to the pagefault handler which
will try to look up the faulting address in the fixup tables.

Signed-off-by: Helge Deller 
Cc:  # v3.0+
Signed-off-by: John David Anglin  
Signed-off-by: Helge Deller

parisc: remove unused syscall_ipi() function.

2013-10-13T15:44:39+00:00

Signed-off-by: Helge Deller

parisc: show number of FPE and unaligned access handler calls in /proc/interrupts

2013-05-24T20:35:26+00:00

Show number of floating point assistant and unaligned access fixup
handler in /proc/interrupts file.

Signed-off-by: Helge Deller

parisc: fix whitespace errors in arch/parisc/kernel/traps.c

2013-05-06T20:24:57+00:00

Things like " \t" and whitespace at end of line. I'm leaving all the other
coding style errors here alone.

Signed-off-by: Rolf Eike Beer 
Signed-off-by: Helge Deller

dump_stack: unify debug information printed by show_regs()

2013-05-01T00:04:02+00:00

show_regs() is inherently arch-dependent but it does make sense to print
generic debug information and some archs already do albeit in slightly
different forms.  This patch introduces a generic function to print debug
information from show_regs() so that different archs print out the same
information and it's much easier to modify what's printed.

show_regs_print_info() prints out the same debug info as dump_stack()
does plus task and thread_info pointers.

* Archs which didn't print debug info now do.

  alpha, arc, blackfin, c6x, cris, frv, h8300, hexagon, ia64, m32r,
  metag, microblaze, mn10300, openrisc, parisc, score, sh64, sparc,
  um, xtensa

* Already prints debug info.  Replaced with show_regs_print_info().
  The printed information is superset of what used to be there.

  arm, arm64, avr32, mips, powerpc, sh32, tile, unicore32, x86

* s390 is special in that it used to print arch-specific information
  along with generic debug info.  Heiko and Martin think that the
  arch-specific extra isn't worth keeping s390 specfic implementation.
  Converted to use the generic version.

Note that now all archs print the debug info before actual register
dumps.

An example BUG() dump follows.

 kernel BUG at /work/os/work/kernel/workqueue.c:4841!
 invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
 Modules linked in:
 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0-rc1-work+ #7
 Hardware name: empty empty/S3992, BIOS 080011  10/26/2007
 task: ffff88007c85e040 ti: ffff88007c860000 task.ti: ffff88007c860000
 RIP: 0010:[]  [] init_workqueues+0x4/0x6
 RSP: 0000:ffff88007c861ec8  EFLAGS: 00010246
 RAX: ffff88007c861fd8 RBX: ffffffff824466a8 RCX: 0000000000000001
 RDX: 0000000000000046 RSI: 0000000000000001 RDI: ffffffff8234a07a
 RBP: ffff88007c861ec8 R08: 0000000000000000 R09: 0000000000000000
 R10: 0000000000000001 R11: 0000000000000000 R12: ffffffff8234a07a
 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
 FS:  0000000000000000(0000) GS:ffff88007dc00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
 CR2: ffff88015f7ff000 CR3: 00000000021f1000 CR4: 00000000000007f0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
 Stack:
  ffff88007c861ef8 ffffffff81000312 ffffffff824466a8 ffff88007c85e650
  0000000000000003 0000000000000000 ffff88007c861f38 ffffffff82335e5d
  ffff88007c862080 ffffffff8223d8c0 ffff88007c862080 ffffffff81c47760
 Call Trace:
  [] do_one_initcall+0x122/0x170
  [] kernel_init_freeable+0x9b/0x1c8
  [] ? rest_init+0x140/0x140
  [] kernel_init+0xe/0xf0
  [] ret_from_fork+0x7c/0xb0
  [] ? rest_init+0x140/0x140
  ...

v2: Typo fix in x86-32.

v3: CPU number dropped from show_regs_print_info() as
    dump_stack_print_info() has been updated to print it.  s390
    specific implementation dropped as requested by s390 maintainers.

Signed-off-by: Tejun Heo 
Acked-by: David S. Miller 
Acked-by: Jesper Nilsson 
Cc: Heiko Carstens 
Cc: Martin Schwidefsky 
Cc: Bjorn Helgaas 
Cc: Fengguang Wu 
Cc: Mike Frysinger 
Cc: Vineet Gupta 
Cc: Sam Ravnborg 
Acked-by: Chris Metcalf 		[tile bits]
Acked-by: Richard Kuo 		[hexagon bits]
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

dump_stack: consolidate dump_stack() implementations and unify their behaviors

2013-05-01T00:04:02+00:00

Both dump_stack() and show_stack() are currently implemented by each
architecture.  show_stack(NULL, NULL) dumps the backtrace for the
current task as does dump_stack().  On some archs, dump_stack() prints
extra information - pid, utsname and so on - in addition to the
backtrace while the two are identical on other archs.

The usages in arch-independent code of the two functions indicate
show_stack(NULL, NULL) should print out bare backtrace while
dump_stack() is used for debugging purposes when something went wrong,
so it does make sense to print additional information on the task which
triggered dump_stack().

There's no reason to require archs to implement two separate but mostly
identical functions.  It leads to unnecessary subtle information.

This patch expands the dummy fallback dump_stack() implementation in
lib/dump_stack.c such that it prints out debug information (taken from
x86) and invokes show_stack(NULL, NULL) and drops arch-specific
dump_stack() implementations in all archs except blackfin.  Blackfin's
dump_stack() does something wonky that I don't understand.

Debug information can be printed separately by calling
dump_stack_print_info() so that arch-specific dump_stack()
implementation can still emit the same debug information.  This is used
in blackfin.

This patch brings the following behavior changes.

* On some archs, an extra level in backtrace for show_stack() could be
  printed.  This is because the top frame was determined in
  dump_stack() on those archs while generic dump_stack() can't do that
  reliably.  It can be compensated by inlining dump_stack() but not
  sure whether that'd be necessary.

* Most archs didn't use to print debug info on dump_stack().  They do
  now.

An example WARN dump follows.

 WARNING: at kernel/workqueue.c:4841 init_workqueues+0x35/0x505()
 Hardware name: empty
 Modules linked in:
 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0-rc1-work+ #9
  0000000000000009 ffff88007c861e08 ffffffff81c614dc ffff88007c861e48
  ffffffff8108f50f ffffffff82228240 0000000000000040 ffffffff8234a03c
  0000000000000000 0000000000000000 0000000000000000 ffff88007c861e58
 Call Trace:
  [] dump_stack+0x19/0x1b
  [] warn_slowpath_common+0x7f/0xc0
  [] warn_slowpath_null+0x1a/0x20
  [] init_workqueues+0x35/0x505
  ...

v2: CPU number added to the generic debug info as requested by s390
    folks and dropped the s390 specific dump_stack().  This loses %ksp
    from the debug message which the maintainers think isn't important
    enough to keep the s390-specific dump_stack() implementation.

    dump_stack_print_info() is moved to kernel/printk.c from
    lib/dump_stack.c.  Because linkage is per objecct file,
    dump_stack_print_info() living in the same lib file as generic
    dump_stack() means that archs which implement custom dump_stack()
    - at this point, only blackfin - can't use dump_stack_print_info()
    as that will bring in the generic version of dump_stack() too.  v1
    The v1 patch broke build on blackfin due to this issue.  The build
    breakage was reported by Fengguang Wu.

Signed-off-by: Tejun Heo 
Acked-by: David S. Miller 
Acked-by: Vineet Gupta 
Acked-by: Jesper Nilsson 
Acked-by: Vineet Gupta 
Acked-by: Martin Schwidefsky 	[s390 bits]
Cc: Heiko Carstens 
Cc: Mike Frysinger 
Cc: Fengguang Wu 
Cc: Bjorn Helgaas 
Cc: Sam Ravnborg 
Acked-by: Richard Kuo 		[hexagon bits]
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

taint: add explicit flag to show whether lock dep is still OK.

2013-01-21T06:47:57+00:00

Fix up all callers as they were before, with make one change: an
unsigned module taints the kernel, but doesn't turn off lockdep.

Signed-off-by: Rusty Russell