linux-stable.git/arch/openrisc, branch v3.3

openrisc: Fix up audit_syscall_[entry|exit]() usage

2012-02-17T08:53:12+00:00

Commits d7e7528bcd456f5c36ad4a202ccfb43c5aa98bc4 and
b05d8447e7821695bc2fa3359431f7a664232743 simplified the usage of the
audit_syscall_[entry|exit] functions.  Unfortunately, the OpenRISC
architecture didn't get fixed up along with the other architectures when
those patches were pushed.  This makes the relevant changes to this
architecture.

Signed-off-by: Jonas Bonn

openrisc: include export.h for EXPORT_SYMBOL

2012-02-17T08:52:32+00:00

Use of EXPORT_SYMBOL requires inclusion of export.h

Signed-off-by: Jonas Bonn

Merge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild

2012-01-16T22:34:54+00:00

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  Kbuild: Use dtc's -d (dependency) option
  dtc: Implement -d option to write out a dependency file
  kbuild: Fix comment in Makefile.lib
  scripts/genksyms: clean lex/yacc generated files
  kbuild: Correctly deal with make options which contain an "s"

Kbuild: Use dtc's -d (dependency) option

2012-01-14T23:04:35+00:00

This hooks dtc into Kbuild's dependency system.

Thus, for example, "make dtbs" will rebuild tegra-harmony.dtb if only
tegra20.dtsi has changed yet tegra-harmony.dts has not. The previous
lack of this feature recently caused me to have very confusing "git
bisect" results.

For ARM, it's obvious what to add to $(targets). I'm not familiar enough
with other architectures to know what to add there. Powerpc appears to
already add various .dtb files into $(targets), but the other archs may
need something added to $(targets) to work.

Signed-off-by: Stephen Warren 
Acked-by: Shawn Guo 
[mmarek: Dropped arch/c6x part to avoid merging commits from the middle
of the merge window]
Signed-off-by: Michal Marek

cpu: Register a generic CPU device on architectures that currently do not

2012-01-11T23:50:11+00:00

frv, h8300, m68k, microblaze, openrisc, score, um and xtensa currently
do not register a CPU device.  Add the config option GENERIC_CPU_DEVICES
which causes a generic CPU device to be registered for each present CPU,
and make all these architectures select it.

Richard Weinberger  covered UML and suggested using
per_cpu.

Signed-off-by: Ben Hutchings 
Signed-off-by: Linus Torvalds

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

2012-01-11T02:04:27+00:00

lib: use generic pci_iomap on all architectures

Many architectures don't want to pull in iomap.c,
so they ended up duplicating pci_iomap from that file.
That function isn't trivial, and we are going to modify it
https://lkml.org/lkml/2011/11/14/183
so the duplication hurts.

This reduces the scope of the problem significantly,
by moving pci_iomap to a separate file and
referencing that from all architectures.

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  alpha: drop pci_iomap/pci_iounmap from pci-noop.c
  mn10300: switch to GENERIC_PCI_IOMAP
  mn10300: add missing __iomap markers
  frv: switch to GENERIC_PCI_IOMAP
  tile: switch to GENERIC_PCI_IOMAP
  tile: don't panic on iomap
  sparc: switch to GENERIC_PCI_IOMAP
  sh: switch to GENERIC_PCI_IOMAP
  powerpc: switch to GENERIC_PCI_IOMAP
  parisc: switch to GENERIC_PCI_IOMAP
  mips: switch to GENERIC_PCI_IOMAP
  microblaze: switch to GENERIC_PCI_IOMAP
  arm: switch to GENERIC_PCI_IOMAP
  alpha: switch to GENERIC_PCI_IOMAP
  lib: add GENERIC_PCI_IOMAP
  lib: move GENERIC_IOMAP to lib/Kconfig

Fix up trivial conflicts due to changes nearby in arch/{m68k,score}/Kconfig

Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2012-01-06T16:02:40+00:00

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (64 commits)
  cpu: Export cpu_up()
  rcu: Apply ACCESS_ONCE() to rcu_boost() return value
  Revert "rcu: Permit rt_mutex_unlock() with irqs disabled"
  docs: Additional LWN links to RCU API
  rcu: Augment rcu_batch_end tracing for idle and callback state
  rcu: Add rcutorture tests for srcu_read_lock_raw()
  rcu: Make rcutorture test for hotpluggability before offlining CPUs
  driver-core/cpu: Expose hotpluggability to the rest of the kernel
  rcu: Remove redundant rcu_cpu_stall_suppress declaration
  rcu: Adaptive dyntick-idle preparation
  rcu: Keep invoking callbacks if CPU otherwise idle
  rcu: Irq nesting is always 0 on rcu_enter_idle_common
  rcu: Don't check irq nesting from rcu idle entry/exit
  rcu: Permit dyntick-idle with callbacks pending
  rcu: Document same-context read-side constraints
  rcu: Identify dyntick-idle CPUs on first force_quiescent_state() pass
  rcu: Remove dynticks false positives and RCU failures
  rcu: Reduce latency of rcu_prepare_for_idle()
  rcu: Eliminate RCU_FAST_NO_HZ grace-period hang
  rcu: Avoid needlessly IPIing CPUs at GP end
  ...

nohz: Remove tick_nohz_idle_enter_norcu() / tick_nohz_idle_exit_norcu()

2011-12-11T18:31:57+00:00

Those two APIs were provided to optimize the calls of
tick_nohz_idle_enter() and rcu_idle_enter() into a single
irq disabled section. This way no interrupt happening in-between would
needlessly process any RCU job.

Now we are talking about an optimization for which benefits
have yet to be measured. Let's start simple and completely decouple
idle rcu and dyntick idle logics to simplify.

Signed-off-by: Frederic Weisbecker 
Cc: Ingo Molnar 
Cc: Thomas Gleixner 
Cc: Peter Zijlstra 
Reviewed-by: Josh Triplett 
Signed-off-by: Paul E. McKenney

nohz: Allow rcu extended quiescent state handling seperately from tick stop

2011-12-11T18:31:36+00:00

It is assumed that rcu won't be used once we switch to tickless
mode and until we restart the tick. However this is not always
true, as in x86-64 where we dereference the idle notifiers after
the tick is stopped.

To prepare for fixing this, add two new APIs:
tick_nohz_idle_enter_norcu() and tick_nohz_idle_exit_norcu().

If no use of RCU is made in the idle loop between
tick_nohz_enter_idle() and tick_nohz_exit_idle() calls, the arch
must instead call the new *_norcu() version such that the arch doesn't
need to call rcu_idle_enter() and rcu_idle_exit().

Otherwise the arch must call tick_nohz_enter_idle() and
tick_nohz_exit_idle() and also call explicitly:

- rcu_idle_enter() after its last use of RCU before the CPU is put
to sleep.
- rcu_idle_exit() before the first use of RCU after the CPU is woken
up.

Signed-off-by: Frederic Weisbecker 
Cc: Mike Frysinger 
Cc: Guan Xuetao 
Cc: David Miller 
Cc: Chris Metcalf 
Cc: Hans-Christian Egtvedt 
Cc: Ralf Baechle 
Cc: Paul E. McKenney 
Cc: Ingo Molnar 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: H. Peter Anvin 
Cc: Russell King 
Cc: Paul Mackerras 
Cc: Heiko Carstens 
Cc: Paul Mundt 
Signed-off-by: Paul E. McKenney

nohz: Separate out irq exit and idle loop dyntick logic

2011-12-11T18:31:35+00:00

The tick_nohz_stop_sched_tick() function, which tries to delay
the next timer tick as long as possible, can be called from two
places:

- From the idle loop to start the dytick idle mode
- From interrupt exit if we have interrupted the dyntick
idle mode, so that we reprogram the next tick event in
case the irq changed some internal state that requires this
action.

There are only few minor differences between both that
are handled by that function, driven by the ts->inidle
cpu variable and the inidle parameter. The whole guarantees
that we only update the dyntick mode on irq exit if we actually
interrupted the dyntick idle mode, and that we enter in RCU extended
quiescent state from idle loop entry only.

Split this function into:

- tick_nohz_idle_enter(), which sets ts->inidle to 1, enters
dynticks idle mode unconditionally if it can, and enters into RCU
extended quiescent state.

- tick_nohz_irq_exit() which only updates the dynticks idle mode
when ts->inidle is set (ie: if tick_nohz_idle_enter() has been called).

To maintain symmetry, tick_nohz_restart_sched_tick() has been renamed
into tick_nohz_idle_exit().

This simplifies the code and micro-optimize the irq exit path (no need
for local_irq_save there). This also prepares for the split between
dynticks and rcu extended quiescent state logics. We'll need this split to
further fix illegal uses of RCU in extended quiescent states in the idle
loop.

Signed-off-by: Frederic Weisbecker 
Cc: Mike Frysinger 
Cc: Guan Xuetao 
Cc: David Miller 
Cc: Chris Metcalf 
Cc: Hans-Christian Egtvedt 
Cc: Ralf Baechle 
Cc: Paul E. McKenney 
Cc: Ingo Molnar 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: H. Peter Anvin 
Cc: Russell King 
Cc: Paul Mackerras 
Cc: Heiko Carstens 
Cc: Paul Mundt 
Signed-off-by: Paul E. McKenney 
Reviewed-by: Josh Triplett