linux-stable.git/arch/openrisc, branch linux-5.4.y

openrisc: Call setup_memory() earlier in the init sequence

2024-09-04T11:14:57+00:00

[ Upstream commit 7b432bf376c9c198a7ff48f1ed14a14c0ffbe1fe ]

The unflatten_and_copy_device_tree() function contains a call to
memblock_alloc(). This means that memblock is allocating memory before
any of the reserved memory regions are set aside in the setup_memory()
function which calls early_init_fdt_scan_reserved_mem(). Therefore,
there is a possibility for memblock to allocate from any of the
reserved memory regions.

Hence, move the call to setup_memory() to be earlier in the init
sequence so that the reserved memory regions are set aside before any
allocations are done using memblock.

Signed-off-by: Oreoluwa Babatunde 
Signed-off-by: Stafford Horne 
Signed-off-by: Sasha Levin

openrisc: Properly store r31 to pt_regs on unhandled exceptions

2023-05-17T09:35:53+00:00

[ Upstream commit 812489ac4dd91144a74ce65ecf232252a2e406fb ]

In commit 91993c8c2ed5 ("openrisc: use shadow registers to save regs on
exception") the unhandled exception path was changed to do an early
store of r30 instead of r31.  The entry code was not updated and r31 is
not getting stored to pt_regs.

This patch updates the entry handler to store r31 instead of r30.  We
also remove some misleading commented out store r30 and r31
instructrions.

I noticed this while working on adding floating point exception
handling,  This issue probably would never impact anything since we kill
the process or Oops right away on unhandled exceptions.

Fixes: 91993c8c2ed5 ("openrisc: use shadow registers to save regs on exception")
Signed-off-by: Stafford Horne 
Signed-off-by: Sasha Levin

dma-mapping: drop the dev argument to arch_sync_dma_for_*

2023-04-05T09:16:43+00:00

[ Upstream commit 56e35f9c5b87ec1ae93e483284e189c84388de16 ]

These are pure cache maintainance routines, so drop the unused
struct device argument.

Signed-off-by: Christoph Hellwig 
Suggested-by: Daniel Vetter 
Stable-dep-of: ab327f8acdf8 ("mips: bmips: BCM6358: disable RAC flush for TP1")
Signed-off-by: Sasha Levin

exit: Add and use make_task_dead.

2023-02-06T06:52:49+00:00

commit 0e25498f8cd43c1b5aa327f373dd094e9a006da7 upstream.

There are two big uses of do_exit.  The first is it's design use to be
the guts of the exit(2) system call.  The second use is to terminate
a task after something catastrophic has happened like a NULL pointer
in kernel code.

Add a function make_task_dead that is initialy exactly the same as
do_exit to cover the cases where do_exit is called to handle
catastrophic failure.  In time this can probably be reduced to just a
light wrapper around do_task_dead. For now keep it exactly the same so
that there will be no behavioral differences introducing this new
concept.

Replace all of the uses of do_exit that use it for catastraphic
task cleanup with make_task_dead to make it clear what the code
is doing.

As part of this rename rewind_stack_do_exit
rewind_stack_and_make_dead.

Signed-off-by: "Eric W. Biederman" 
Signed-off-by: Eric Biggers 
Signed-off-by: Sasha Levin

openrisc: start CPU timer early in boot

2022-06-14T16:11:28+00:00

[ Upstream commit 516dd4aacd67a0f27da94f3fe63fe0f4dbab6e2b ]

In order to measure the boot process, the timer should be switched on as
early in boot as possible. As well, the commit defines the get_cycles
macro, like the previous patches in this series, so that generic code is
aware that it's implemented by the platform, as is done on other archs.

Cc: Thomas Gleixner 
Cc: Arnd Bergmann 
Cc: Jonas Bonn 
Cc: Stefan Kristiansson 
Acked-by: Stafford Horne 
Reported-by: Guenter Roeck 
Signed-off-by: Jason A. Donenfeld 
Signed-off-by: Sasha Levin

openrisc: don't printk() unconditionally

2021-09-22T10:26:24+00:00

[ Upstream commit 946e1052cdcc7e585ee5d1e72528ca49fb295243 ]

Don't call printk() when CONFIG_PRINTK is not set.
Fixes the following build errors:

or1k-linux-ld: arch/openrisc/kernel/entry.o: in function `_external_irq_handler':
(.text+0x804): undefined reference to `printk'
(.text+0x804): relocation truncated to fit: R_OR1K_INSN_REL_26 against undefined symbol `printk'

Fixes: 9d02a4283e9c ("OpenRISC: Boot code")
Signed-off-by: Randy Dunlap 
Reported-by: kernel test robot 
Cc: Jonas Bonn 
Cc: Stefan Kristiansson 
Cc: Stafford Horne 
Cc: openrisc@lists.librecores.org
Signed-off-by: Stafford Horne 
Signed-off-by: Sasha Levin

openrisc: Define memory barrier mb

2021-06-03T06:59:11+00:00

[ Upstream commit 8b549c18ae81dbc36fb11e4aa08b8378c599ca95 ]

This came up in the discussion of the requirements of qspinlock on an
architecture.  OpenRISC uses qspinlock, but it was noticed that the
memmory barrier was not defined.

Peter defined it in the mail thread writing:

    As near as I can tell this should do. The arch spec only lists
    this one instruction and the text makes it sound like a completion
    barrier.

This is correct so applying this patch.

Signed-off-by: Peter Zijlstra 
[shorne@gmail.com:Turned the mail into a patch]
Signed-off-by: Stafford Horne 
Signed-off-by: Sasha Levin

openrisc: Fix a memory leak

2021-05-26T10:05:14+00:00

[ Upstream commit c019d92457826bb7b2091c86f36adb5de08405f9 ]

'setup_find_cpu_node()' take a reference on the node it returns.
This reference must be decremented when not needed anymore, or there will
be a leak.

Add the missing 'of_node_put(cpu)'.

Note that 'setup_cpuinfo()' that also calls this function already has a
correct 'of_node_put(cpu)' at its end.

Fixes: 9d02a4283e9c ("OpenRISC: Boot code")
Signed-off-by: Christophe JAILLET 
Signed-off-by: Stafford Horne 
Signed-off-by: Sasha Levin

openrisc: Fix issue with get_user for 64-bit values

2020-11-01T11:01:06+00:00

commit d877322bc1adcab9850732275670409e8bcca4c4 upstream.

A build failure was raised by kbuild with the following error.

drivers/android/binder.c: Assembler messages:
drivers/android/binder.c:3861: Error: unrecognized keyword/register name `l.lwz ?ap,4(r24)'
drivers/android/binder.c:3866: Error: unrecognized keyword/register name `l.addi ?ap,r0,0'

The issue is with 64-bit get_user() calls on openrisc. I traced this to
a problem where in the internally in the get_user macros there is a cast
to long __gu_val this causes GCC to think the get_user call is 32-bit.
This binder code is really long and GCC allocates register r30, which
triggers the issue. The 64-bit get_user asm tries to get the 64-bit pair
register, which for r30 overflows the general register names and returns
the dummy register ?ap.

The fix here is to move the temporary variables into the asm macros. We
use a 32-bit __gu_tmp for 32-bit and smaller macro and a 64-bit tmp in
the 64-bit macro. The cast in the 64-bit macro has a trick of casting
through __typeof__((x)-(x)) which avoids the below warning. This was
barrowed from riscv.

arch/openrisc/include/asm/uaccess.h:240:8: warning: cast to pointer from integer of different size

I tested this in a small unit test to check reading between 64-bit and
32-bit pointers to 64-bit and 32-bit values in all combinations. Also I
ran make C=1 to confirm no new sparse warnings came up. It all looks
clean to me.

Link: https://lore.kernel.org/lkml/202008200453.ohnhqkjQ%25lkp@intel.com/
Signed-off-by: Stafford Horne
Reviewed-by: Luc Van Oostenryck
Signed-off-by: Greg Kroah-Hartman

openrisc: Fix cache API compile issue when not inlining

2020-09-23T10:40:36+00:00

[ Upstream commit 3ae90d764093dfcd6ab8ab6875377302892c87d4 ]

I found this when compiling a kbuild random config with GCC 11.  The
config enables CONFIG_DEBUG_SECTION_MISMATCH, which sets CFLAGS
-fno-inline-functions-called-once. This causes the call to cache_loop in
cache.c to not be inlined causing the below compile error.

    In file included from arch/openrisc/mm/cache.c:13:
    arch/openrisc/mm/cache.c: In function 'cache_loop':
    ./arch/openrisc/include/asm/spr.h:16:27: warning: 'asm' operand 0 probably does not match constraints
       16 | #define mtspr(_spr, _val) __asm__ __volatile__ (  \
	  |                           ^~~~~~~
    arch/openrisc/mm/cache.c:25:3: note: in expansion of macro 'mtspr'
       25 |   mtspr(reg, line);
	  |   ^~~~~
    ./arch/openrisc/include/asm/spr.h:16:27: error: impossible constraint in 'asm'
       16 | #define mtspr(_spr, _val) __asm__ __volatile__ (  \
	  |                           ^~~~~~~
    arch/openrisc/mm/cache.c:25:3: note: in expansion of macro 'mtspr'
       25 |   mtspr(reg, line);
	  |   ^~~~~
    make[1]: *** [scripts/Makefile.build:283: arch/openrisc/mm/cache.o] Error 1

The asm constraint "K" requires a immediate constant argument to mtspr,
however because of no inlining a register argument is passed causing a
failure.  Fix this by using __always_inline.

Link: https://lore.kernel.org/lkml/202008200453.ohnhqkjQ%25lkp@intel.com/
Signed-off-by: Stafford Horne 
Signed-off-by: Sasha Levin