linux-stable.git/arch/openrisc, branch linux-3.16.y

openrisc: drop _PAGE_FILE and pte_file()-related helpers

2018-10-03T03:09:56+00:00

commit 3824e3cf7e865b2ff0b71de23b16e332fe6a853a upstream.

We've replaced remap_file_pages(2) implementation with emulation.  Nobody
creates non-linear mapping anymore.

Signed-off-by: Kirill A. Shutemov 
Cc: Jonas Bonn 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Ben Hutchings

signal/openrisc: Fix do_unaligned_access to send the proper signal

2018-06-16T21:21:52+00:00

commit 500d58300571b6602341b041f97c082a461ef994 upstream.

While reviewing the signal sending on openrisc the do_unaligned_access
function stood out because it is obviously wrong.  A comment about an
si_code set above when actually si_code is never set.  Leading to a
random si_code being sent to userspace in the event of an unaligned
access.

Looking further SIGBUS BUS_ADRALN is the proper pair of signal and
si_code to send for an unaligned access. That is what other
architectures do and what is required by posix.

Given that do_unaligned_access is broken in a way that no one can be
relying on it on openrisc fix the code to just do the right thing.

Fixes: 769a8a96229e ("OpenRISC: Traps")
Cc: Jonas Bonn 
Cc: Stefan Kristiansson 
Cc: Stafford Horne 
Cc: Arnd Bergmann 
Cc: openrisc@lists.librecores.org
Acked-by: Stafford Horne 
Signed-off-by: "Eric W. Biederman" 
Signed-off-by: Ben Hutchings

openrisc: fix the fix of copy_from_user()

2016-11-20T01:17:32+00:00

commit 8e4b72054f554967827e18be1de0e8122e6efc04 upstream.

Since commit acb2505d0119 ("openrisc: fix copy_from_user()"),
copy_from_user() returns the number of bytes requested, not the
number of bytes not copied.

Cc: Al Viro 
Fixes: acb2505d0119 ("openrisc: fix copy_from_user()")
Signed-off-by: Guenter Roeck 
Signed-off-by: Ben Hutchings

openrisc: fix copy_from_user()

2016-11-20T01:17:28+00:00

commit acb2505d0119033a80c85ac8d02dccae41271667 upstream.

... that should zero on faults.  Also remove the  helpful
logics wrt range truncation copied from ppc32.  Where it had ever
been needed only in case of copy_from_user() *and* had not been merged
into the mainline until a month after the need had disappeared.
A decade before openrisc went into mainline, I might add...

Signed-off-by: Al Viro 
Signed-off-by: Ben Hutchings

openrisc: fix CONFIG_UID16 setting

2016-02-03T09:51:34+00:00

commit 04ea1e91f85615318ea91ce8ab50cb6a01ee4005 upstream.

openrisc-allnoconfig:

  kernel/uid16.c: In function 'SYSC_setgroups16':
  kernel/uid16.c:184:2: error: implicit declaration of function 'groups_alloc'
  kernel/uid16.c:184:13: warning: assignment makes pointer from integer without a cast

openrisc shouldn't be setting CONFIG_UID16 when CONFIG_MULTIUSER=n.

Fixes: 2813893f8b197a1 ("kernel: conditionally support non-root users, groups and capabilities")
Reported-by: Fengguang Wu 
Cc: Iulia Manda 
Cc: Josh Triplett 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Luis Henriques

vm: add VM_FAULT_SIGSEGV handling support

2015-02-04T10:58:27+00:00

commit 33692f27597fcab536d7cbbcc8f52905133e4aa7 upstream.

The core VM already knows about VM_FAULT_SIGBUS, but cannot return a
"you should SIGSEGV" error, because the SIGSEGV case was generally
handled by the caller - usually the architecture fault handler.

That results in lots of duplication - all the architecture fault
handlers end up doing very similar "look up vma, check permissions, do
retries etc" - but it generally works.  However, there are cases where
the VM actually wants to SIGSEGV, and applications _expect_ SIGSEGV.

In particular, when accessing the stack guard page, libsigsegv expects a
SIGSEGV.  And it usually got one, because the stack growth is handled by
that duplicated architecture fault handler.

However, when the generic VM layer started propagating the error return
from the stack expansion in commit fee7e49d4514 ("mm: propagate error
from stack expansion even for guard page"), that now exposed the
existing VM_FAULT_SIGBUS result to user space.  And user space really
expected SIGSEGV, not SIGBUS.

To fix that case, we need to add a VM_FAULT_SIGSEGV, and teach all those
duplicate architecture fault handlers about it.  They all already have
the code to handle SIGSEGV, so it's about just tying that new return
value to the existing code, but it's all a bit annoying.

This is the mindless minimal patch to do this.  A more extensive patch
would be to try to gather up the mostly shared fault handling logic into
one generic helper routine, and long-term we really should do that
cleanup.

Just from this patch, you can generally see that most architectures just
copied (directly or indirectly) the old x86 way of doing things, but in
the meantime that original x86 model has been improved to hold the VM
semaphore for shorter times etc and to handle VM_FAULT_RETRY and other
"newer" things, so it would be a good idea to bring all those
improvements to the generic case and teach other architectures about
them too.

Reported-and-tested-by: Takashi Iwai 
Tested-by: Jan Engelhardt 
Acked-by: Heiko Carstens  # "s390 still compiles and boots"
Cc: linux-arch@vger.kernel.org
Signed-off-by: Linus Torvalds 
[ luis: backported to 3.16:
  - file renamed: arch/powerpc/mm/copro_fault.c ->
    arch/powerpc/platforms/cell/spu_fault.c
  - dropped changes to arch/nios2/mm/fault.c ]
Signed-off-by: Luis Henriques

Merge tag 'devicetree-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux into next

2014-06-04T17:02:38+00:00

Pull DeviceTree updates from Rob Herring:
- Another round of clean-up of FDT related code in architecture code.
This removes knowledge of internal FDT details from most
architectures except powerpc.
- Conversion of kernel's custom FDT parsing code to use libfdt.
- DT based initialization for generic serial earlycon. The
introduction of generic serial earlycon support went in through the
tty tree.
- Improve the platform device naming for DT probed devices to ensure
unique naming and use parent names instead of a global index.
- Fix a race condition in of_update_property.
- Unify the various linker section OF match tables and fix several
function prototype errors.
- Update platform_get_irq_byname to work in deferred probe cases.
- 2 binding doc updates

* tag 'devicetree-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (58 commits)
of: handle NULL node in next_child iterators
of/irq: provide more wrappers for !CONFIG_OF
devicetree: bindings: Document micrel vendor prefix
dt: bindings: dwc2: fix required value for the phy-names property
of_pci_irq: kill useless variable in of_irq_parse_pci()
of/irq: do irq resolution in platform_get_irq_byname()
of: Add a testcase for of_find_node_by_path()
of: Make of_find_node_by_path() handle /aliases
of: Create unlocked version of for_each_child_of_node()
lib: add glibc style strchrnul() variant
of: Handle memory@0 node on PPC32 only
pci/of: Remove dead code
of: fix race between search and remove in of_update_property()
of: Use NULL for pointers
of: Stop naming platform_device using dcr address
of: Ensure unique names without sacrificing determinism
tty/serial: pl011: add DT based earlycon support
of/fdt: add FDT serial scanning for earlycon
of/fdt: add FDT address translation support
serial: earlycon: add DT support
...

of/fdt: consolidate built-in dtb section variables

2014-04-30T05:59:13+00:00

Unify the various architectures __dtb_start and __dtb_end definitions
moving them into of_fdt.h.

Signed-off-by: Rob Herring 
Acked-by: Vineet Gupta 
Acked-by: James Hogan 
Tested-by: Michal Simek 
Cc: Ralf Baechle 
Cc: Jonas Bonn 
Cc: Chris Zankel 
Cc: Max Filippov 
Cc: linux-metag@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux@lists.openrisc.net
Cc: linux-xtensa@linux-xtensa.org
Tested-by: Grant Likely 
Tested-by: Stephen Chivers

arch,openrisc: Convert smp_mb__*()

2014-04-18T12:20:40+00:00

Openrisc fully relies on asm-generic/barrier.h and therefore its
smp_mb() is barrier().

Signed-off-by: Peter Zijlstra 
Acked-by: Paul E. McKenney 
Link: http://lkml.kernel.org/n/tip-sxgxgqag9tond4kji07d22oh@git.kernel.org
Cc: Jonas Bonn 
Cc: Linus Torvalds 
Cc: linux-kernel@vger.kernel.org
Cc: linux@lists.openrisc.net
Signed-off-by: Ingo Molnar

Kconfig: rename HAS_IOPORT to HAS_IOPORT_MAP

2014-04-07T23:36:11+00:00

If the renamed symbol is defined lib/iomap.c implements ioport_map and
ioport_unmap and currently (nearly) all platforms define the port
accessor functions outb/inb and friend unconditionally.  So
HAS_IOPORT_MAP is the better name for this.

Consequently NO_IOPORT is renamed to NO_IOPORT_MAP.

The motivation for this change is to reintroduce a symbol HAS_IOPORT
that signals if outb/int et al are available.  I will address that at
least one merge window later though to keep surprises to a minimum and
catch new introductions of (HAS|NO)_IOPORT.

The changes in this commit were done using:

	$ git grep -l -E '(NO|HAS)_IOPORT' | xargs perl -p -i -e 's/\b((?:CONFIG_)?(?:NO|HAS)_IOPORT)\b/$1_MAP/'

Signed-off-by: Uwe Kleine-König 
Acked-by: Arnd Bergmann 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds