linux-stable.git/arch/openrisc/kernel, branch linux-4.9.y

openrisc: start CPU timer early in boot

2022-06-14T14:52:29+00:00

[ Upstream commit 516dd4aacd67a0f27da94f3fe63fe0f4dbab6e2b ]

In order to measure the boot process, the timer should be switched on as
early in boot as possible. As well, the commit defines the get_cycles
macro, like the previous patches in this series, so that generic code is
aware that it's implemented by the platform, as is done on other archs.

Cc: Thomas Gleixner 
Cc: Arnd Bergmann 
Cc: Jonas Bonn 
Cc: Stefan Kristiansson 
Acked-by: Stafford Horne 
Reported-by: Guenter Roeck 
Signed-off-by: Jason A. Donenfeld 
Signed-off-by: Sasha Levin

openrisc: don't printk() unconditionally

2021-09-22T09:43:04+00:00

[ Upstream commit 946e1052cdcc7e585ee5d1e72528ca49fb295243 ]

Don't call printk() when CONFIG_PRINTK is not set.
Fixes the following build errors:

or1k-linux-ld: arch/openrisc/kernel/entry.o: in function `_external_irq_handler':
(.text+0x804): undefined reference to `printk'
(.text+0x804): relocation truncated to fit: R_OR1K_INSN_REL_26 against undefined symbol `printk'

Fixes: 9d02a4283e9c ("OpenRISC: Boot code")
Signed-off-by: Randy Dunlap 
Reported-by: kernel test robot 
Cc: Jonas Bonn 
Cc: Stefan Kristiansson 
Cc: Stafford Horne 
Cc: openrisc@lists.librecores.org
Signed-off-by: Stafford Horne 
Signed-off-by: Sasha Levin

openrisc: Fix a memory leak

2021-05-26T09:29:05+00:00

[ Upstream commit c019d92457826bb7b2091c86f36adb5de08405f9 ]

'setup_find_cpu_node()' take a reference on the node it returns.
This reference must be decremented when not needed anymore, or there will
be a leak.

Add the missing 'of_node_put(cpu)'.

Note that 'setup_cpuinfo()' that also calls this function already has a
correct 'of_node_put(cpu)' at its end.

Fixes: 9d02a4283e9c ("OpenRISC: Boot code")
Signed-off-by: Christophe JAILLET 
Signed-off-by: Stafford Horne 
Signed-off-by: Sasha Levin

openrisc: Fix issue with argument clobbering for clone/fork

2020-06-30T19:38:28+00:00

[ Upstream commit 6bd140e14d9aaa734ec37985b8b20a96c0ece948 ]

Working on the OpenRISC glibc port I found that sometimes clone was
working strange.  That the tls data argument sent in r7 was always
wrong.  Further investigation revealed that the arguments were getting
clobbered in the entry code.  This patch removes the code that writes to
the argument registers.  This was likely due to some old code hanging
around.

This patch fixes this up for clone and fork.  This fork clobber is
harmless but also useless so remove.

Signed-off-by: Stafford Horne 
Signed-off-by: Sasha Levin

openrisc: Fix broken paths to arch/or32

2019-12-05T14:34:41+00:00

[ Upstream commit 57ce8ba0fd3a95bf29ed741df1c52bd591bf43ff ]

OpenRISC was mainlined as "openrisc", not "or32".
vmlinux.lds is generated from vmlinux.lds.S.

Signed-off-by: Geert Uytterhoeven 
Signed-off-by: Stafford Horne 
Signed-off-by: Sasha Levin

kthread: fix boot hang (regression) on MIPS/OpenRISC

2018-09-19T20:47:11+00:00

commit b0f5a8f32e8bbdaae1abb8abe2d3cbafaba57e08 upstream.

This fixes a regression in commit 4d6501dce079 where I didn't notice
that MIPS and OpenRISC were reinitialising p->{set,clear}_child_tid to
NULL after our initialisation in copy_process().

We can simply get rid of the arch-specific initialisation here since it
is now always done in copy_process() before hitting copy_thread{,_tls}().

Review notes:

 - As far as I can tell, copy_process() is the only user of
   copy_thread_tls(), which is the only caller of copy_thread() for
   architectures that don't implement copy_thread_tls().

 - After this patch, there is no arch-specific code touching
   p->set_child_tid or p->clear_child_tid whatsoever.

 - It may look like MIPS/OpenRISC wanted to always have these fields be
   NULL, but that's not true, as copy_process() would unconditionally
   set them again _after_ calling copy_thread_tls() before commit
   4d6501dce079.

Fixes: 4d6501dce079c1eb6bf0b1d8f528a5e81770109e ("kthread: Fix use-after-free if kthread fork fails")
Reported-by: Guenter Roeck 
Tested-by: Guenter Roeck  # MIPS only
Acked-by: Stafford Horne 
Acked-by: Oleg Nesterov 
Cc: Ralf Baechle 
Cc: linux-mips@linux-mips.org
Cc: Jonas Bonn 
Cc: Stefan Kristiansson 
Cc: openrisc@lists.librecores.org
Cc: Jamie Iles 
Cc: Thomas Gleixner 
Signed-off-by: Vegard Nossum 
Signed-off-by: Linus Torvalds 
Signed-off-by: Amit Pundir 
Signed-off-by: Greg Kroah-Hartman

signal/openrisc: Fix do_unaligned_access to send the proper signal

2018-02-17T12:21:19+00:00

commit 500d58300571b6602341b041f97c082a461ef994 upstream.

While reviewing the signal sending on openrisc the do_unaligned_access
function stood out because it is obviously wrong.  A comment about an
si_code set above when actually si_code is never set.  Leading to a
random si_code being sent to userspace in the event of an unaligned
access.

Looking further SIGBUS BUS_ADRALN is the proper pair of signal and
si_code to send for an unaligned access. That is what other
architectures do and what is required by posix.

Given that do_unaligned_access is broken in a way that no one can be
relying on it on openrisc fix the code to just do the right thing.

Fixes: 769a8a96229e ("OpenRISC: Traps")
Cc: Jonas Bonn 
Cc: Stefan Kristiansson 
Cc: Stafford Horne 
Cc: Arnd Bergmann 
Cc: openrisc@lists.librecores.org
Acked-by: Stafford Horne 
Signed-off-by: "Eric W. Biederman" 
Signed-off-by: Greg Kroah-Hartman

openrisc: Add _text symbol to fix ksym build error

2017-08-07T01:59:46+00:00

[ Upstream commit 086cc1c31a0ec075dac02425367c871bb65bc2c9 ]

The build robot reports:

   .tmp_kallsyms1.o: In function `kallsyms_relative_base':
>> (.rodata+0x8a18): undefined reference to `_text'

This is when using 'make alldefconfig'. Adding this _text symbol to mark
the start of the kernel as in other architecture fixes this.

Signed-off-by: Stafford Horne 
Acked-by: Jonas Bonn 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

nmi_backtrace: generate one-line reports for idle cpus

2016-10-08T01:46:30+00:00

When doing an nmi backtrace of many cores, most of which are idle, the
output is a little overwhelming and very uninformative.  Suppress
messages for cpus that are idling when they are interrupted and just
emit one line, "NMI backtrace for N skipped: idling at pc 0xNNN".

We do this by grouping all the cpuidle code together into a new
.cpuidle.text section, and then checking the address of the interrupted
PC to see if it lies within that section.

This commit suitably tags x86 and tile idle routines, and only adds in
the minimal framework for other architectures.

Link: http://lkml.kernel.org/r/1472487169-14923-5-git-send-email-cmetcalf@mellanox.com
Signed-off-by: Chris Metcalf 
Acked-by: Peter Zijlstra (Intel) 
Tested-by: Peter Zijlstra (Intel) 
Tested-by: Daniel Thompson  [arm]
Tested-by: Petr Mladek 
Cc: Aaron Tomlin 
Cc: Peter Zijlstra (Intel) 
Cc: "Rafael J. Wysocki" 
Cc: Russell King 
Cc: Thomas Gleixner 
Cc: Ingo Molnar 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

dma-mapping: use unsigned long for dma_attrs

2016-08-04T12:50:07+00:00

The dma-mapping core and the implementations do not change the DMA
attributes passed by pointer.  Thus the pointer can point to const data.
However the attributes do not have to be a bitfield.  Instead unsigned
long will do fine:

1. This is just simpler.  Both in terms of reading the code and setting
   attributes.  Instead of initializing local attributes on the stack
   and passing pointer to it to dma_set_attr(), just set the bits.

2. It brings safeness and checking for const correctness because the
   attributes are passed by value.

Semantic patches for this change (at least most of them):

    virtual patch
    virtual context

    @r@
    identifier f, attrs;

    @@
    f(...,
    - struct dma_attrs *attrs
    + unsigned long attrs
    , ...)
    {
    ...
    }

    @@
    identifier r.f;
    @@
    f(...,
    - NULL
    + 0
     )

and

    // Options: --all-includes
    virtual patch
    virtual context

    @r@
    identifier f, attrs;
    type t;

    @@
    t f(..., struct dma_attrs *attrs);

    @@
    identifier r.f;
    @@
    f(...,
    - NULL
    + 0
     )

Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com
Signed-off-by: Krzysztof Kozlowski 
Acked-by: Vineet Gupta 
Acked-by: Robin Murphy 
Acked-by: Hans-Christian Noren Egtvedt 
Acked-by: Mark Salter  [c6x]
Acked-by: Jesper Nilsson  [cris]
Acked-by: Daniel Vetter  [drm]
Reviewed-by: Bart Van Assche 
Acked-by: Joerg Roedel  [iommu]
Acked-by: Fabien Dessenne  [bdisp]
Reviewed-by: Marek Szyprowski  [vb2-core]
Acked-by: David Vrabel  [xen]
Acked-by: Konrad Rzeszutek Wilk  [xen swiotlb]
Acked-by: Joerg Roedel  [iommu]
Acked-by: Richard Kuo  [hexagon]
Acked-by: Geert Uytterhoeven  [m68k]
Acked-by: Gerald Schaefer  [s390]
Acked-by: Bjorn Andersson 
Acked-by: Hans-Christian Noren Egtvedt  [avr32]
Acked-by: Vineet Gupta  [arc]
Acked-by: Robin Murphy  [arm64 and dma-iommu]
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds