linux-stable.git/arch/openrisc/kernel/traps.c, branch linux-5.2.y

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

2019-05-30T18:26:32+00:00

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Allison Randal 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman

arch: mostly remove

2019-04-23T19:51:40+00:00

A few architectures use  internally, but nothing in
common code does. Remove all the empty or almost empty versions of it,
including the asm-generic one.

Signed-off-by: Christoph Hellwig 
Signed-off-by: Arnd Bergmann

openrisc: entry: Fix delay slot exception detection

2018-07-01T07:48:24+00:00

Originally in patch e6d20c55a4 ("openrisc: entry: Fix delay slot
detection") I fixed delay slot detection, but only for QEMU.  We missed
that hardware delay slot detection using delay slot exception flag (DSX)
was still broken.  This was because QEMU set the DSX flag in both
pre-exception supervision register (ESR) and supervision register (SR)
register, but on real hardware the DSX flag is only set on the SR
register during exceptions.

Fix this by carrying the DSX flag into the SR register during exception.
We also update the DSX flag read locations to read the value from the SR
register not the pt_regs SR register which represents ESR.  The ESR
should never have the DSX flag set.

In the process I updated/removed a few comments to match the current
state.  Including removing a comment saying that the DSX detection logic
was inefficient and needed to be rewritten.

I have tested this on QEMU with a patch ensuring it matches the hardware
specification.

Link: https://lists.gnu.org/archive/html/qemu-devel/2018-07/msg00000.html
Fixes: e6d20c55a4 ("openrisc: entry: Fix delay slot detection")
Signed-off-by: Stafford Horne

signal/openrisc: Use force_sig_fault where appropriate

2018-04-25T15:44:05+00:00

Filling in struct siginfo before calling force_sig_info a tedious and
error prone process, where once in a great while the wrong fields
are filled out, and siginfo has been inconsistently cleared.

Simplify this process by using the helper force_sig_fault.  Which
takes as a parameters all of the information it needs, ensures
all of the fiddly bits of filling in struct siginfo are done properly
and then calls force_sig_info.

In short about a 5 line reduction in code for every time force_sig_info
is called, which makes the calling function clearer.

Cc: Jonas Bonn 
Cc: Stefan Kristiansson 
Cc: Stafford Horne 
Cc: openrisc@lists.librecores.org
Signed-off-by: "Eric W. Biederman"

signal: Ensure every siginfo we send has all bits initialized

2018-04-25T15:40:51+00:00

Call clear_siginfo to ensure every stack allocated siginfo is properly
initialized before being passed to the signal sending functions.

Note: It is not safe to depend on C initializers to initialize struct
siginfo on the stack because C is allowed to skip holes when
initializing a structure.

The initialization of struct siginfo in tracehook_report_syscall_exit
was moved from the helper user_single_step_siginfo into
tracehook_report_syscall_exit itself, to make it clear that the local
variable siginfo gets fully initialized.

In a few cases the scope of struct siginfo has been reduced to make it
clear that siginfo siginfo is not used on other paths in the function
in which it is declared.

Instances of using memset to initialize siginfo have been replaced
with calls clear_siginfo for clarity.

Signed-off-by: "Eric W. Biederman"

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk

2018-02-01T21:36:15+00:00

Pull printk updates from Petr Mladek:

 - Add a console_msg_format command line option:

     The value "default" keeps the old "[time stamp] text\n" format. The
     value "syslog" allows to see the syslog-like "[timestamp] text" format.

     This feature was requested by people doing regression tests, for
     example, 0day robot. They want to have both filtered and full logs
     at hands.

 - Reduce the risk of softlockup:

     Pass the console owner in a busy loop.

     This is a new approach to the old problem. It was first proposed by
     Steven Rostedt on Kernel Summit 2017. It marks a context in which
     the console_lock owner calls console drivers and could not sleep.
     On the other side, printk() callers could detect this state and use
     a busy wait instead of a simple console_trylock(). Finally, the
     console_lock owner checks if there is a busy waiter at the end of
     the special context and eventually passes the console_lock to the
     waiter.

     The hand-off works surprisingly well and helps in many situations.
     Well, there is still a possibility of the softlockup, for example,
     when the flood of messages stops and the last owner still has too
     much to flush.

     There is increasing number of people having problems with
     printk-related softlockups. We might eventually need to get better
     solution. Anyway, this looks like a good start and promising
     direction.

 - Do not allow to schedule in console_unlock() called from printk():

     This reverts an older controversial commit. The reschedule helped
     to avoid softlockups. But it also slowed down the console output.
     This patch is obsoleted by the new console waiter logic described
     above. In fact, the reschedule made the hand-off less effective.

 - Deprecate "%pf" and "%pF" format specifier:

     It was needed on ia64, ppc64 and parisc64 to dereference function
     descriptors and show the real function address. It is done
     transparently by "%ps" and "pS" format specifier now.

     Sergey Senozhatsky found that all the function descriptors were in
     a special elf section and could be easily detected.

 - Remove printk_symbol() API:

     It has been obsoleted by "%pS" format specifier, and this change
     helped to remove few continuous lines and a less intuitive old API.

 - Remove redundant memsets:

     Sergey removed unnecessary memset when processing printk.devkmsg
     command line option.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: (27 commits)
  printk: drop redundant devkmsg_log_str memsets
  printk: Never set console_may_schedule in console_trylock()
  printk: Hide console waiter logic into helpers
  printk: Add console owner and waiter logic to load balance console writes
  kallsyms: remove print_symbol() function
  checkpatch: add pF/pf deprecation warning
  symbol lookup: introduce dereference_symbol_descriptor()
  parisc64: Add .opd based function descriptor dereference
  powerpc64: Add .opd based function descriptor dereference
  ia64: Add .opd based function descriptor dereference
  sections: split dereference_function_descriptor()
  openrisc: Fix conflicting types for _exext and _stext
  lib: do not use print_symbol()
  irq debug: do not use print_symbol()
  sysfs: do not use print_symbol()
  drivers: do not use print_symbol()
  x86: do not use print_symbol()
  unicore32: do not use print_symbol()
  sh: do not use print_symbol()
  mn10300: do not use print_symbol()
  ...

signal/openrisc: Fix do_unaligned_access to send the proper signal

2018-01-12T20:20:02+00:00

While reviewing the signal sending on openrisc the do_unaligned_access
function stood out because it is obviously wrong.  A comment about an
si_code set above when actually si_code is never set.  Leading to a
random si_code being sent to userspace in the event of an unaligned
access.

Looking further SIGBUS BUS_ADRALN is the proper pair of signal and
si_code to send for an unaligned access. That is what other
architectures do and what is required by posix.

Given that do_unaligned_access is broken in a way that no one can be
relying on it on openrisc fix the code to just do the right thing.

Cc: stable@vger.kernel.org
Fixes: 769a8a96229e ("OpenRISC: Traps")
Cc: Jonas Bonn 
Cc: Stefan Kristiansson 
Cc: Stafford Horne 
Cc: Arnd Bergmann 
Cc: openrisc@lists.librecores.org
Acked-by: Stafford Horne 
Signed-off-by: "Eric W. Biederman"

openrisc: Fix conflicting types for _exext and _stext

2018-01-09T09:40:02+00:00

The printk tree in linux-next has a patch "symbol lookup: introduce
dereference_symbol_descriptor()" that includes sections.h in kallsyms.h,
so arch/openrisc/kernel/traps.c gets a second extern definition for
_etext and _stext.

Remove the local definitions and include sections.h directly in
preparation for the kallsyms.h change.

This fixes the following (future) build error:

  CC      arch/openrisc/kernel/traps.o
arch/openrisc/kernel/traps.c:43:13: error: conflicting types for ‘_etext’
 extern char _etext, _stext;
             ^
In file included from ./arch/openrisc/include/generated/asm/sections.h:1:0,
                 from ./include/linux/kallsyms.h:15,
                 from arch/openrisc/kernel/traps.c:35:
./include/asm-generic/sections.h:35:32: note: previous declaration of ‘_etext’ was here
 extern char _text[], _stext[], _etext[];
                                ^

Signed-off-by: Joel Stanley 
Reviewed-by: Sergey Senozhatsky 
Acked-by: Stafford Horne 
Signed-off-by: Petr Mladek

openrisc: support framepointers and STACKTRACE_SUPPORT

2017-11-03T05:01:15+00:00

For lockdep support a reliable stack trace mechanism is needed.  This
patch adds support in OpenRISC for the stacktrace framework, implemented
by a simple unwinder api.  The unwinder api supports both framepointer
and basic stack tracing.

The unwinder is now used to replace the stack_dump() implementation as
well. The new traces are inline with other architectures trace format:

 Call trace:
 [] show_stack+0x3c/0x58
 [] dump_stack+0xa8/0xe4
 [] __cpu_up+0x64/0x130
 [] bringup_cpu+0x3c/0x178
 [] cpuhp_invoke_callback+0xa8/0x1fc
 [] cpuhp_up_callbacks+0x44/0x14c
 [] cpu_up+0x14c/0x1bc
 [] smp_init+0x104/0x15c
 [] ? kernel_init+0x0/0x140
 [] kernel_init_freeable+0xbc/0x25c
 [] ? kernel_init+0x0/0x140
 [] kernel_init+0x1c/0x140
 [] ? schedule_tail+0x18/0xa0
 [] ret_from_fork+0x1c/0x9c

Signed-off-by: Stafford Horne

sched/headers: Prepare to move kstack_end() from to

2017-03-02T07:42:39+00:00

But first update the usage sites with the new header dependency.

Acked-by: Linus Torvalds 
Cc: Mike Galbraith 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar