linux-stable.git/arch/openrisc/include, branch linux-4.9.y

openrisc: start CPU timer early in boot

2022-06-14T14:52:29+00:00

[ Upstream commit 516dd4aacd67a0f27da94f3fe63fe0f4dbab6e2b ]

In order to measure the boot process, the timer should be switched on as
early in boot as possible. As well, the commit defines the get_cycles
macro, like the previous patches in this series, so that generic code is
aware that it's implemented by the platform, as is done on other archs.

Cc: Thomas Gleixner 
Cc: Arnd Bergmann 
Cc: Jonas Bonn 
Cc: Stefan Kristiansson 
Acked-by: Stafford Horne 
Reported-by: Guenter Roeck 
Signed-off-by: Jason A. Donenfeld 
Signed-off-by: Sasha Levin

openrisc: Define memory barrier mb

2021-06-03T06:23:32+00:00

[ Upstream commit 8b549c18ae81dbc36fb11e4aa08b8378c599ca95 ]

This came up in the discussion of the requirements of qspinlock on an
architecture.  OpenRISC uses qspinlock, but it was noticed that the
memmory barrier was not defined.

Peter defined it in the mail thread writing:

    As near as I can tell this should do. The arch spec only lists
    this one instruction and the text makes it sound like a completion
    barrier.

This is correct so applying this patch.

Signed-off-by: Peter Zijlstra 
[shorne@gmail.com:Turned the mail into a patch]
Signed-off-by: Stafford Horne 
Signed-off-by: Sasha Levin

openrisc: fix issue handling 8 byte get_user calls

2017-12-20T09:07:22+00:00

[ Upstream commit 154e67cd8e8f964809d0e75e44bb121b169c75b3 ]

Was getting the following error with allmodconfig:

  ERROR: "__get_user_bad" [lib/test_user_copy.ko] undefined!

This was simply a missing break statement, causing an unwanted fall
through.

Signed-off-by: Stafford Horne 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

openrisc: Define __ro_after_init to avoid crash

2016-11-06T16:01:12+00:00

openrisc qemu tests fail with the following crash.

Unable to handle kernel access at virtual address 0xc0300c34

Oops#: 0001
CPU #: 0
   PC: c016c710    SR: 0000ae67    SP: c1017e04
   GPR00: 00000000 GPR01: c1017e04 GPR02: c0300c34 GPR03: c0300c34
   GPR04: 00000000 GPR05: c0300cb0 GPR06: c0300c34 GPR07: 000000ff
   GPR08: c107f074 GPR09: c0199ef4 GPR10: c1016000 GPR11: 00000000
   GPR12: 00000000 GPR13: c107f044 GPR14: c0473774 GPR15: 07ce0000
   GPR16: 00000000 GPR17: c107ed8a GPR18: 00009600 GPR19: c107f044
   GPR20: c107ee74 GPR21: 00000003 GPR22: c0473770 GPR23: 00000033
   GPR24: 000000bf GPR25: 00000019 GPR26: c046400c GPR27: 00000001
   GPR28: c0464028 GPR29: c1018000 GPR30: 00000006 GPR31: ccf37483
     RES: 00000000 oGPR11: ffffffff
     Process swapper (pid: 1, stackpage=c1001960)

     Stack: Stack dump [0xc1017cf8]:
     sp + 00: 0xc1017e04
     sp + 04: 0xc0300c34
     sp + 08: 0xc0300c34
     sp + 12: 0x00000000
...

Bisect points to commit d2ec3f77de8e ("pty: make ptmx file ops read-only
after init"). Fix by defining __ro_after_init for the openrisc
architecture, similar to parisc.

Fixes: d2ec3f77de8e ("pty: make ptmx file ops read-only after init")
Cc: Kees Cook 
Signed-off-by: Guenter Roeck 
Acked-by: Stafford Horne

exceptions: detritus removal

2016-09-28T01:15:14+00:00

externs and defines for stuff that is never used

Signed-off-by: Al Viro

openrisc: fix the fix of copy_from_user()

2016-09-18T14:26:42+00:00

Since commit acb2505d0119 ("openrisc: fix copy_from_user()"),
copy_from_user() returns the number of bytes requested, not the
number of bytes not copied.

Cc: Al Viro 
Fixes: acb2505d0119 ("openrisc: fix copy_from_user()")
Signed-off-by: Guenter Roeck

openrisc: fix copy_from_user()

2016-09-13T21:49:44+00:00

... that should zero on faults.  Also remove the  helpful
logics wrt range truncation copied from ppc32.  Where it had ever
been needed only in case of copy_from_user() *and* had not been merged
into the mainline until a month after the need had disappeared.
A decade before openrisc went into mainline, I might add...

Cc: stable@vger.kernel.org
Signed-off-by: Al Viro

tree wide: get rid of __GFP_REPEAT for order-0 allocations part I

2016-06-25T00:23:52+00:00

This is the third version of the patchset previously sent [1].  I have
basically only rebased it on top of 4.7-rc1 tree and dropped "dm: get
rid of superfluous gfp flags" which went through dm tree.  I am sending
it now because it is tree wide and chances for conflicts are reduced
considerably when we want to target rc2.  I plan to send the next step
and rename the flag and move to a better semantic later during this
release cycle so we will have a new semantic ready for 4.8 merge window
hopefully.

Motivation:

While working on something unrelated I've checked the current usage of
__GFP_REPEAT in the tree.  It seems that a majority of the usage is and
always has been bogus because __GFP_REPEAT has always been about costly
high order allocations while we are using it for order-0 or very small
orders very often.  It seems that a big pile of them is just a
copy&paste when a code has been adopted from one arch to another.

I think it makes some sense to get rid of them because they are just
making the semantic more unclear.  Please note that GFP_REPEAT is
documented as

* __GFP_REPEAT: Try hard to allocate the memory, but the allocation attempt

* _might_ fail.  This depends upon the particular VM implementation.
  while !costly requests have basically nofail semantic.  So one could
  reasonably expect that order-0 request with __GFP_REPEAT will not loop
  for ever.  This is not implemented right now though.

I would like to move on with __GFP_REPEAT and define a better semantic
for it.

  $ git grep __GFP_REPEAT origin/master | wc -l
  111
  $ git grep __GFP_REPEAT | wc -l
  36

So we are down to the third after this patch series.  The remaining
places really seem to be relying on __GFP_REPEAT due to large allocation
requests.  This still needs some double checking which I will do later
after all the simple ones are sorted out.

I am touching a lot of arch specific code here and I hope I got it right
but as a matter of fact I even didn't compile test for some archs as I
do not have cross compiler for them.  Patches should be quite trivial to
review for stupid compile mistakes though.  The tricky parts are usually
hidden by macro definitions and thats where I would appreciate help from
arch maintainers.

[1] http://lkml.kernel.org/r/1461849846-27209-1-git-send-email-mhocko@kernel.org

This patch (of 19):

__GFP_REPEAT has a rather weak semantic but since it has been introduced
around 2.6.12 it has been ignored for low order allocations.  Yet we
have the full kernel tree with its usage for apparently order-0
allocations.  This is really confusing because __GFP_REPEAT is
explicitly documented to allow allocation failures which is a weaker
semantic than the current order-0 has (basically nofail).

Let's simply drop __GFP_REPEAT from those places.  This would allow to
identify place which really need allocator to retry harder and formulate
a more specific semantic for what the flag is supposed to do actually.

Link: http://lkml.kernel.org/r/1464599699-30131-2-git-send-email-mhocko@kernel.org
Signed-off-by: Michal Hocko 
Cc: "David S. Miller" 
Cc: "H. Peter Anvin" 
Cc: "James E.J. Bottomley" 
Cc: "Theodore Ts'o" 
Cc: Andy Lutomirski 
Cc: Benjamin Herrenschmidt 
Cc: Catalin Marinas 
Cc: Chen Liqin 
Cc: Chris Metcalf  [for tile]
Cc: Guan Xuetao 
Cc: Heiko Carstens 
Cc: Helge Deller 
Cc: Ingo Molnar 
Cc: Jan Kara 
Cc: John Crispin 
Cc: Lennox Wu 
Cc: Ley Foon Tan 
Cc: Martin Schwidefsky 
Cc: Matt Fleming 
Cc: Ralf Baechle 
Cc: Rich Felker 
Cc: Russell King 
Cc: Thomas Gleixner 
Cc: Vineet Gupta 
Cc: Will Deacon 
Cc: Yoshinori Sato 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge tag 'asm-generic-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

2016-05-24T22:24:37+00:00

Pull asm-generic cleanup from Arnd Bergmann:
 "I have only one patch for asm-generic in this release, this one is
  from James Hogan and updates the generic system call table for
  renameat2 so we don't need to provide both renameat and renameat2 in
  newly added architectures"

* tag 'asm-generic-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  asm-generic: Drop renameat syscall from default list

exit_thread: remove empty bodies

2016-05-21T00:58:30+00:00

Define HAVE_EXIT_THREAD for archs which want to do something in
exit_thread. For others, let's define exit_thread as an empty inline.

This is a cleanup before we change the prototype of exit_thread to
accept a task parameter.

[akpm@linux-foundation.org: fix mips]
Signed-off-by: Jiri Slaby 
Cc: "David S. Miller" 
Cc: "H. Peter Anvin" 
Cc: "James E.J. Bottomley" 
Cc: Aurelien Jacquiot 
Cc: Benjamin Herrenschmidt 
Cc: Catalin Marinas 
Cc: Chen Liqin 
Cc: Chris Metcalf 
Cc: Chris Zankel 
Cc: David Howells 
Cc: Fenghua Yu 
Cc: Geert Uytterhoeven 
Cc: Guan Xuetao 
Cc: Haavard Skinnemoen 
Cc: Hans-Christian Egtvedt 
Cc: Heiko Carstens 
Cc: Helge Deller 
Cc: Ingo Molnar 
Cc: Ivan Kokshaysky 
Cc: James Hogan 
Cc: Jeff Dike 
Cc: Jesper Nilsson 
Cc: Jiri Slaby 
Cc: Jonas Bonn 
Cc: Koichi Yasutake 
Cc: Lennox Wu 
Cc: Ley Foon Tan 
Cc: Mark Salter 
Cc: Martin Schwidefsky 
Cc: Matt Turner 
Cc: Max Filippov 
Cc: Michael Ellerman 
Cc: Michal Simek 
Cc: Mikael Starvik 
Cc: Paul Mackerras 
Cc: Peter Zijlstra 
Cc: Ralf Baechle 
Cc: Rich Felker 
Cc: Richard Henderson 
Cc: Richard Kuo 
Cc: Richard Weinberger 
Cc: Russell King 
Cc: Steven Miao 
Cc: Thomas Gleixner 
Cc: Tony Luck 
Cc: Vineet Gupta 
Cc: Will Deacon 
Cc: Yoshinori Sato 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds