linux-stable.git/arch/mips, branch v6.5.2

mmc: au1xmmc: force non-modular build and remove symbol_get usage

2023-09-06T20:22:22+00:00

commit d4a5c59a955bba96b273ec1a5885bada24c56979 upstream.

au1xmmc is split somewhat awkwardly into the main mmc subsystem driver,
and callbacks in platform_data that sit under arch/mips/ and are
always built in.  The latter than call mmc_detect_change through
symbol_get.  Remove the use of symbol_get by requiring the driver
to be built in.  In the future the interrupt handlers for card
insert/eject detection should probably be moved into the main driver,
and which point it can be built modular again.

Signed-off-by: Christoph Hellwig 
Acked-by: Manuel Lauss 
Reviewed-by: Arnd Bergmann 
[mcgrof: squashed in depends on MMC=y suggested by Arnd]
Signed-off-by: Luis Chamberlain 
Signed-off-by: Greg Kroah-Hartman

locking: remove spin_lock_prefetch

2023-08-12T16:18:47+00:00

The only remaining consumer is new_inode, where it showed up in 2001 as
commit c37fa164f793 ("v2.4.9.9 -> v2.4.9.10") in a historical repo [1]
with a changelog which does not mention it.

Since then the line got only touched up to keep compiling.

While it may have been of benefit back in the day, it is guaranteed to
at best not get in the way in the multicore setting -- as the code
performs *a lot* of work between the prefetch and actual lock acquire,
any contention means the cacheline is already invalid by the time the
routine calls spin_lock().  It adds spurious traffic, for short.

On top of it prefetch is notoriously tricky to use for single-threaded
purposes, making it questionable from the get go.

As such, remove it.

I admit upfront I did not see value in benchmarking this change, but I
can do it if that is deemed appropriate.

Removal from new_inode and of the entire thing are in the same patch as
requested by Linus, so whatever weird looks can be directed at that guy.

Link: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/fs/inode.c?id=c37fa164f793735b32aa3f53154ff1a7659e6442 [1]
Signed-off-by: Mateusz Guzik 
Signed-off-by: Linus Torvalds

arch//configs/defconfig: Replace AUTOFS4_FS by AUTOFS_FS

2023-07-29T21:08:22+00:00

Commit a2225d931f75 ("autofs: remove left-over autofs4 stubs")
promised the removal of the fs/autofs/Kconfig fragment for AUTOFS4_FS
within a couple of releases, but five years later this still has not
happened yet, and AUTOFS4_FS is still enabled in 63 defconfigs.

Get rid of it mechanically:

   git grep -l CONFIG_AUTOFS4_FS -- '*defconfig' |
       xargs sed -i 's/AUTOFS4_FS/AUTOFS_FS/'

Also just remove the AUTOFS4_FS config option stub.  Anybody who hasn't
regenerated their config file in the last five years will need to just
get the new name right when they do.

Signed-off-by: Sven Joachim 
Acked-by: Ian Kent 
Signed-off-by: Linus Torvalds

Merge tag 'mips_6.5_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

2023-07-09T17:02:49+00:00

Pull MIPS fixes from Thomas Bogendoerfer:

 - fixes for KVM

 - fix for loongson build and cpu probing

 - DT fixes

* tag 'mips_6.5_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: kvm: Fix build error with KVM_MIPS_DEBUG_COP0_COUNTERS enabled
  MIPS: dts: add missing space before {
  MIPS: Loongson: Fix build error when make modules_install
  MIPS: KVM: Fix NULL pointer dereference
  MIPS: Loongson: Fix cpu_probe_loongson() again

MIPS: kvm: Fix build error with KVM_MIPS_DEBUG_COP0_COUNTERS enabled

2023-07-07T12:43:01+00:00

Commit e4de20576986 ("MIPS: KVM: Fix NULL pointer dereference") missed
converting one place accessing cop0 registers, which results in a build
error, if KVM_MIPS_DEBUG_COP0_COUNTERS is enabled.

Fixes: e4de20576986 ("MIPS: KVM: Fix NULL pointer dereference")
Signed-off-by: Thomas Bogendoerfer 
Reviewed-by: Philippe Mathieu-Daudé

MIPS: dts: add missing space before {

2023-07-06T11:55:43+00:00

Add missing whitespace between node name/label and opening {.

Signed-off-by: Krzysztof Kozlowski 
Signed-off-by: Thomas Bogendoerfer

Merge tag 'tty-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2023-07-03T20:14:58+00:00

Pull tty/serial driver updates from Greg KH:
 "Here is the big set of tty/serial driver updates for 6.5-rc1.

  Included in here are:

   - tty_audit code cleanups from Jiri

   - more 8250 cleanups from Ilpo

   - samsung_tty driver bugfixes

   - 8250 lock port updates

   - usual fsl_lpuart driver updates and fixes

   - other small serial driver fixes and updates, full details in the
     shortlog

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (58 commits)
  tty_audit: make data of tty_audit_log() const
  tty_audit: make tty pointers in exposed functions const
  tty_audit: make icanon a bool
  tty_audit: invert the condition in tty_audit_log()
  tty_audit: use kzalloc() in tty_audit_buf_alloc()
  tty_audit: use TASK_COMM_LEN for task comm
  Revert "8250: add support for ASIX devices with a FIFO bug"
  serial: atmel: don't enable IRQs prematurely
  tty: serial: Add Nuvoton ma35d1 serial driver support
  tty: serial: fsl_lpuart: add earlycon for imx8ulp platform
  tty: serial: imx: fix rs485 rx after tx
  selftests: tty: add selftest for tty timestamp updates
  tty: tty_io: update timestamps on all device nodes
  tty: fix hang on tty device with no_room set
  serial: core: fix -EPROBE_DEFER handling in init
  serial: 8250_omap: Use force_suspend and resume for system suspend
  tty: serial: samsung_tty: Use abs() to simplify some code
  tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() when iterating clk
  tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() in case of error
  serial: 8250: Apply FSL workarounds also without SERIAL_8250_CONSOLE
  ...

MIPS: Loongson: Fix build error when make modules_install

2023-07-03T14:06:36+00:00

After commit 0e96ea5c3eb5904e5dc2f ("MIPS: Loongson64: Clean up use of
cc-ifversion") we get a build error when make modules_install:

cc1: error: '-mloongson-mmi' must be used with '-mhard-float'

The reason is when make modules_install, 'call cc-option' doesn't work
in $(KBUILD_CFLAGS) of 'CHECKFLAGS'. Then there is no -mno-loongson-mmi
applied and -march=loongson3a enable MMI instructions.

To be detail, the error message comes from the CHECKFLAGS invocation of
$(CC) but it has no impact on the final result of make modules_install,
it is purely a cosmetic issue. The error occurs because cc-option is
defined in scripts/Makefile.compiler, which is not included in Makefile
when running 'make modules_install', as install targets are not supposed
to require the compiler; see commit 805b2e1d427aab4b ("kbuild: include
Makefile.compiler only when compiler is needed"). As a result, the call
to check for '-mno-loongson-mmi' just never happens.

Fix this by partially reverting to the old logic, use 'call cc-option'
to conditionally apply -march=loongson3a and -march=mips64r2.

By the way, Loongson-2E/2F is also broken in commit 13ceb48bc19c563e05f4
("MIPS: Loongson2ef: Remove unnecessary {as,cc}-option calls") so fix it
together.

Fixes: 13ceb48bc19c563e05f4 ("MIPS: Loongson2ef: Remove unnecessary {as,cc}-option calls")
Fixes: 0e96ea5c3eb5904e5dc2 ("MIPS: Loongson64: Clean up use of cc-ifversion")
Cc: stable@vger.kernel.org
Cc: Feiyang Chen 
Cc: Nathan Chancellor 
Cc: Nick Desaulniers 
Signed-off-by: Huacai Chen 
Reviewed-by: Nathan Chancellor 
Signed-off-by: Thomas Bogendoerfer

MIPS: KVM: Fix NULL pointer dereference

2023-07-03T14:06:19+00:00

After commit 45c7e8af4a5e3f0bea4ac209 ("MIPS: Remove KVM_TE support") we
get a NULL pointer dereference when creating a KVM guest:

[  146.243409] Starting KVM with MIPS VZ extensions
[  149.849151] CPU 3 Unable to handle kernel paging request at virtual address 0000000000000300, epc == ffffffffc06356ec, ra == ffffffffc063568c
[  149.849177] Oops[#1]:
[  149.849182] CPU: 3 PID: 2265 Comm: qemu-system-mip Not tainted 6.4.0-rc3+ #1671
[  149.849188] Hardware name: THTF CX TL630 Series/THTF-LS3A4000-7A1000-ML4A, BIOS KL4.1F.TF.D.166.201225.R 12/25/2020
[  149.849192] $ 0   : 0000000000000000 000000007400cce0 0000000000400004 ffffffff8119c740
[  149.849209] $ 4   : 000000007400cce1 000000007400cce1 0000000000000000 0000000000000000
[  149.849221] $ 8   : 000000240058bb36 ffffffff81421ac0 0000000000000000 0000000000400dc0
[  149.849233] $12   : 9800000102a07cc8 ffffffff80e40e38 0000000000000001 0000000000400dc0
[  149.849245] $16   : 0000000000000000 9800000106cd0000 9800000106cd0000 9800000100cce000
[  149.849257] $20   : ffffffffc0632b28 ffffffffc05b31b0 9800000100ccca00 0000000000400000
[  149.849269] $24   : 9800000106cd09ce ffffffff802f69d0
[  149.849281] $28   : 9800000102a04000 9800000102a07cd0 98000001106a8000 ffffffffc063568c
[  149.849293] Hi    : 00000335b2111e66
[  149.849295] Lo    : 6668d90061ae0ae9
[  149.849298] epc   : ffffffffc06356ec kvm_vz_vcpu_setup+0xc4/0x328 [kvm]
[  149.849324] ra    : ffffffffc063568c kvm_vz_vcpu_setup+0x64/0x328 [kvm]
[  149.849336] Status: 7400cce3 KX SX UX KERNEL EXL IE
[  149.849351] Cause : 1000000c (ExcCode 03)
[  149.849354] BadVA : 0000000000000300
[  149.849357] PrId  : 0014c004 (ICT Loongson-3)
[  149.849360] Modules linked in: kvm nfnetlink_queue nfnetlink_log nfnetlink fuse sha256_generic libsha256 cfg80211 rfkill binfmt_misc vfat fat snd_hda_codec_hdmi input_leds led_class snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core snd_pcm snd_timer snd serio_raw xhci_pci radeon drm_suballoc_helper drm_display_helper xhci_hcd ip_tables x_tables
[  149.849432] Process qemu-system-mip (pid: 2265, threadinfo=00000000ae2982d2, task=0000000038e09ad4, tls=000000ffeba16030)
[  149.849439] Stack : 9800000000000003 9800000100ccca00 9800000100ccc000 ffffffffc062cef4
[  149.849453]         9800000102a07d18 c89b63a7ab338e00 0000000000000000 ffffffff811a0000
[  149.849465]         0000000000000000 9800000106cd0000 ffffffff80e59938 98000001106a8920
[  149.849476]         ffffffff80e57f30 ffffffffc062854c ffffffff811a0000 9800000102bf4240
[  149.849488]         ffffffffc05b0000 ffffffff80e3a798 000000ff78000000 000000ff78000010
[  149.849500]         0000000000000255 98000001021f7de0 98000001023f0078 ffffffff81434000
[  149.849511]         0000000000000000 0000000000000000 9800000102ae0000 980000025e92ae28
[  149.849523]         0000000000000000 c89b63a7ab338e00 0000000000000001 ffffffff8119dce0
[  149.849535]         000000ff78000010 ffffffff804f3d3c 9800000102a07eb0 0000000000000255
[  149.849546]         0000000000000000 ffffffff8049460c 000000ff78000010 0000000000000255
[  149.849558]         ...
[  149.849565] Call Trace:
[  149.849567] [] kvm_vz_vcpu_setup+0xc4/0x328 [kvm]
[  149.849586] [] kvm_arch_vcpu_create+0x184/0x228 [kvm]
[  149.849605] [] kvm_vm_ioctl+0x64c/0xf28 [kvm]
[  149.849623] [] sys_ioctl+0xc8/0x118
[  149.849631] [] syscall_common+0x34/0x58

The root cause is the deletion of kvm_mips_commpage_init() leaves vcpu
->arch.cop0 NULL. So fix it by making cop0 from a pointer to an embedded
object.

Fixes: 45c7e8af4a5e3f0bea4ac209 ("MIPS: Remove KVM_TE support")
Cc: stable@vger.kernel.org
Reported-by: Yu Zhao 
Suggested-by: Thomas Bogendoerfer 
Reviewed-by: Philippe Mathieu-Daudé 
Signed-off-by: Huacai Chen 
Signed-off-by: Thomas Bogendoerfer

MIPS: Loongson: Fix cpu_probe_loongson() again

2023-07-03T14:05:51+00:00

Commit 7db5e9e9e5e6c10d7d ("MIPS: loongson64: fix FTLB configuration")
move decode_configs() from the beginning of cpu_probe_loongson() to the
end in order to fix FTLB configuration. However, it breaks the CPUCFG
decoding because decode_configs() use "c->options = xxxx" rather than
"c->options |= xxxx", all information get from CPUCFG by decode_cpucfg()
is lost.

This causes error when creating a KVM guest on Loongson-3A4000:
Exception Code: 4 not handled @ PC: 0000000087ad5981, inst: 0xcb7a1898 BadVaddr: 0x0 Status: 0x0

Fix this by moving the c->cputype setting to the beginning and moving
decode_configs() after that.

Fixes: 7db5e9e9e5e6c10d7d ("MIPS: loongson64: fix FTLB configuration")
Cc: stable@vger.kernel.org
Cc: Huang Pei 
Signed-off-by: Huacai Chen 
Signed-off-by: Thomas Bogendoerfer