linux-stable.git/arch/mips, branch v5.8.4

KVM: Pass MMU notifier range flags to kvm_unmap_hva_range()

2020-08-26T09:49:20+00:00

commit fdfe7cbd58806522e799e2a50a15aee7f2cbb7b6 upstream.

The 'flags' field of 'struct mmu_notifier_range' is used to indicate
whether invalidate_range_{start,end}() are permitted to block. In the
case of kvm_mmu_notifier_invalidate_range_start(), this field is not
forwarded on to the architecture-specific implementation of
kvm_unmap_hva_range() and therefore the backend cannot sensibly decide
whether or not to block.

Add an extra 'flags' parameter to kvm_unmap_hva_range() so that
architectures are aware as to whether or not they are permitted to block.

Cc: 
Cc: Marc Zyngier 
Cc: Suzuki K Poulose 
Cc: James Morse 
Signed-off-by: Will Deacon 
Message-Id: <20200811102725.7121-2-will@kernel.org>
Signed-off-by: Paolo Bonzini 
Signed-off-by: Will Deacon 
Signed-off-by: Greg Kroah-Hartman

MIPS: Fix unable to reserve memory for Crash kernel

2020-08-26T09:49:05+00:00

[ Upstream commit b1ce9716f3b5ed3b49badf1f003b9e34b7ead0f9 ]

Use 0 as the align parameter in memblock_find_in_range() is
incorrect when we reserve memory for Crash kernel.

The environment as follows:
[    0.000000] MIPS: machine is loongson,loongson64c-4core-rs780e
...
[    1.951016]     crashkernel=64M@128M

The warning as follows:
[    0.000000] Invalid memory region reserved for crash kernel

And the iomem as follows:
00200000-0effffff : System RAM
  04000000-0484009f : Kernel code
  048400a0-04ad7fff : Kernel data
  04b40000-05c4c6bf : Kernel bss
1a000000-1bffffff : pci@1a000000
...

The align parameter may be finally used by round_down() or round_up().
Like the following call tree:

mips-next: mm/memblock.c

memblock_find_in_range
└── memblock_find_in_range_node
    ├── __memblock_find_range_bottom_up
    │   └── round_up
    └── __memblock_find_range_top_down
        └── round_down
\#define round_up(x, y) ((((x)-1) | __round_mask(x, y))+1)
\#define round_down(x, y) ((x) & ~__round_mask(x, y))
\#define __round_mask(x, y) ((__typeof__(x))((y)-1))

The round_down(or round_up)'s second parameter must be a power of 2.
If the second parameter is 0, it both will return 0.

Use 1 as the parameter to fix the bug and the iomem as follows:
00200000-0effffff : System RAM
  04000000-0484009f : Kernel code
  048400a0-04ad7fff : Kernel data
  04b40000-05c4c6bf : Kernel bss
  08000000-0bffffff : Crash kernel
1a000000-1bffffff : pci@1a000000
...

Signed-off-by: Jinyang He 
Reviewed-by: Jiaxun Yang 
Signed-off-by: Thomas Bogendoerfer 
Signed-off-by: Sasha Levin

MIPS: SGI-IP27: always enable NUMA in Kconfig

2020-08-21T11:14:57+00:00

commit 6c86a3029ce3b44597526909f2e39a77a497f640 upstream.

When a configuration has NUMA disabled and SGI_IP27 enabled, the build
fails:

  CC      kernel/bounds.s
  CC      arch/mips/kernel/asm-offsets.s
In file included from arch/mips/include/asm/topology.h:11,
                 from include/linux/topology.h:36,
                 from include/linux/gfp.h:9,
                 from include/linux/slab.h:15,
                 from include/linux/crypto.h:19,
                 from include/crypto/hash.h:11,
                 from include/linux/uio.h:10,
                 from include/linux/socket.h:8,
                 from include/linux/compat.h:15,
                 from arch/mips/kernel/asm-offsets.c:12:
include/linux/topology.h: In function 'numa_node_id':
arch/mips/include/asm/mach-ip27/topology.h:16:27: error: implicit declaration of function 'cputonasid'; did you mean 'cpu_vpe_id'? [-Werror=implicit-function-declaration]
 #define cpu_to_node(cpu) (cputonasid(cpu))
                           ^~~~~~~~~~
include/linux/topology.h:119:9: note: in expansion of macro 'cpu_to_node'
  return cpu_to_node(raw_smp_processor_id());
         ^~~~~~~~~~~
include/linux/topology.h: In function 'cpu_cpu_mask':
arch/mips/include/asm/mach-ip27/topology.h:19:7: error: implicit declaration of function 'hub_data' [-Werror=implicit-function-declaration]
      &hub_data(node)->h_cpus)
       ^~~~~~~~
include/linux/topology.h:210:9: note: in expansion of macro 'cpumask_of_node'
  return cpumask_of_node(cpu_to_node(cpu));
         ^~~~~~~~~~~~~~~
arch/mips/include/asm/mach-ip27/topology.h:19:21: error: invalid type argument of '->' (have 'int')
      &hub_data(node)->h_cpus)
                     ^~
include/linux/topology.h:210:9: note: in expansion of macro 'cpumask_of_node'
  return cpumask_of_node(cpu_to_node(cpu));
         ^~~~~~~~~~~~~~~

Before switch from discontigmem to sparsemem, there always was
CONFIG_NEED_MULTIPLE_NODES=y because it was selected by DISCONTIGMEM.
Without DISCONTIGMEM it is possible to have SPARSEMEM without NUMA for
SGI_IP27 and as many things there rely on custom node definition, the
build breaks.

As Thomas noted "... there are right now too many places in IP27 code,
which assumes NUMA enabled", the simplest solution would be to always
enable NUMA for SGI-IP27 builds.

Reported-by: kernel test robot 
Fixes: 397dc00e249e ("mips: sgi-ip27: switch from DISCONTIGMEM to SPARSEMEM")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Rapoport 
Signed-off-by: Thomas Bogendoerfer 
Signed-off-by: Greg Kroah-Hartman

MIPS: qi_lb60: Fix routing to audio amplifier

2020-08-21T11:14:57+00:00

commit 0889a67a9e7a56ba39af223d536630b20b877fda upstream.

The ROUT (right channel output of audio codec) was connected to INL
(left channel of audio amplifier) instead of INR (right channel of audio
amplifier).

Fixes: 8ddebad15e9b ("MIPS: qi_lb60: Migrate to devicetree")
Cc: stable@vger.kernel.org # v5.3
Signed-off-by: Paul Cercueil 
Signed-off-by: Thomas Bogendoerfer 
Signed-off-by: Greg Kroah-Hartman

MIPS: CPU#0 is not hotpluggable

2020-08-21T11:14:57+00:00

commit 9cce844abf07b683cff5f0273977d5f8d0af94c7 upstream.

Now CPU#0 is not hotpluggable on MIPS, so prevent to create /sys/devices
/system/cpu/cpu0/online which confuses some user-space tools.

Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen 
Signed-off-by: Thomas Bogendoerfer 
Signed-off-by: Greg Kroah-Hartman

irqdomain/treewide: Free firmware node after domain removal

2020-08-19T06:27:08+00:00

commit ec0160891e387f4771f953b888b1fe951398e5d9 upstream.

Commit 711419e504eb ("irqdomain: Add the missing assignment of
domain->fwnode for named fwnode") unintentionally caused a dangling pointer
page fault issue on firmware nodes that were freed after IRQ domain
allocation. Commit e3beca48a45b fixed that dangling pointer issue by only
freeing the firmware node after an IRQ domain allocation failure. That fix
no longer frees the firmware node immediately, but leaves the firmware node
allocated after the domain is removed.

The firmware node must be kept around through irq_domain_remove, but should be
freed it afterwards.

Add the missing free operations after domain removal where where appropriate.

Fixes: e3beca48a45b ("irqdomain/treewide: Keep firmware node unconditionally allocated")
Signed-off-by: Jon Derrick 
Signed-off-by: Thomas Gleixner 
Reviewed-by: Andy Shevchenko 
Acked-by: Bjorn Helgaas 	# drivers/pci
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1595363169-7157-1-git-send-email-jonathan.derrick@intel.com
Signed-off-by: Greg Kroah-Hartman

MIPS: VZ: Only include loongson_regs.h for CPU_LOONGSON64

2020-08-19T06:27:05+00:00

commit cf99c505cf7a5b6d3deee91e3571871f20320d31 upstream.

Only Loongson64 platform has and needs loongson_regs.h, including it
unconditionally will cause build errors.

Fixes: 7f2a83f1c2a941ebfee5 ("KVM: MIPS: Add CPUCFG emulation for Loongson-3")
Cc: stable@vger.kernel.org
Reported-by: kernel test robot 
Signed-off-by: Huacai Chen 
Message-Id: <1596891052-24052-1-git-send-email-chenhc@lemote.com>
Signed-off-by: Paolo Bonzini 
Signed-off-by: Greg Kroah-Hartman

MIPS: only register FTLBPar exception handler for supported models

2020-08-19T06:26:51+00:00

[ Upstream commit efd1b4ad3d5178a74387bc5ff69a2d4585f586c6 ]

Previously ExcCode 16 is unconditionally treated as the FTLB parity
exception (FTLBPar), but in fact its semantic is implementation-
dependent. Looking at various manuals it seems the FTLBPar exception is
only present on some recent MIPS Technologies cores, so only register
the handler on these.

Fixes: 75b5b5e0a262790f ("MIPS: Add support for FTLBs")
Reviewed-by: Huacai Chen 
Signed-off-by: WANG Xuerui 
Cc: Paul Burton 
Signed-off-by: Thomas Bogendoerfer 
Signed-off-by: Sasha Levin

MIPS: OCTEON: add missing put_device() call in dwc3_octeon_device_init()

2020-08-19T06:26:43+00:00

[ Upstream commit e8b9fc10f2615b9a525fce56981e40b489528355 ]

if of_find_device_by_node() succeed, dwc3_octeon_device_init() doesn't have
a corresponding put_device(). Thus add put_device() to fix the exception
handling for this function implementation.

Fixes: 93e502b3c2d4 ("MIPS: OCTEON: Platform support for OCTEON III USB controller")
Signed-off-by: Yu Kuai 
Signed-off-by: Thomas Bogendoerfer 
Signed-off-by: Sasha Levin

Merge tag 'irq-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master

2020-07-19T18:53:08+00:00

Pull irq fixes from Thomas Gleixner:
 "Two fixes for the interrupt subsystem:

   - Make the handling of the firmware node consistent and do not free
     the node after the domain has been created successfully. The core
     code stores a pointer to it which can lead to a use after free or
     double free.

     This used to "work" because the pointer was not stored when the
     initial code was written, but at some point later it was required
     to store it. Of course nobody noticed that the existing users break
     that way.

   - Handle affinity setting on inactive interrupts correctly when
     hierarchical irq domains are enabled.

     When interrupts are inactive with the modern hierarchical irqdomain
     design, the interrupt chips are not necessarily in a state where
     affinity changes can be handled. The legacy irq chip design allowed
     this because interrupts are immediately fully initialized at
     allocation time. X86 has a hacky workaround for this, but other
     implementations do not.

     This cased malfunction on GIC-V3. Instead of playing whack a mole
     to find all affected drivers, change the core code to store the
     requested affinity setting and then establish it when the interrupt
     is allocated, which makes the X86 hack go away"

* tag 'irq-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq/affinity: Handle affinity setting on inactive interrupts correctly
  irqdomain/treewide: Keep firmware node unconditionally allocated