linux-stable.git/arch/mips, branch v5.4.92 Linux kernel stable tree MIPS: relocatable: fix possible boot hangup with KASLR enabled 2021-01-19T17:26:12+00:00 Alexander Lobakin alobakin@pm.me 2021-01-10T14:21:05+00:00 f7a97dc302bee9d230b1f8823f0f606a21b9de94 commit 69e976831cd53f9ba304fd20305b2025ecc78eab upstream. LLVM-built Linux triggered a boot hangup with KASLR enabled. arch/mips/kernel/relocate.c:get_random_boot() uses linux_banner, which is a string constant, as a random seed, but accesses it as an array of unsigned long (in rotate_xor()). When the address of linux_banner is not aligned to sizeof(long), such access emits unaligned access exception and hangs the kernel. Use PTR_ALIGN() to align input address to sizeof(long) and also align down the input length to prevent possible access-beyond-end. Fixes: 405bc8fd12f5 ("MIPS: Kernel: Implement KASLR using CONFIG_RELOCATABLE") Cc: stable@vger.kernel.org # 4.7+ Signed-off-by: Alexander Lobakin <alobakin@pm.me> Tested-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 69e976831cd53f9ba304fd20305b2025ecc78eab upstream.

LLVM-built Linux triggered a boot hangup with KASLR enabled.

arch/mips/kernel/relocate.c:get_random_boot() uses linux_banner,
which is a string constant, as a random seed, but accesses it
as an array of unsigned long (in rotate_xor()).
When the address of linux_banner is not aligned to sizeof(long),
such access emits unaligned access exception and hangs the kernel.

Use PTR_ALIGN() to align input address to sizeof(long) and also
align down the input length to prevent possible access-beyond-end.

Fixes: 405bc8fd12f5 ("MIPS: Kernel: Implement KASLR using CONFIG_RELOCATABLE")
Cc: stable@vger.kernel.org # 4.7+
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
MIPS: boot: Fix unaligned access with CONFIG_MIPS_RAW_APPENDED_DTB 2021-01-19T17:26:12+00:00 Paul Cercueil paul@crapouillou.net 2020-12-16T23:39:56+00:00 f5c2f797068358050ce233ee1e611e0006e05412 commit 4d4f9c1a17a3480f8fe523673f7232b254d724b7 upstream. The compressed payload is not necesarily 4-byte aligned, at least when compiling with Clang. In that case, the 4-byte value appended to the compressed payload that corresponds to the uncompressed kernel image size must be read using get_unaligned_le32(). This fixes Clang-built kernels not booting on MIPS (tested on a Ingenic JZ4770 board). Fixes: b8f54f2cde78 ("MIPS: ZBOOT: copy appended dtb to the end of the kernel") Cc: <stable@vger.kernel.org> # v4.7 Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 4d4f9c1a17a3480f8fe523673f7232b254d724b7 upstream.

The compressed payload is not necesarily 4-byte aligned, at least when
compiling with Clang. In that case, the 4-byte value appended to the
compressed payload that corresponds to the uncompressed kernel image
size must be read using get_unaligned_le32().

This fixes Clang-built kernels not booting on MIPS (tested on a Ingenic
JZ4770 board).

Fixes: b8f54f2cde78 ("MIPS: ZBOOT: copy appended dtb to the end of the kernel")
Cc: <stable@vger.kernel.org> # v4.7
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mips: lib: uncached: fix non-standard usage of variable 'sp' 2021-01-19T17:26:12+00:00 Anders Roxell anders.roxell@linaro.org 2020-12-11T10:24:37+00:00 a650107de3744b2bc9d91d71c1e203ba61115b2e commit 5b058973d3205578aa6c9a71392e072a11ca44ef upstream. When building mips tinyconfig with clang the following warning show up: arch/mips/lib/uncached.c:45:6: warning: variable 'sp' is uninitialized when used here [-Wuninitialized] if (sp >= (long)CKSEG0 && sp < (long)CKSEG2) ^~ arch/mips/lib/uncached.c:40:18: note: initialize the variable 'sp' to silence this warning register long sp __asm__("$sp"); ^ = 0 1 warning generated. Rework to make an explicit inline move, instead of the non-standard use of specifying registers for local variables. This is what's written from the gcc-10 manual [1] about specifying registers for local variables: "6.47.5.2 Specifying Registers for Local Variables ................................................. [...] "The only supported use for this feature is to specify registers for input and output operands when calling Extended 'asm' (*note Extended Asm::). [...]". [1] https://docs.w3cub.com/gcc~10/local-register-variables Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Reported-by: Nathan Chancellor <natechancellor@gmail.com> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 5b058973d3205578aa6c9a71392e072a11ca44ef upstream.

When building mips tinyconfig with clang the following warning show up:

arch/mips/lib/uncached.c:45:6: warning: variable 'sp' is uninitialized when used here [-Wuninitialized]
        if (sp >= (long)CKSEG0 && sp < (long)CKSEG2)
            ^~
arch/mips/lib/uncached.c:40:18: note: initialize the variable 'sp' to silence this warning
        register long sp __asm__("$sp");
                        ^
                         = 0
1 warning generated.

Rework to make an explicit inline move, instead of the non-standard use
of specifying registers for local variables. This is what's written
from the gcc-10 manual [1] about specifying registers for local
variables:

"6.47.5.2 Specifying Registers for Local Variables
.................................................
[...]

"The only supported use for this feature is to specify registers for
input and output operands when calling Extended 'asm' (*note Extended
Asm::).  [...]".

[1] https://docs.w3cub.com/gcc~10/local-register-variables
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mips: fix Section mismatch in reference 2021-01-19T17:26:12+00:00 Anders Roxell anders.roxell@linaro.org 2020-11-27T08:39:43+00:00 bda45bbc8e033b1d4ee050b3f7bcb1d5cc3aff23 commit ad4fddef5f2345aa9214e979febe2f47639c10d9 upstream. When building mips tinyconfig with clang the following error show up: WARNING: modpost: vmlinux.o(.text+0x1940c): Section mismatch in reference from the function r4k_cache_init() to the function .init.text:loongson3_sc_init() The function r4k_cache_init() references the function __init loongson3_sc_init(). This is often because r4k_cache_init lacks a __init annotation or the annotation of loongson3_sc_init is wrong. Remove marked __init from function loongson3_sc_init(), mips_sc_probe_cm3(), and mips_sc_probe(). Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ad4fddef5f2345aa9214e979febe2f47639c10d9 upstream.

When building mips tinyconfig with clang the following error show up:

WARNING: modpost: vmlinux.o(.text+0x1940c): Section mismatch in reference from the function r4k_cache_init() to the function .init.text:loongson3_sc_init()
The function r4k_cache_init() references
the function __init loongson3_sc_init().
This is often because r4k_cache_init lacks a __init
annotation or the annotation of loongson3_sc_init is wrong.

Remove marked __init from function loongson3_sc_init(),
mips_sc_probe_cm3(), and mips_sc_probe().

Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
MIPS: Don't round up kernel sections size for memblock_add() 2020-12-30T10:51:18+00:00 Alexander Sverdlin alexander.sverdlin@nokia.com 2020-12-03T12:36:48+00:00 a64822872957e24b617797f62d5218edb313cdce [ Upstream commit d121f125af22a16f0f679293756d28a9691fa46d ] Linux doesn't own the memory immediately after the kernel image. On Octeon bootloader places a shared structure right close after the kernel _end, refer to "struct cvmx_bootinfo *octeon_bootinfo" in cavium-octeon/setup.c. If check_kernel_sections_mem() rounds the PFNs up, first memblock_alloc() inside early_init_dt_alloc_memory_arch() <= device_tree_init() returns memory block overlapping with the above octeon_bootinfo structure, which is being overwritten afterwards. Fixes: a94e4f24ec83 ("MIPS: init: Drop boot_mem_map") Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit d121f125af22a16f0f679293756d28a9691fa46d ]

Linux doesn't own the memory immediately after the kernel image. On Octeon
bootloader places a shared structure right close after the kernel _end,
refer to "struct cvmx_bootinfo *octeon_bootinfo" in cavium-octeon/setup.c.

If check_kernel_sections_mem() rounds the PFNs up, first memblock_alloc()
inside early_init_dt_alloc_memory_arch() <= device_tree_init() returns
memory block overlapping with the above octeon_bootinfo structure, which
is being overwritten afterwards.

Fixes: a94e4f24ec83 ("MIPS: init: Drop boot_mem_map")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
MIPS: BCM47XX: fix kconfig dependency bug for BCM47XX_BCMA 2020-12-30T10:51:07+00:00 Necip Fazil Yildiran fazilyildiran@gmail.com 2020-11-02T21:34:01+00:00 38017f2c06cfcc1509a1ab200affb86c4ff0cf42 [ Upstream commit 3a5fe2fb9635c43359c9729352f45044f3c8df6b ] When BCM47XX_BCMA is enabled and BCMA_DRIVER_PCI is disabled, it results in the following Kbuild warning: WARNING: unmet direct dependencies detected for BCMA_DRIVER_PCI_HOSTMODE Depends on [n]: MIPS [=y] && BCMA_DRIVER_PCI [=n] && PCI_DRIVERS_LEGACY [=y] && BCMA [=y]=y Selected by [y]: - BCM47XX_BCMA [=y] && BCM47XX [=y] && PCI [=y] The reason is that BCM47XX_BCMA selects BCMA_DRIVER_PCI_HOSTMODE without depending on or selecting BCMA_DRIVER_PCI while BCMA_DRIVER_PCI_HOSTMODE depends on BCMA_DRIVER_PCI. This can also fail building the kernel. Honor the kconfig dependency to remove unmet direct dependency warnings and avoid any potential build failures. Fixes: c1d1c5d4213e ("bcm47xx: add support for bcma bus") Link: https://bugzilla.kernel.org/show_bug.cgi?id=209879 Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 3a5fe2fb9635c43359c9729352f45044f3c8df6b ]

When BCM47XX_BCMA is enabled and BCMA_DRIVER_PCI is disabled, it results
in the following Kbuild warning:

WARNING: unmet direct dependencies detected for BCMA_DRIVER_PCI_HOSTMODE
  Depends on [n]: MIPS [=y] && BCMA_DRIVER_PCI [=n] && PCI_DRIVERS_LEGACY [=y] && BCMA [=y]=y
  Selected by [y]:
  - BCM47XX_BCMA [=y] && BCM47XX [=y] && PCI [=y]

The reason is that BCM47XX_BCMA selects BCMA_DRIVER_PCI_HOSTMODE without
depending on or selecting BCMA_DRIVER_PCI while BCMA_DRIVER_PCI_HOSTMODE
depends on BCMA_DRIVER_PCI. This can also fail building the kernel.

Honor the kconfig dependency to remove unmet direct dependency warnings
and avoid any potential build failures.

Fixes: c1d1c5d4213e ("bcm47xx: add support for bcma bus")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=209879
Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
arch: pgtable: define MAX_POSSIBLE_PHYSMEM_BITS where needed 2020-12-02T07:49:50+00:00 Arnd Bergmann arnd@arndb.de 2020-11-11T16:52:58+00:00 1bef5f25a69234613b92a0e2456870fee4a57efc [ Upstream commit cef397038167ac15d085914493d6c86385773709 ] Stefan Agner reported a bug when using zsram on 32-bit Arm machines with RAM above the 4GB address boundary: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = a27bd01c [00000000] *pgd=236a0003, *pmd=1ffa64003 Internal error: Oops: 207 [#1] SMP ARM Modules linked in: mdio_bcm_unimac(+) brcmfmac cfg80211 brcmutil raspberrypi_hwmon hci_uart crc32_arm_ce bcm2711_thermal phy_generic genet CPU: 0 PID: 123 Comm: mkfs.ext4 Not tainted 5.9.6 #1 Hardware name: BCM2711 PC is at zs_map_object+0x94/0x338 LR is at zram_bvec_rw.constprop.0+0x330/0xa64 pc : [<c0602b38>] lr : [<c0bda6a0>] psr: 60000013 sp : e376bbe0 ip : 00000000 fp : c1e2921c r10: 00000002 r9 : c1dda730 r8 : 00000000 r7 : e8ff7a00 r6 : 00000000 r5 : 02f9ffa0 r4 : e3710000 r3 : 000fdffe r2 : c1e0ce80 r1 : ebf979a0 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 30c5383d Table: 235c2a80 DAC: fffffffd Process mkfs.ext4 (pid: 123, stack limit = 0x495a22e6) Stack: (0xe376bbe0 to 0xe376c000) As it turns out, zsram needs to know the maximum memory size, which is defined in MAX_PHYSMEM_BITS when CONFIG_SPARSEMEM is set, or in MAX_POSSIBLE_PHYSMEM_BITS on the x86 architecture. The same problem will be hit on all 32-bit architectures that have a physical address space larger than 4GB and happen to not enable sparsemem and include asm/sparsemem.h from asm/pgtable.h. After the initial discussion, I suggested just always defining MAX_POSSIBLE_PHYSMEM_BITS whenever CONFIG_PHYS_ADDR_T_64BIT is set, or provoking a build error otherwise. This addresses all configurations that can currently have this runtime bug, but leaves all other configurations unchanged. I looked up the possible number of bits in source code and datasheets, here is what I found: - on ARC, CONFIG_ARC_HAS_PAE40 controls whether 32 or 40 bits are used - on ARM, CONFIG_LPAE enables 40 bit addressing, without it we never support more than 32 bits, even though supersections in theory allow up to 40 bits as well. - on MIPS, some MIPS32r1 or later chips support 36 bits, and MIPS32r5 XPA supports up to 60 bits in theory, but 40 bits are more than anyone will ever ship - On PowerPC, there are three different implementations of 36 bit addressing, but 32-bit is used without CONFIG_PTE_64BIT - On RISC-V, the normal page table format can support 34 bit addressing. There is no highmem support on RISC-V, so anything above 2GB is unused, but it might be useful to eventually support CONFIG_ZRAM for high pages. Fixes: 61989a80fb3a ("staging: zsmalloc: zsmalloc memory allocation library") Fixes: 02390b87a945 ("mm/zsmalloc: Prepare to variable MAX_PHYSMEM_BITS") Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Reviewed-by: Stefan Agner <stefan@agner.ch> Tested-by: Stefan Agner <stefan@agner.ch> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Link: https://lore.kernel.org/linux-mm/bdfa44bf1c570b05d6c70898e2bbb0acf234ecdf.1604762181.git.stefan@agner.ch/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit cef397038167ac15d085914493d6c86385773709 ]

Stefan Agner reported a bug when using zsram on 32-bit Arm machines
with RAM above the 4GB address boundary:

  Unable to handle kernel NULL pointer dereference at virtual address 00000000
  pgd = a27bd01c
  [00000000] *pgd=236a0003, *pmd=1ffa64003
  Internal error: Oops: 207 [#1] SMP ARM
  Modules linked in: mdio_bcm_unimac(+) brcmfmac cfg80211 brcmutil raspberrypi_hwmon hci_uart crc32_arm_ce bcm2711_thermal phy_generic genet
  CPU: 0 PID: 123 Comm: mkfs.ext4 Not tainted 5.9.6 #1
  Hardware name: BCM2711
  PC is at zs_map_object+0x94/0x338
  LR is at zram_bvec_rw.constprop.0+0x330/0xa64
  pc : [<c0602b38>]    lr : [<c0bda6a0>]    psr: 60000013
  sp : e376bbe0  ip : 00000000  fp : c1e2921c
  r10: 00000002  r9 : c1dda730  r8 : 00000000
  r7 : e8ff7a00  r6 : 00000000  r5 : 02f9ffa0  r4 : e3710000
  r3 : 000fdffe  r2 : c1e0ce80  r1 : ebf979a0  r0 : 00000000
  Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
  Control: 30c5383d  Table: 235c2a80  DAC: fffffffd
  Process mkfs.ext4 (pid: 123, stack limit = 0x495a22e6)
  Stack: (0xe376bbe0 to 0xe376c000)

As it turns out, zsram needs to know the maximum memory size, which
is defined in MAX_PHYSMEM_BITS when CONFIG_SPARSEMEM is set, or in
MAX_POSSIBLE_PHYSMEM_BITS on the x86 architecture.

The same problem will be hit on all 32-bit architectures that have a
physical address space larger than 4GB and happen to not enable sparsemem
and include asm/sparsemem.h from asm/pgtable.h.

After the initial discussion, I suggested just always defining
MAX_POSSIBLE_PHYSMEM_BITS whenever CONFIG_PHYS_ADDR_T_64BIT is
set, or provoking a build error otherwise. This addresses all
configurations that can currently have this runtime bug, but
leaves all other configurations unchanged.

I looked up the possible number of bits in source code and
datasheets, here is what I found:

 - on ARC, CONFIG_ARC_HAS_PAE40 controls whether 32 or 40 bits are used
 - on ARM, CONFIG_LPAE enables 40 bit addressing, without it we never
   support more than 32 bits, even though supersections in theory allow
   up to 40 bits as well.
 - on MIPS, some MIPS32r1 or later chips support 36 bits, and MIPS32r5
   XPA supports up to 60 bits in theory, but 40 bits are more than
   anyone will ever ship
 - On PowerPC, there are three different implementations of 36 bit
   addressing, but 32-bit is used without CONFIG_PTE_64BIT
 - On RISC-V, the normal page table format can support 34 bit
   addressing. There is no highmem support on RISC-V, so anything
   above 2GB is unused, but it might be useful to eventually support
   CONFIG_ZRAM for high pages.

Fixes: 61989a80fb3a ("staging: zsmalloc: zsmalloc memory allocation library")
Fixes: 02390b87a945 ("mm/zsmalloc: Prepare to variable MAX_PHYSMEM_BITS")
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Tested-by: Stefan Agner <stefan@agner.ch>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/linux-mm/bdfa44bf1c570b05d6c70898e2bbb0acf234ecdf.1604762181.git.stefan@agner.ch/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
MIPS: Alchemy: Fix memleak in alchemy_clk_setup_cpu 2020-11-24T12:29:07+00:00 Zhang Qilong zhangqilong3@huawei.com 2020-11-13T13:18:56+00:00 5e7f422c38109c0a3ba213db3164e7c23ccf50be [ Upstream commit ac3b57adf87ad9bac7e33ca26bbbb13fae1ed62b ] If the clk_register fails, we should free h before function returns to prevent memleak. Fixes: 474402291a0ad ("MIPS: Alchemy: clock framework integration of onchip clocks") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit ac3b57adf87ad9bac7e33ca26bbbb13fae1ed62b ]

If the clk_register fails, we should free h before
function returns to prevent memleak.

Fixes: 474402291a0ad ("MIPS: Alchemy: clock framework integration of onchip clocks")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
MIPS: export has_transparent_hugepage() for modules 2020-11-24T12:29:04+00:00 Randy Dunlap rdunlap@infradead.org 2020-10-23T19:44:40+00:00 cab227c19cd11b19f43f0b20a71f37f56c70cf4b [ Upstream commit 31b4d8e172f614adc53ddecb4b6b2f6411a49b84 ] MIPS should export its local version of "has_transparent_hugepage" so that loadable modules (dax) can use it. Fixes this build error: ERROR: modpost: "has_transparent_hugepage" [drivers/dax/dax.ko] undefined! Fixes: fd8cfd300019 ("arch: fix has_transparent_hugepage()") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: linux-mips@vger.kernel.org Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: linux-nvdimm@lists.01.org Cc: Hugh Dickins <hughd@google.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 31b4d8e172f614adc53ddecb4b6b2f6411a49b84 ]

MIPS should export its local version of "has_transparent_hugepage"
so that loadable modules (dax) can use it.

Fixes this build error:
ERROR: modpost: "has_transparent_hugepage" [drivers/dax/dax.ko] undefined!

Fixes: fd8cfd300019 ("arch: fix has_transparent_hugepage()")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: linux-nvdimm@lists.01.org
Cc: Hugh Dickins <hughd@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
MIPS: PCI: Fix MIPS build 2020-11-22T09:14:11+00:00 Sudip Mukherjee sudipm.mukherjee@gmail.com 2020-11-19T10:26:33+00:00 b33905dc1ce55e5af610ba83d122a5b1da22c0b9 While backporting 37640adbefd6 ("MIPS: PCI: remember nasid changed by set interrupt affinity") something went wrong and an extra 'n' was added. So 'data->nasid' became 'data->nnasid' and the MIPS builds started failing. This is only needed for 5.4-stable tree. Fixes: 957978aa56f1 ("MIPS: PCI: remember nasid changed by set interrupt affinity") Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
While backporting 37640adbefd6 ("MIPS: PCI: remember nasid changed by
set interrupt affinity") something went wrong and an extra 'n' was added.
So 'data->nasid' became 'data->nnasid' and the MIPS builds started failing.

This is only needed for 5.4-stable tree.

Fixes: 957978aa56f1 ("MIPS: PCI: remember nasid changed by set interrupt affinity")
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>