linux-stable.git/arch/mips, branch v5.4.58

irqdomain/treewide: Keep firmware node unconditionally allocated

2020-07-29T08:18:28+00:00

[ Upstream commit e3beca48a45b5e0e6e6a4e0124276b8248dcc9bb ]

Quite some non OF/ACPI users of irqdomains allocate firmware nodes of type
IRQCHIP_FWNODE_NAMED or IRQCHIP_FWNODE_NAMED_ID and free them right after
creating the irqdomain. The only purpose of these FW nodes is to convey
name information. When this was introduced the core code did not store the
pointer to the node in the irqdomain. A recent change stored the firmware
node pointer in irqdomain for other reasons and missed to notice that the
usage sites which do the alloc_fwnode/create_domain/free_fwnode sequence
are broken by this. Storing a dangling pointer is dangerous itself, but in
case that the domain is destroyed later on this leads to a double free.

Remove the freeing of the firmware node after creating the irqdomain from
all affected call sites to cure this.

Fixes: 711419e504eb ("irqdomain: Add the missing assignment of domain->fwnode for named fwnode")
Reported-by: Andy Shevchenko 
Signed-off-by: Thomas Gleixner 
Acked-by: Bjorn Helgaas 
Acked-by: Marc Zyngier 
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/873661qakd.fsf@nanos.tec.linutronix.de
Signed-off-by: Sasha Levin

scsi: sr: remove references to BLK_DEV_SR_VENDOR, leave it enabled

2020-07-22T07:32:57+00:00

[ Upstream commit 679b2ec8e060ca7a90441aff5e7d384720a41b76 ]

This kernel configuration is basically enabling/disabling sr driver quirks
detection. While these quirks are for fairly rare devices (very old CD
burners, and a glucometer), the additional detection of these models is a
very minimal amount of code.

The logic behind the quirks is always built into the sr driver.

This also removes the config from all the defconfig files that are enabling
this already.

Link: https://lore.kernel.org/r/20200223191144.726-1-flameeyes@flameeyes.com
Reviewed-by: Jens Axboe 
Signed-off-by: Diego Elio Pettenò 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

MIPS: Add missing EHB in mtc0 -> mfc0 sequence for DSPen

2020-07-09T07:37:56+00:00

commit fcec538ef8cca0ad0b84432235dccd9059c8e6f8 upstream.

This resolves the hazard between the mtc0 in the change_c0_status() and
the mfc0 in configure_exception_vector(). Without resolving this hazard
configure_exception_vector() could read an old value and would restore
this old value again. This would revert the changes change_c0_status()
did. I checked this by printing out the read_c0_status() at the end of
per_cpu_trap_init() and the ST0_MX is not set without this patch.

The hazard is documented in the MIPS Architecture Reference Manual Vol.
III: MIPS32/microMIPS32 Privileged Resource Architecture (MD00088), rev
6.03 table 8.1 which includes:

   Producer | Consumer | Hazard
  ----------|----------|----------------------------
   mtc0     | mfc0     | any coprocessor 0 register

I saw this hazard on an Atheros AR9344 rev 2 SoC with a MIPS 74Kc CPU.
There the change_c0_status() function would activate the DSPen by
setting ST0_MX in the c0_status register. This was reverted and then the
system got a DSP exception when the DSP registers were saved in
save_dsp() in the first process switch. The crash looks like this:

[    0.089999] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.097796] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.107070] Kernel panic - not syncing: Unexpected DSP exception
[    0.113470] Rebooting in 1 seconds..

We saw this problem in OpenWrt only on the MIPS 74Kc based Atheros SoCs,
not on the 24Kc based SoCs. We only saw it with kernel 5.4 not with
kernel 4.19, in addition we had to use GCC 8.4 or 9.X, with GCC 8.3 it
did not happen.

In the kernel I bisected this problem to commit 9012d011660e ("compiler:
allow all arches to enable CONFIG_OPTIMIZE_INLINING"), but when this was
reverted it also happened after commit 172dcd935c34b ("MIPS: Always
allocate exception vector for MIPSr2+").

Commit 0b24cae4d535 ("MIPS: Add missing EHB in mtc0 -> mfc0 sequence.")
does similar changes to a different file. I am not sure if there are
more places affected by this problem.

Signed-off-by: Hauke Mehrtens 
Cc: 
Signed-off-by: Thomas Bogendoerfer 
Signed-off-by: Greg Kroah-Hartman

MIPS: lantiq: xway: sysctrl: fix the GPHY clock alias names

2020-07-09T07:37:56+00:00

commit 03e62fd67d3ab33f39573fc8787d89dc9b4d7255 upstream.

The dt-bindings for the GSWIP describe that the node should be named
"switch". Use the same name in sysctrl.c so the GSWIP driver can
actually find the "gphy0" and "gphy1" clocks.

Fixes: 14fceff4771e51 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
Cc: stable@vger.kernel.org
Signed-off-by: Martin Blumenstingl 
Acked-by: Hauke Mehrtens 
Signed-off-by: Thomas Bogendoerfer 
Signed-off-by: Greg Kroah-Hartman

MIPS: Fix IRQ tracing when call handle_fpe() and handle_msa_fpe()

2020-06-22T07:31:09+00:00

[ Upstream commit 31e1b3efa802f97a17628dde280006c4cee4ce5e ]

Register "a1" is unsaved in this function,
 when CONFIG_TRACE_IRQFLAGS is enabled,
 the TRACE_IRQS_OFF macro will call trace_hardirqs_off(),
 and this may change register "a1".
 The changed register "a1" as argument will be send
 to do_fpe() and do_msa_fpe().

Signed-off-by: YuanJunQing 
Signed-off-by: Thomas Bogendoerfer 
Signed-off-by: Sasha Levin

MIPS: tools: Fix resource leak in elf-entry.c

2020-06-22T07:31:08+00:00

[ Upstream commit f33a0b941017b9cb5a4e975af198b855b2f2b455 ]

There is a file descriptor resource leak in elf-entry.c, fix this
by adding fclose() before return and die.

Signed-off-by: Kaige Li 
Signed-off-by: Thomas Bogendoerfer 
Signed-off-by: Sasha Levin

mips: Add udelay lpj numbers adjustment

2020-06-22T07:31:07+00:00

[ Upstream commit ed26aacfb5f71eecb20a51c4467da440cb719d66 ]

Loops-per-jiffies is a special number which represents a number of
noop-loop cycles per CPU-scheduler quantum - jiffies. As you
understand aside from CPU-specific implementation it depends on
the CPU frequency. So when a platform has the CPU frequency fixed,
we have no problem and the current udelay interface will work
just fine. But as soon as CPU-freq driver is enabled and the cores
frequency changes, we'll end up with distorted udelay's. In order
to fix this we have to accordinly adjust the per-CPU udelay_val
(the same as the global loops_per_jiffy) number. This can be done
in the CPU-freq transition event handler. We subscribe to that event
in the MIPS arch time-inititalization method.

Co-developed-by: Alexey Malahov 
Signed-off-by: Alexey Malahov 
Signed-off-by: Serge Semin 
Reviewed-by: Jiaxun Yang 
Cc: Thomas Bogendoerfer 
Cc: Paul Burton 
Cc: Ralf Baechle 
Cc: Arnd Bergmann 
Cc: Rob Herring 
Cc: devicetree@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer 
Signed-off-by: Sasha Levin

mips: MAAR: Use more precise address mask

2020-06-22T07:31:07+00:00

[ Upstream commit bbb5946eb545fab8ad8f46bce8a803e1c0c39d47 ]

Indeed according to the MIPS32 Privileged Resource Architecgture the MAAR
pair register address field either takes [12:31] bits for non-XPA systems
and [12:55] otherwise. In any case the current address mask is just
wrong for 64-bit and 32-bits XPA chips. So lets extend it to 59-bits
of physical address value. This shall cover the 64-bits architecture and
systems with XPA enabled, and won't cause any problem for non-XPA 32-bit
systems, since address values exceeding the architecture specific MAAR
mask will be just truncated with setting zeros in the unsupported upper
bits.

Co-developed-by: Alexey Malahov 
Signed-off-by: Alexey Malahov 
Signed-off-by: Serge Semin 
Cc: Thomas Bogendoerfer 
Cc: Paul Burton 
Cc: Ralf Baechle 
Cc: Arnd Bergmann 
Cc: Rob Herring 
Cc: devicetree@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer 
Signed-off-by: Sasha Levin

mips: cm: Fix an invalid error code of INTVN_*_ERR

2020-06-22T07:31:03+00:00

[ Upstream commit 8a0efb8b101665a843205eab3d67ab09cb2d9a8d ]

Commit 3885c2b463f6 ("MIPS: CM: Add support for reporting CM cache
errors") adds cm2_causes[] array with map of error type ID and
pointers to the short description string. There is a mistake in
the table, since according to MIPS32 manual CM2_ERROR_TYPE = {17,18}
correspond to INTVN_WR_ERR and INTVN_RD_ERR, while the table
claims they have {0x17,0x18} codes. This is obviously hex-dec
copy-paste bug. Moreover codes {0x18 - 0x1a} indicate L2 ECC errors.

Fixes: 3885c2b463f6 ("MIPS: CM: Add support for reporting CM cache errors")
Signed-off-by: Serge Semin 
Cc: Alexey Malahov 
Cc: Thomas Bogendoerfer 
Cc: Paul Burton 
Cc: Ralf Baechle 
Cc: Arnd Bergmann 
Cc: Rob Herring 
Cc: linux-pm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer 
Signed-off-by: Sasha Levin

MIPS: Truncate link address into 32bit for 32bit kernel

2020-06-22T07:31:03+00:00

[ Upstream commit ff487d41036035376e47972c7c522490b839ab37 ]

LLD failed to link vmlinux with 64bit load address for 32bit ELF
while bfd will strip 64bit address into 32bit silently.
To fix LLD build, we should truncate load address provided by platform
into 32bit for 32bit kernel.

Signed-off-by: Jiaxun Yang 
Link: https://github.com/ClangBuiltLinux/linux/issues/786
Link: https://sourceware.org/bugzilla/show_bug.cgi?id=25784
Reviewed-by: Fangrui Song 
Reviewed-by: Kees Cook 
Tested-by: Nathan Chancellor 
Cc: Maciej W. Rozycki 
Tested-by: Nick Desaulniers 
Signed-off-by: Thomas Bogendoerfer 
Signed-off-by: Sasha Levin