linux-stable.git/arch/mips, branch v4.4.99

MIPS: AR7: Ensure that serial ports are properly set up

2017-11-15T16:13:13+00:00

commit b084116f8587b222a2c5ef6dcd846f40f24b9420 upstream.

Without UPF_FIXED_TYPE, the data from the PORT_AR7 uart_config entry is
never copied, resulting in a dead port.

Fixes: 154615d55459 ("MIPS: AR7: Use correct UART port type")
Signed-off-by: Oswald Buddenhagen 
[jonas.gorski: add Fixes tag]
Signed-off-by: Jonas Gorski 
Reviewed-by: Florian Fainelli 
Cc: Ralf Baechle 
Cc: Greg Kroah-Hartman 
Cc: Yoshihiro YUNOMAE 
Cc: Nicolas Schichan 
Cc: Oswald Buddenhagen 
Cc: linux-mips@linux-mips.org
Cc: linux-serial@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17543/
Signed-off-by: James Hogan 
Signed-off-by: Greg Kroah-Hartman

MIPS: AR7: Defer registration of GPIO

2017-11-15T16:13:13+00:00

commit e6b03ab63b4d270e0249f96536fde632409dc1dc upstream.

When called from prom init code, ar7_gpio_init() will fail as it will
call gpiochip_add() which relies on a working kmalloc() to alloc
the gpio_desc array and kmalloc is not useable yet at prom init time.

Move ar7_gpio_init() to ar7_register_devices() (a device_initcall)
where kmalloc works.

Fixes: 14e85c0e69d5 ("gpio: remove gpio_descs global array")
Signed-off-by: Jonas Gorski 
Reviewed-by: Florian Fainelli 
Cc: Ralf Baechle 
Cc: Greg Kroah-Hartman 
Cc: Yoshihiro YUNOMAE 
Cc: Nicolas Schichan 
Cc: linux-mips@linux-mips.org
Cc: linux-serial@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17542/
Signed-off-by: James Hogan 
Signed-off-by: Greg Kroah-Hartman

MIPS: SMP: Fix deadlock & online race

2017-11-15T16:13:12+00:00

commit 9e8c399a88f0b87e41a894911475ed2a8f8dff9e upstream.

Commit 6f542ebeaee0 ("MIPS: Fix race on setting and getting
cpu_online_mask") effectively reverted commit 8f46cca1e6c06 ("MIPS: SMP:
Fix possibility of deadlock when bringing CPUs online") and thus has
reinstated the possibility of deadlock.

The commit was based on testing of kernel v4.4, where the CPU hotplug
core code issued a BUG() if the starting CPU is not marked online when
the boot CPU returns from __cpu_up. The commit fixes this race (in
v4.4), but re-introduces the deadlock situation.

As noted in the commit message, upstream differs in this area. Commit
8df3e07e7f21f ("cpu/hotplug: Let upcoming cpu bring itself fully up")
adds a completion event in the CPU hotplug core code, making this race
impossible. However, people were unhappy with relying on the core code
to do the right thing.

To address the issues both commits were trying to fix, add a second
completion event in the MIPS smp hotplug path. It removes the
possibility of a race, since the MIPS smp hotplug code now synchronises
both the boot and secondary CPUs before they return to the hotplug core
code. It also addresses the deadlock by ensuring that the secondary CPU
is not marked online before it's counters are synchronised.

This fix should also be backported to fix the race condition introduced
by the backport of commit 8f46cca1e6c06 ("MIPS: SMP: Fix possibility of
deadlock when bringing CPUs online"), through really that race only
existed before commit 8df3e07e7f21f ("cpu/hotplug: Let upcoming cpu
bring itself fully up").

Signed-off-by: Matt Redfearn 
Fixes: 6f542ebeaee0 ("MIPS: Fix race on setting and getting cpu_online_mask")
CC: Matija Glavinic Pecotic 
Patchwork: https://patchwork.linux-mips.org/patch/17376/
Signed-off-by: James Hogan 
[jhogan@kernel.org: Backported 4.1..4.9]
Signed-off-by: Greg Kroah-Hartman

MIPS: Fix race on setting and getting cpu_online_mask

2017-11-15T16:13:12+00:00

commit 6f542ebeaee0ee552a902ce3892220fc22c7ec8e upstream.

While testing cpu hoptlug (cpu down and up in loops) on kernel 4.4, it was
observed that occasionally check for cpu online will fail in kernel/cpu.c,
_cpu_up:

https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/tree/kernel/cpu.c?h=v4.4.79#n485
 518        /* Arch-specific enabling code. */
 519        ret = __cpu_up(cpu, idle);
 520
 521        if (ret != 0)
 522                goto out_notify;
 523        BUG_ON(!cpu_online(cpu));

Reason is race between start_secondary and _cpu_up. cpu_callin_map is set
before cpu_online_mask. In __cpu_up, cpu_callin_map is waited for, but cpu
online mask is not, resulting in race in which secondary processor started
and set cpu_callin_map, but not yet set the online mask,resulting in above
BUG being hit.

Upstream differs in the area. cpu_online check is in bringup_wait_for_ap,
which is after cpu reached AP_ONLINE_IDLE,where secondary passed its start
function. Nonetheless, fix makes start_secondary safe and not depending on
other locks throughout the code. It protects as well against cpu_online
checks put in between sometimes in the future.

Fix this by moving completion after all flags are set.

Signed-off-by: Matija Glavinic Pecotic 
Cc: Alexander Sverdlin 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16925/
Signed-off-by: Ralf Baechle 
Signed-off-by: Greg Kroah-Hartman

MIPS: SMP: Use a completion event to signal CPU up

2017-11-15T16:13:12+00:00

commit a00eeede507c975087b7b8df8cf2c9f88ba285de upstream.

If a secondary CPU failed to start, for any reason, the CPU requesting
the secondary to start would get stuck in the loop waiting for the
secondary to be present in the cpu_callin_map.

Rather than that, use a completion event to signal that the secondary
CPU has started and is waiting to synchronise counters.

Since the CPU presence will no longer be marked in cpu_callin_map,
remove the redundant test from arch_cpu_idle_dead().

Signed-off-by: Matt Redfearn 
Cc: Maciej W. Rozycki 
Cc: Jiri Slaby 
Cc: Paul Gortmaker 
Cc: Chris Metcalf 
Cc: Thomas Gleixner 
Cc: Qais Yousef 
Cc: James Hogan 
Cc: Paul Burton 
Cc: Marcin Nowakowski 
Cc: Andrew Morton 
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14502/
Signed-off-by: Ralf Baechle 
Signed-off-by: Greg Kroah-Hartman

MIPS: Fix CM region target definitions

2017-11-15T16:13:12+00:00

commit 6a6cba1d945a7511cdfaf338526871195e420762 upstream.

The default CM target field in the GCR_BASE register is encoded with 0
meaning memory & 1 being reserved. However the definitions we use for
those bits effectively get these two values backwards - likely because
they were copied from the definitions for the CM regions where the
target is encoded differently. This results in use setting up GCR_BASE
with the reserved target value by default, rather than targeting memory
as intended. Although we currently seem to get away with this it's not a
great idea to rely upon.

Fix this by changing our macros to match the documentated target values.

The incorrect encoding became used as of commit 9f98f3dd0c51 ("MIPS: Add
generic CM probe & access code") in the Linux v3.15 cycle, and was
likely carried forwards from older but unused code introduced by
commit 39b8d5254246 ("[MIPS] Add support for MIPS CMP platform.") in the
v2.6.26 cycle.

Fixes: 9f98f3dd0c51 ("MIPS: Add generic CM probe & access code")
Signed-off-by: Paul Burton 
Reported-by: Matt Redfearn 
Reviewed-by: James Hogan 
Cc: Matt Redfearn 
Cc: Ralf Baechle 
Cc: linux-mips@linux-mips.org
Cc:  # v3.15+
Patchwork: https://patchwork.linux-mips.org/patch/17562/
Signed-off-by: James Hogan 
[jhogan@kernel.org: Backported 3.15..4.13]
Signed-off-by: Greg Kroah-Hartman

MIPS: microMIPS: Fix incorrect mask in insn_table_MM

2017-11-15T16:13:12+00:00

commit 77238e76b9156d28d86c1e31c00ed2960df0e4de upstream.

It seems that this is a typo error and the proper bit masking is
"RT | RS" instead of "RS | RS".

This issue was detected with the help of Coccinelle.

Fixes: d6b3314b49e1 ("MIPS: uasm: Add lh uam instruction")
Reported-by: Julia Lawall 
Signed-off-by: Gustavo A. R. Silva 
Reviewed-by: James Hogan 
Patchwork: https://patchwork.linux-mips.org/patch/17551/
Signed-off-by: James Hogan 
[jhogan@kernel.org: Backported 3.16..4.12]
Signed-off-by: Greg Kroah-Hartman

MIPS: Fix minimum alignment requirement of IRQ stack

2017-10-21T15:09:01+00:00

commit 5fdc66e046206306bf61ff2d626bfa52ca087f7b upstream.

Commit db8466c581cc ("MIPS: IRQ Stack: Unwind IRQ stack onto task
stack") erroneously set the initial stack pointer of the IRQ stack to a
value with a 4 byte alignment. The MIPS32 ABI requires that the minimum
stack alignment is 8 byte, and the MIPS64 ABIs(n32/n64) require 16 byte
minimum alignment. Fix IRQ_STACK_START such that it leaves space for the
dummy stack frame (containing interrupted task kernel stack pointer)
while also meeting minimum alignment requirements.

Fixes: db8466c581cc ("MIPS: IRQ Stack: Unwind IRQ stack onto task stack")
Reported-by: Darius Ivanauskas 
Signed-off-by: Matt Redfearn 
Cc: Chris Metcalf 
Cc: Petr Mladek 
Cc: Aaron Tomlin 
Cc: Jason A. Donenfeld 
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16760/
Signed-off-by: Ralf Baechle 
Signed-off-by: Greg Kroah-Hartman

MIPS: math-emu: Remove pr_err() calls from fpu_emu()

2017-10-18T07:20:41+00:00

commit ca8eb05b5f332a9e1ab3e2ece498d49f4d683470 upstream.

The FPU emulator includes 2 calls to pr_err() which are triggered by
invalid instruction encodings for MIPSr6 cmp.cond.fmt instructions.
These cases are not kernel errors, merely invalid instructions which are
already handled by delivering a SIGILL which will provide notification
that something failed in cases where that makes sense.

In cases where that SIGILL is somewhat expected & being handled, for
example when crashme happens to generate one of the affected bad
encodings, the message is printed with no useful context about what
triggered it & spams the kernel log for no good reason.

Remove the pr_err() calls to make crashme run silently & treat the bad
encodings the same way we do others, with a SIGILL & no further kernel
log output.

Signed-off-by: Paul Burton 
Fixes: f8c3c6717a71 ("MIPS: math-emu: Add support for the CMP.condn.fmt R6 instruction")
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17253/
Signed-off-by: Ralf Baechle 
Signed-off-by: Greg Kroah-Hartman

MIPS: IRQ Stack: Unwind IRQ stack onto task stack

2017-10-08T08:14:19+00:00

[ Upstream commit db8466c581cca1a08b505f1319c3ecd246f16fa8 ]

When the separate IRQ stack was introduced, stack unwinding only
proceeded as far as the top of the IRQ stack, leading to kernel
backtraces being less useful, lacking the trace of what was interrupted.

Fix this by providing a means for the kernel to unwind the IRQ stack
onto the interrupted task stack. The processor state is saved to the
kernel task stack on interrupt. The IRQ_STACK_START macro reserves an
unsigned long at the top of the IRQ stack where the interrupted task
stack pointer can be saved. After the active stack is switched to the
IRQ stack, save the interrupted tasks stack pointer to the reserved
location.

Fix the stack unwinding code to look for the frame being the top of the
IRQ stack and if so get the next frame from the saved location. The
existing test does not work with the separate stack since the ra is no
longer pointed at ret_from_{irq,exception}.

The test to stop unwinding the stack 32 bytes from the top of a stack
must be modified to allow unwinding to continue up to the location of
the saved task stack pointer when on the IRQ stack. The low / high marks
of the stack are set depending on whether the sp is on an irq stack or
not.

Signed-off-by: Matt Redfearn 
Cc: Paolo Bonzini 
Cc: Marcin Nowakowski 
Cc: Masanari Iida 
Cc: Chris Metcalf 
Cc: James Hogan 
Cc: Paul Burton 
Cc: Ingo Molnar 
Cc: Jason A. Donenfeld 
Cc: Andrew Morton 
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15788/
Signed-off-by: Ralf Baechle 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman