linux-stable.git/arch/mips, branch v4.4.301

MIPS: Octeon: Fix build errors using clang

2022-01-27T07:46:19+00:00

[ Upstream commit 95339b70677dc6f9a2d669c4716058e71b8dc1c7 ]

A large number of the following errors is reported when compiling
with clang:

  cvmx-bootinfo.h:326:3: error: adding 'int' to a string does not append to the string [-Werror,-Wstring-plus-int]
                  ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_NULL)
                  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  cvmx-bootinfo.h:321:20: note: expanded from macro 'ENUM_BRD_TYPE_CASE'
          case x: return(#x + 16);        /* Skip CVMX_BOARD_TYPE_ */
                         ~~~^~~~
  cvmx-bootinfo.h:326:3: note: use array indexing to silence this warning
  cvmx-bootinfo.h:321:20: note: expanded from macro 'ENUM_BRD_TYPE_CASE'
          case x: return(#x + 16);        /* Skip CVMX_BOARD_TYPE_ */
                          ^

Follow the prompts to use the address operator '&' to fix this error.

Signed-off-by: Tianjia Zhang 
Reviewed-by: Nathan Chancellor 
Reviewed-by: Philippe Mathieu-Daudé 
Signed-off-by: Thomas Bogendoerfer 
Signed-off-by: Sasha Levin

mips: bcm63xx: add support for clk_set_parent()

2022-01-27T07:46:16+00:00

[ Upstream commit 6f03055d508ff4feb8db02ba3df9303a1db8d381 ]

The MIPS BMC63XX subarch does not provide/support clk_set_parent().
This causes build errors in a few drivers, so add a simple implementation
of that function so that callers of it will build without errors.

Fixes these build errors:

ERROR: modpost: "clk_set_parent" [sound/soc/jz4740/snd-soc-jz4740-i2s.ko] undefined!
ERROR: modpost: "clk_set_parent" [sound/soc/atmel/snd-soc-atmel-i2s.ko] undefined!

Fixes: e7300d04bd08 ("MIPS: BCM63xx: Add support for the Broadcom BCM63xx family of SOCs." )
Signed-off-by: Randy Dunlap 
Reviewed-by: Jonathan Cameron 
Acked-by: Florian Fainelli 
Signed-off-by: Thomas Bogendoerfer 
Signed-off-by: Sasha Levin

mips: lantiq: add support for clk_set_parent()

2022-01-27T07:46:16+00:00

[ Upstream commit 76f66dfd60dc5d2f9dec22d99091fea1035c5d03 ]

Provide a simple implementation of clk_set_parent() in the lantiq
subarch so that callers of it will build without errors.

Fixes these build errors:

ERROR: modpost: "clk_set_parent" [sound/soc/jz4740/snd-soc-jz4740-i2s.ko] undefined!
ERROR: modpost: "clk_set_parent" [sound/soc/atmel/snd-soc-atmel-i2s.ko] undefined!

Fixes: 171bb2f19ed6 ("MIPS: Lantiq: Add initial support for Lantiq SoCs")
Signed-off-by: Randy Dunlap 
Reported-by: kernel test robot 
--to=linux-mips@vger.kernel.org --cc="John Crispin " --cc="Jonathan Cameron " --cc="Russell King " --cc="Andy Shevchenko " --cc=alsa-devel@alsa-project.org --to="Thomas Bogendoerfer "
Reviewed-by: Jonathan Cameron 
Signed-off-by: Thomas Bogendoerfer 
Signed-off-by: Sasha Levin

mips: bcm63xx: add support for clk_get_parent()

2021-11-26T10:58:44+00:00

[ Upstream commit e8f67482e5a4bc8d0b65d606d08cb60ee123b468 ]

BCM63XX selects HAVE_LEGACY_CLK but does not provide/support
clk_get_parent(), so add a simple implementation of that
function so that callers of it will build without errors.

Fixes these build errors:

mips-linux-ld: drivers/iio/adc/ingenic-adc.o: in function `jz4770_adc_init_clk_div':
ingenic-adc.c:(.text+0xe4): undefined reference to `clk_get_parent'
mips-linux-ld: drivers/iio/adc/ingenic-adc.o: in function `jz4725b_adc_init_clk_div':
ingenic-adc.c:(.text+0x1b8): undefined reference to `clk_get_parent'

Fixes: e7300d04bd08 ("MIPS: BCM63xx: Add support for the Broadcom BCM63xx family of SOCs." )
Signed-off-by: Randy Dunlap 
Reported-by: kernel test robot 
Suggested-by: Russell King (Oracle) 
Cc: Artur Rojek 
Cc: Paul Cercueil 
Cc: linux-mips@vger.kernel.org
Cc: Jonathan Cameron 
Cc: Lars-Peter Clausen 
Cc: linux-iio@vger.kernel.org
Cc: Florian Fainelli 
Cc: Andy Shevchenko 
Cc: Russell King 
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: Jonas Gorski 
Reviewed-by: Andy Shevchenko 
Acked-by: Jonathan Cameron 
Acked-by: Russell King (Oracle) 
Acked-by: Florian Fainelli 
Signed-off-by: Thomas Bogendoerfer 
Signed-off-by: Sasha Levin

mips: BCM63XX: ensure that CPU_SUPPORTS_32BIT_KERNEL is set

2021-11-26T10:58:43+00:00

[ Upstream commit 5eeaafc8d69373c095e461bdb39e5c9b62228ac5 ]

Several header files need info on CONFIG_32BIT or CONFIG_64BIT,
but kconfig symbol BCM63XX does not provide that info. This leads
to many build errors, e.g.:

   arch/mips/include/asm/page.h:196:13: error: use of undeclared identifier 'CAC_BASE'
           return x - PAGE_OFFSET + PHYS_OFFSET;
   arch/mips/include/asm/mach-generic/spaces.h:91:23: note: expanded from macro 'PAGE_OFFSET'
   #define PAGE_OFFSET             (CAC_BASE + PHYS_OFFSET)
   arch/mips/include/asm/io.h:134:28: error: use of undeclared identifier 'CAC_BASE'
           return (void *)(address + PAGE_OFFSET - PHYS_OFFSET);
   arch/mips/include/asm/mach-generic/spaces.h:91:23: note: expanded from macro 'PAGE_OFFSET'
   #define PAGE_OFFSET             (CAC_BASE + PHYS_OFFSET)

arch/mips/include/asm/uaccess.h:82:10: error: use of undeclared identifier '__UA_LIMIT'
           return (__UA_LIMIT & (addr | (addr + size) | __ua_size(size))) == 0;

Selecting the SYS_HAS_CPU_BMIPS* symbols causes SYS_HAS_CPU_BMIPS to be
set, which then selects CPU_SUPPORT_32BIT_KERNEL, which causes
CONFIG_32BIT to be set. (a bit more indirect than v1 [RFC].)

Fixes: e7300d04bd08 ("MIPS: BCM63xx: Add support for the Broadcom BCM63xx family of SOCs.")
Signed-off-by: Randy Dunlap 
Reported-by: kernel test robot 
Cc: Thomas Bogendoerfer 
Cc: Florian Fainelli 
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: linux-mips@vger.kernel.org
Cc: Paul Burton 
Cc: Maxime Bizon 
Cc: Ralf Baechle 
Suggested-by: Florian Fainelli 
Acked-by: Florian Fainelli 
Signed-off-by: Thomas Bogendoerfer 
Signed-off-by: Sasha Levin

MIPS: sni: Fix the build

2021-11-26T10:58:43+00:00

[ Upstream commit c91cf42f61dc77b289784ea7b15a8531defa41c0 ]

This patch fixes the following gcc 10 build error:

arch/mips/sni/time.c: In function ‘a20r_set_periodic’:
arch/mips/sni/time.c:15:26: error: unsigned conversion from ‘int’ to ‘u8’ {aka ‘volatile unsigned char’} changes value from ‘576’ to ‘64’ [-Werror=overflow]
   15 | #define SNI_COUNTER0_DIV ((SNI_CLOCK_TICK_RATE / SNI_COUNTER2_DIV) / HZ)
      |                          ^
arch/mips/sni/time.c:21:45: note: in expansion of macro ‘SNI_COUNTER0_DIV’
   21 |  *(volatile u8 *)(A20R_PT_CLOCK_BASE + 0) = SNI_COUNTER0_DIV;
      |                                             ^~~~~~~~~~~~~~~~

Cc: linux-mips@vger.kernel.org
Signed-off-by: Bart Van Assche 
Signed-off-by: Thomas Bogendoerfer 
Signed-off-by: Sasha Levin

MIPS: lantiq: dma: reset correct number of channel

2021-11-26T10:58:37+00:00

[ Upstream commit 5ca9ce2ba4d5884cd94d1a856c675ab1242cd242 ]

Different SoCs have a different number of channels, e.g .:
* amazon-se has 10 channels,
* danube+ar9 have 20 channels,
* vr9 has 28 channels,
* ar10 has 24 channels.

We can read the ID register and, depending on the reported
number of channels, reset the appropriate number of channels.

Signed-off-by: Aleksander Jan Bajkowski 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

MIPS: lantiq: dma: add small delay after reset

2021-11-26T10:58:37+00:00

[ Upstream commit c12aa581f6d5e80c3c3675ab26a52c2b3b62f76e ]

Reading the DMA registers immediately after the reset causes
Data Bus Error. Adding a small delay fixes this issue.

Signed-off-by: Aleksander Jan Bajkowski 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

MIPS: Malta: Do not byte-swap accesses to the CBUS UART

2021-08-15T10:59:56+00:00

commit 9a936d6c3d3d6c33ecbadf72dccdb567b5cd3c72 upstream.

Correct big-endian accesses to the CBUS UART, a Malta on-board discrete
TI16C550C part wired directly to the system controller's device bus, and
do not use byte swapping with the 32-bit accesses to the device.

The CBUS is used for devices such as the boot flash memory needed early
on in system bootstrap even before PCI has been initialised.  Therefore
it uses the system controller's device bus, which follows the endianness
set with the CPU, which means no byte-swapping is ever required for data
accesses to CBUS, unlike with PCI.

The CBUS UART uses the UPIO_MEM32 access method, that is the `readl' and
`writel' MMIO accessors, which on the MIPS platform imply byte-swapping
with PCI systems.  Consequently the wrong byte lane is accessed with the
big-endian configuration and the UART is not correctly accessed.

As it happens the UPIO_MEM32BE access method makes use of the `ioread32'
and `iowrite32' MMIO accessors, which still use `readl' and `writel'
respectively, however they byte-swap data passed, effectively cancelling
swapping done with the accessors themselves and making it suitable for
the CBUS UART.

Make the CBUS UART switch between UPIO_MEM32 and UPIO_MEM32BE then,
based on the endianness selected.  With this change in place the device
is correctly recognised with big-endian Malta at boot, along with the
Super I/O devices behind PCI:

Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled
printk: console [ttyS0] disabled
serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
printk: console [ttyS0] enabled
printk: bootconsole [uart8250] disabled
serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
serial8250.0: ttyS2 at MMIO 0x1f000900 (irq = 20, base_baud = 230400) is a 16550A

Fixes: e7c4782f92fc ("[MIPS] Put an end to 's long and annyoing existence")
Cc: stable@vger.kernel.org # v2.6.23+
Reviewed-by: Philippe Mathieu-Daudé 
Signed-off-by: Maciej W. Rozycki 
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2106260524430.37803@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman

mips: Fix non-POSIX regexp

2021-08-15T10:59:54+00:00

[ Upstream commit 28bbbb9875a35975904e46f9b06fa689d051b290 ]

When cross compiling a MIPS kernel on a BSD based HOSTCC leads
to errors like

  SYNC    include/config/auto.conf.cmd - due to: .config
egrep: empty (sub)expression
  UPD     include/config/kernel.release
  HOSTCC  scripts/dtc/dtc.o - due to target missing

It turns out that egrep uses this egrep pattern:

		(|MINOR_|PATCHLEVEL_)

This is not valid syntax or gives undefined results according
to POSIX 9.5.3 ERE Grammar

	https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap09.html

It seems to be silently accepted by the Linux egrep implementation
while a BSD host complains.

Such patterns can be replaced by a transformation like

	"(|p1|p2)" -> "(p1|p2)?"

Fixes: 48c35b2d245f ("[MIPS] There is no __GNUC_MAJOR__")
Signed-off-by: H. Nikolaus Schaller 
Signed-off-by: Masahiro Yamada 
Signed-off-by: Sasha Levin