linux-stable.git/arch/mips, branch v4.4.283 Linux kernel stable tree MIPS: Malta: Do not byte-swap accesses to the CBUS UART 2021-08-15T10:59:56+00:00 Maciej W. Rozycki macro@orcam.me.uk 2021-06-26T04:11:13+00:00 5c824d48e2ec220e669c166e18b17678f3ba324d commit 9a936d6c3d3d6c33ecbadf72dccdb567b5cd3c72 upstream. Correct big-endian accesses to the CBUS UART, a Malta on-board discrete TI16C550C part wired directly to the system controller's device bus, and do not use byte swapping with the 32-bit accesses to the device. The CBUS is used for devices such as the boot flash memory needed early on in system bootstrap even before PCI has been initialised. Therefore it uses the system controller's device bus, which follows the endianness set with the CPU, which means no byte-swapping is ever required for data accesses to CBUS, unlike with PCI. The CBUS UART uses the UPIO_MEM32 access method, that is the `readl' and `writel' MMIO accessors, which on the MIPS platform imply byte-swapping with PCI systems. Consequently the wrong byte lane is accessed with the big-endian configuration and the UART is not correctly accessed. As it happens the UPIO_MEM32BE access method makes use of the `ioread32' and `iowrite32' MMIO accessors, which still use `readl' and `writel' respectively, however they byte-swap data passed, effectively cancelling swapping done with the accessors themselves and making it suitable for the CBUS UART. Make the CBUS UART switch between UPIO_MEM32 and UPIO_MEM32BE then, based on the endianness selected. With this change in place the device is correctly recognised with big-endian Malta at boot, along with the Super I/O devices behind PCI: Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled printk: console [ttyS0] disabled serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A printk: console [ttyS0] enabled printk: bootconsole [uart8250] disabled serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A serial8250.0: ttyS2 at MMIO 0x1f000900 (irq = 20, base_baud = 230400) is a 16550A Fixes: e7c4782f92fc ("[MIPS] Put an end to <asm/serial.h>'s long and annyoing existence") Cc: stable@vger.kernel.org # v2.6.23+ Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2106260524430.37803@angie.orcam.me.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 9a936d6c3d3d6c33ecbadf72dccdb567b5cd3c72 upstream.

Correct big-endian accesses to the CBUS UART, a Malta on-board discrete
TI16C550C part wired directly to the system controller's device bus, and
do not use byte swapping with the 32-bit accesses to the device.

The CBUS is used for devices such as the boot flash memory needed early
on in system bootstrap even before PCI has been initialised.  Therefore
it uses the system controller's device bus, which follows the endianness
set with the CPU, which means no byte-swapping is ever required for data
accesses to CBUS, unlike with PCI.

The CBUS UART uses the UPIO_MEM32 access method, that is the `readl' and
`writel' MMIO accessors, which on the MIPS platform imply byte-swapping
with PCI systems.  Consequently the wrong byte lane is accessed with the
big-endian configuration and the UART is not correctly accessed.

As it happens the UPIO_MEM32BE access method makes use of the `ioread32'
and `iowrite32' MMIO accessors, which still use `readl' and `writel'
respectively, however they byte-swap data passed, effectively cancelling
swapping done with the accessors themselves and making it suitable for
the CBUS UART.

Make the CBUS UART switch between UPIO_MEM32 and UPIO_MEM32BE then,
based on the endianness selected.  With this change in place the device
is correctly recognised with big-endian Malta at boot, along with the
Super I/O devices behind PCI:

Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled
printk: console [ttyS0] disabled
serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
printk: console [ttyS0] enabled
printk: bootconsole [uart8250] disabled
serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
serial8250.0: ttyS2 at MMIO 0x1f000900 (irq = 20, base_baud = 230400) is a 16550A

Fixes: e7c4782f92fc ("[MIPS] Put an end to <asm/serial.h>'s long and annyoing existence")
Cc: stable@vger.kernel.org # v2.6.23+
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2106260524430.37803@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mips: Fix non-POSIX regexp 2021-08-15T10:59:54+00:00 H. Nikolaus Schaller hns@goldelico.com 2021-07-08T08:57:10+00:00 b2386d801f2e70a851c057f1ce0f775018cbb540 [ Upstream commit 28bbbb9875a35975904e46f9b06fa689d051b290 ] When cross compiling a MIPS kernel on a BSD based HOSTCC leads to errors like SYNC include/config/auto.conf.cmd - due to: .config egrep: empty (sub)expression UPD include/config/kernel.release HOSTCC scripts/dtc/dtc.o - due to target missing It turns out that egrep uses this egrep pattern: (|MINOR_|PATCHLEVEL_) This is not valid syntax or gives undefined results according to POSIX 9.5.3 ERE Grammar https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap09.html It seems to be silently accepted by the Linux egrep implementation while a BSD host complains. Such patterns can be replaced by a transformation like "(|p1|p2)" -> "(p1|p2)?" Fixes: 48c35b2d245f ("[MIPS] There is no __GNUC_MAJOR__") Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 28bbbb9875a35975904e46f9b06fa689d051b290 ]

When cross compiling a MIPS kernel on a BSD based HOSTCC leads
to errors like

  SYNC    include/config/auto.conf.cmd - due to: .config
egrep: empty (sub)expression
  UPD     include/config/kernel.release
  HOSTCC  scripts/dtc/dtc.o - due to target missing

It turns out that egrep uses this egrep pattern:

		(|MINOR_|PATCHLEVEL_)

This is not valid syntax or gives undefined results according
to POSIX 9.5.3 ERE Grammar

	https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap09.html

It seems to be silently accepted by the Linux egrep implementation
while a BSD host complains.

Such patterns can be replaced by a transformation like

	"(|p1|p2)" -> "(p1|p2)?"

Fixes: 48c35b2d245f ("[MIPS] There is no __GNUC_MAJOR__")
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
MIPS: vdso: Invalid GIC access through VDSO 2021-07-20T14:22:44+00:00 Martin Fäcknitz faecknitz@hotsplots.de 2021-07-05T00:03:54+00:00 c41c926d9dfb3c81da370faf678eb06f7f48ba77 [ Upstream commit 47ce8527fbba145a7723685bc9a27d9855e06491 ] Accessing raw timers (currently only CLOCK_MONOTONIC_RAW) through VDSO doesn't return the correct time when using the GIC as clock source. The address of the GIC mapped page is in this case not calculated correctly. The GIC mapped page is calculated from the VDSO data by subtracting PAGE_SIZE: void *get_gic(const struct vdso_data *data) { return (void __iomem *)data - PAGE_SIZE; } However, the data pointer is not page aligned for raw clock sources. This is because the VDSO data for raw clock sources (CS_RAW = 1) is stored after the VDSO data for coarse clock sources (CS_HRES_COARSE = 0). Therefore, only the VDSO data for CS_HRES_COARSE is page aligned: +--------------------+ | | | vd[CS_RAW] | ---+ | vd[CS_HRES_COARSE] | | +--------------------+ | -PAGE_SIZE | | | | GIC mapped page | <--+ | | +--------------------+ When __arch_get_hw_counter() is called with &vd[CS_RAW], get_gic returns the wrong address (somewhere inside the GIC mapped page). The GIC counter values are not returned which results in an invalid time. Fixes: a7f4df4e21dd ("MIPS: VDSO: Add implementations of gettimeofday() and clock_gettime()") Signed-off-by: Martin Fäcknitz <faecknitz@hotsplots.de> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 47ce8527fbba145a7723685bc9a27d9855e06491 ]

Accessing raw timers (currently only CLOCK_MONOTONIC_RAW) through VDSO
doesn't return the correct time when using the GIC as clock source.
The address of the GIC mapped page is in this case not calculated
correctly. The GIC mapped page is calculated from the VDSO data by
subtracting PAGE_SIZE:

  void *get_gic(const struct vdso_data *data) {
    return (void __iomem *)data - PAGE_SIZE;
  }

However, the data pointer is not page aligned for raw clock sources.
This is because the VDSO data for raw clock sources (CS_RAW = 1) is
stored after the VDSO data for coarse clock sources (CS_HRES_COARSE = 0).
Therefore, only the VDSO data for CS_HRES_COARSE is page aligned:

  +--------------------+
  |                    |
  | vd[CS_RAW]         | ---+
  | vd[CS_HRES_COARSE] |    |
  +--------------------+    | -PAGE_SIZE
  |                    |    |
  |  GIC mapped page   | <--+
  |                    |
  +--------------------+

When __arch_get_hw_counter() is called with &vd[CS_RAW], get_gic returns
the wrong address (somewhere inside the GIC mapped page). The GIC counter
values are not returned which results in an invalid time.

Fixes: a7f4df4e21dd ("MIPS: VDSO: Add implementations of gettimeofday() and clock_gettime()")
Signed-off-by: Martin Fäcknitz <faecknitz@hotsplots.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
mips: disable branch profiling in boot/decompress.o 2021-07-20T14:22:44+00:00 Randy Dunlap rdunlap@infradead.org 2021-07-04T23:02:11+00:00 6b968fd44517cf93df5986b06824bc976379b937 [ Upstream commit 97e488073cfca0eea84450169ca4cbfcc64e33e3 ] Use DISABLE_BRANCH_PROFILING for arch/mips/boot/compressed/decompress.o to prevent linkage errors. mips64-linux-ld: arch/mips/boot/compressed/decompress.o: in function `LZ4_decompress_fast_extDict': decompress.c:(.text+0x8c): undefined reference to `ftrace_likely_update' mips64-linux-ld: decompress.c:(.text+0xf4): undefined reference to `ftrace_likely_update' mips64-linux-ld: decompress.c:(.text+0x200): undefined reference to `ftrace_likely_update' mips64-linux-ld: decompress.c:(.text+0x230): undefined reference to `ftrace_likely_update' mips64-linux-ld: decompress.c:(.text+0x320): undefined reference to `ftrace_likely_update' mips64-linux-ld: arch/mips/boot/compressed/decompress.o:decompress.c:(.text+0x3f4): more undefined references to `ftrace_likely_update' follow Fixes: e76e1fdfa8f8 ("lib: add support for LZ4-compressed kernel") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: linux-mips@vger.kernel.org Cc: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 97e488073cfca0eea84450169ca4cbfcc64e33e3 ]

Use DISABLE_BRANCH_PROFILING for arch/mips/boot/compressed/decompress.o
to prevent linkage errors.

mips64-linux-ld: arch/mips/boot/compressed/decompress.o: in function `LZ4_decompress_fast_extDict':
decompress.c:(.text+0x8c): undefined reference to `ftrace_likely_update'
mips64-linux-ld: decompress.c:(.text+0xf4): undefined reference to `ftrace_likely_update'
mips64-linux-ld: decompress.c:(.text+0x200): undefined reference to `ftrace_likely_update'
mips64-linux-ld: decompress.c:(.text+0x230): undefined reference to `ftrace_likely_update'
mips64-linux-ld: decompress.c:(.text+0x320): undefined reference to `ftrace_likely_update'
mips64-linux-ld: arch/mips/boot/compressed/decompress.o:decompress.c:(.text+0x3f4): more undefined references to `ftrace_likely_update' follow

Fixes: e76e1fdfa8f8 ("lib: add support for LZ4-compressed kernel")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Cc: Kyungsik Lee <kyungsik.lee@lge.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
hugetlb: clear huge pte during flush function on mips platform 2021-07-20T14:22:37+00:00 Bibo Mao maobibo@loongson.cn 2020-06-29T13:15:32+00:00 8fd3c6d9c042f57480013e5c9e94a4f2a5b8079c [ Upstream commit 33ae8f801ad8bec48e886d368739feb2816478f2 ] If multiple threads are accessing the same huge page at the same time, hugetlb_cow will be called if one thread write the COW huge page. And function huge_ptep_clear_flush is called to notify other threads to clear the huge pte tlb entry. The other threads clear the huge pte tlb entry and reload it from page table, the reload huge pte entry may be old. This patch fixes this issue on mips platform, and it clears huge pte entry before notifying other threads to flush current huge page entry, it is similar with other architectures. Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 33ae8f801ad8bec48e886d368739feb2816478f2 ]

If multiple threads are accessing the same huge page at the same
time, hugetlb_cow will be called if one thread write the COW huge
page. And function huge_ptep_clear_flush is called to notify other
threads to clear the huge pte tlb entry. The other threads clear
the huge pte tlb entry and reload it from page table, the reload
huge pte entry may be old.

This patch fixes this issue on mips platform, and it clears huge
pte entry before notifying other threads to flush current huge
page entry, it is similar with other architectures.

Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
MIPS: Fix kernel hang under FUNCTION_GRAPH_TRACER and PREEMPT_TRACER 2021-06-16T09:34:52+00:00 Tiezhu Yang yangtiezhu@loongson.cn 2021-05-15T11:02:01+00:00 d069f110fb74b1dc206e524fc6b187b3dd5486d1 [ Upstream commit 78cf0eb926cb1abeff2106bae67752e032fe5f3e ] When update the latest mainline kernel with the following three configs, the kernel hangs during startup: (1) CONFIG_FUNCTION_GRAPH_TRACER=y (2) CONFIG_PREEMPT_TRACER=y (3) CONFIG_FTRACE_STARTUP_TEST=y When update the latest mainline kernel with the above two configs (1) and (2), the kernel starts normally, but it still hangs when execute the following command: echo "function_graph" > /sys/kernel/debug/tracing/current_tracer Without CONFIG_PREEMPT_TRACER=y, the above two kinds of kernel hangs disappeared, so it seems that CONFIG_PREEMPT_TRACER has some influences with function_graph tracer at the first glance. I use ejtag to find out the epc address is related with preempt_enable() in the file arch/mips/lib/mips-atomic.c, because function tracing can trace the preempt_{enable,disable} calls that are traced, replace them with preempt_{enable,disable}_notrace to prevent function tracing from going into an infinite loop, and then it can fix the kernel hang issue. By the way, it seems that this commit is a complement and improvement of commit f93a1a00f2bd ("MIPS: Fix crash that occurs when function tracing is enabled"). Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 78cf0eb926cb1abeff2106bae67752e032fe5f3e ]

When update the latest mainline kernel with the following three configs,
the kernel hangs during startup:

(1) CONFIG_FUNCTION_GRAPH_TRACER=y
(2) CONFIG_PREEMPT_TRACER=y
(3) CONFIG_FTRACE_STARTUP_TEST=y

When update the latest mainline kernel with the above two configs (1)
and (2), the kernel starts normally, but it still hangs when execute
the following command:

echo "function_graph" > /sys/kernel/debug/tracing/current_tracer

Without CONFIG_PREEMPT_TRACER=y, the above two kinds of kernel hangs
disappeared, so it seems that CONFIG_PREEMPT_TRACER has some influences
with function_graph tracer at the first glance.

I use ejtag to find out the epc address is related with preempt_enable()
in the file arch/mips/lib/mips-atomic.c, because function tracing can
trace the preempt_{enable,disable} calls that are traced, replace them
with preempt_{enable,disable}_notrace to prevent function tracing from
going into an infinite loop, and then it can fix the kernel hang issue.

By the way, it seems that this commit is a complement and improvement of
commit f93a1a00f2bd ("MIPS: Fix crash that occurs when function tracing
is enabled").

Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
MIPS: ralink: export rt_sysc_membase for rt2880_wdt.c 2021-06-03T06:22:09+00:00 Randy Dunlap rdunlap@infradead.org 2021-05-17T00:54:17+00:00 78de841caf3c2f0e45e896a4f7e437a57a4c70d7 [ Upstream commit fef532ea0cd871afab7d9a7b6e9da99ac2c24371 ] rt2880_wdt.c uses (well, attempts to use) rt_sysc_membase. However, when this watchdog driver is built as a loadable module, there is a build error since the rt_sysc_membase symbol is not exported. Export it to quell the build error. ERROR: modpost: "rt_sysc_membase" [drivers/watchdog/rt2880_wdt.ko] undefined! Fixes: 473cf939ff34 ("watchdog: add ralink watchdog driver") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: John Crispin <john@phrozen.org> Cc: linux-mips@vger.kernel.org Cc: linux-watchdog@vger.kernel.org Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit fef532ea0cd871afab7d9a7b6e9da99ac2c24371 ]

rt2880_wdt.c uses (well, attempts to use) rt_sysc_membase. However,
when this watchdog driver is built as a loadable module, there is a
build error since the rt_sysc_membase symbol is not exported.
Export it to quell the build error.

ERROR: modpost: "rt_sysc_membase" [drivers/watchdog/rt2880_wdt.ko] undefined!

Fixes: 473cf939ff34 ("watchdog: add ralink watchdog driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: John Crispin <john@phrozen.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-watchdog@vger.kernel.org
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
MIPS: alchemy: xxs1500: add gpio-au1000.h header file 2021-06-03T06:22:09+00:00 Randy Dunlap rdunlap@infradead.org 2021-05-17T00:01:08+00:00 72f0a9bbbffb450b1020200b4c17ea5bac66ad79 [ Upstream commit ff4cff962a7eedc73e54b5096693da7f86c61346 ] board-xxs1500.c references 2 functions without declaring them, so add the header file to placate the build. ../arch/mips/alchemy/board-xxs1500.c: In function 'board_setup': ../arch/mips/alchemy/board-xxs1500.c:56:2: error: implicit declaration of function 'alchemy_gpio1_input_enable' [-Werror=implicit-function-declaration] 56 | alchemy_gpio1_input_enable(); ../arch/mips/alchemy/board-xxs1500.c:57:2: error: implicit declaration of function 'alchemy_gpio2_enable'; did you mean 'alchemy_uart_enable'? [-Werror=implicit-function-declaration] 57 | alchemy_gpio2_enable(); Fixes: 8e026910fcd4 ("MIPS: Alchemy: merge GPR/MTX-1/XXS1500 board code into single files") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: linux-mips@vger.kernel.org Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Acked-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit ff4cff962a7eedc73e54b5096693da7f86c61346 ]

board-xxs1500.c references 2 functions without declaring them, so add
the header file to placate the build.

../arch/mips/alchemy/board-xxs1500.c: In function 'board_setup':
../arch/mips/alchemy/board-xxs1500.c:56:2: error: implicit declaration of function 'alchemy_gpio1_input_enable' [-Werror=implicit-function-declaration]
   56 |  alchemy_gpio1_input_enable();
../arch/mips/alchemy/board-xxs1500.c:57:2: error: implicit declaration of function 'alchemy_gpio2_enable'; did you mean 'alchemy_uart_enable'? [-Werror=implicit-function-declaration]
   57 |  alchemy_gpio2_enable();

Fixes: 8e026910fcd4 ("MIPS: Alchemy: merge GPR/MTX-1/XXS1500 board code into single files")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Cc: Manuel Lauss <manuel.lauss@googlemail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
MIPS: lantiq: Explicitly compare LTQ_EBU_PCC_ISTAT against 0 2021-03-03T15:44:17+00:00 Nathan Chancellor natechancellor@gmail.com 2021-01-05T20:15:48+00:00 70738fc740c653266611220438a0438e04d6ff00 [ Upstream commit c6f2a9e17b9bef7677caddb1626c2402f3e9d2bd ] When building xway_defconfig with clang: arch/mips/lantiq/irq.c:305:48: error: use of logical '&&' with constant operand [-Werror,-Wconstant-logical-operand] if ((irq == LTQ_ICU_EBU_IRQ) && (module == 0) && LTQ_EBU_PCC_ISTAT) ^ ~~~~~~~~~~~~~~~~~ arch/mips/lantiq/irq.c:305:48: note: use '&' for a bitwise operation if ((irq == LTQ_ICU_EBU_IRQ) && (module == 0) && LTQ_EBU_PCC_ISTAT) ^~ & arch/mips/lantiq/irq.c:305:48: note: remove constant to silence this warning if ((irq == LTQ_ICU_EBU_IRQ) && (module == 0) && LTQ_EBU_PCC_ISTAT) ~^~~~~~~~~~~~~~~~~~~~ 1 error generated. Explicitly compare the constant LTQ_EBU_PCC_ISTAT against 0 to fix the warning. Additionally, remove the unnecessary parentheses as this is a simple conditional statement and shorthand '== 0' to '!'. Fixes: 3645da0276ae ("OF: MIPS: lantiq: implement irq_domain support") Link: https://github.com/ClangBuiltLinux/linux/issues/807 Reported-by: Dmitry Golovin <dima@golovin.in> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit c6f2a9e17b9bef7677caddb1626c2402f3e9d2bd ]

When building xway_defconfig with clang:

arch/mips/lantiq/irq.c:305:48: error: use of logical '&&' with constant
operand [-Werror,-Wconstant-logical-operand]
        if ((irq == LTQ_ICU_EBU_IRQ) && (module == 0) && LTQ_EBU_PCC_ISTAT)
                                                      ^ ~~~~~~~~~~~~~~~~~
arch/mips/lantiq/irq.c:305:48: note: use '&' for a bitwise operation
        if ((irq == LTQ_ICU_EBU_IRQ) && (module == 0) && LTQ_EBU_PCC_ISTAT)
                                                      ^~
                                                      &
arch/mips/lantiq/irq.c:305:48: note: remove constant to silence this
warning
        if ((irq == LTQ_ICU_EBU_IRQ) && (module == 0) && LTQ_EBU_PCC_ISTAT)
                                                     ~^~~~~~~~~~~~~~~~~~~~
1 error generated.

Explicitly compare the constant LTQ_EBU_PCC_ISTAT against 0 to fix the
warning. Additionally, remove the unnecessary parentheses as this is a
simple conditional statement and shorthand '== 0' to '!'.

Fixes: 3645da0276ae ("OF: MIPS: lantiq: implement irq_domain support")
Link: https://github.com/ClangBuiltLinux/linux/issues/807
Reported-by: Dmitry Golovin <dima@golovin.in>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
MIPS: c-r4k: Fix section mismatch for loongson2_sc_init 2021-03-03T15:44:16+00:00 Nathan Chancellor natechancellor@gmail.com 2021-01-05T20:34:56+00:00 f70cd6d47cac6f0d15c2421b682ccc0bed32cd6f [ Upstream commit c58734eee6a2151ba033c0dcb31902c89e310374 ] When building with clang, the following section mismatch warning occurs: WARNING: modpost: vmlinux.o(.text+0x24490): Section mismatch in reference from the function r4k_cache_init() to the function .init.text:loongson2_sc_init() This should have been fixed with commit ad4fddef5f23 ("mips: fix Section mismatch in reference") but it was missed. Remove the improper __init annotation like that commit did. Fixes: 078a55fc824c ("MIPS: Delete __cpuinit/__CPUINIT usage from MIPS code") Link: https://github.com/ClangBuiltLinux/linux/issues/787 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Huacai Chen <chenhuacai@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit c58734eee6a2151ba033c0dcb31902c89e310374 ]

When building with clang, the following section mismatch warning occurs:

WARNING: modpost: vmlinux.o(.text+0x24490): Section mismatch in
reference from the function r4k_cache_init() to the function
.init.text:loongson2_sc_init()

This should have been fixed with commit ad4fddef5f23 ("mips: fix Section
mismatch in reference") but it was missed. Remove the improper __init
annotation like that commit did.

Fixes: 078a55fc824c ("MIPS: Delete __cpuinit/__CPUINIT usage from MIPS code")
Link: https://github.com/ClangBuiltLinux/linux/issues/787
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>