linux-stable.git/arch/mips, branch v4.4.18

KEYS: 64-bit MIPS needs to use compat_sys_keyctl for 32-bit userspace

2016-08-16T07:30:49+00:00

commit 20f06ed9f61a185c6dabd662c310bed6189470df upstream.

MIPS64 needs to use compat_sys_keyctl for 32-bit userspace rather than
calling sys_keyctl.  The latter will work in a lot of cases, thereby hiding
the issue.

Reported-by: Stephan Mueller 
Signed-off-by: David Howells 
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-security-module@vger.kernel.org
Cc: keyrings@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13832/
Signed-off-by: Ralf Baechle 
Signed-off-by: Greg Kroah-Hartman

MIPS: KVM: Fix modular KVM under QEMU

2016-07-27T16:47:30+00:00

commit 797179bc4fe06c89e47a9f36f886f68640b423f8 upstream.

Copy __kvm_mips_vcpu_run() into unmapped memory, so that we can never
get a TLB refill exception in it when KVM is built as a module.

This was observed to happen with the host MIPS kernel running under
QEMU, due to a not entirely transparent optimisation in the QEMU TLB
handling where TLB entries replaced with TLBWR are copied to a separate
part of the TLB array. Code in those pages continue to be executable,
but those mappings persist only until the next ASID switch, even if they
are marked global.

An ASID switch happens in __kvm_mips_vcpu_run() at exception level after
switching to the guest exception base. Subsequent TLB mapped kernel
instructions just prior to switching to the guest trigger a TLB refill
exception, which enters the guest exception handlers without updating
EPC. This appears as a guest triggered TLB refill on a host kernel
mapped (host KSeg2) address, which is not handled correctly as user
(guest) mode accesses to kernel (host) segments always generate address
error exceptions.

Signed-off-by: James Hogan 
Cc: Paolo Bonzini 
Cc: Radim Krčmář 
Cc: Ralf Baechle 
Cc: kvm@vger.kernel.org
Cc: linux-mips@linux-mips.org
Signed-off-by: Paolo Bonzini 
Signed-off-by: Greg Kroah-Hartman

MIPS: Fix 64k page support for 32 bit kernels.

2016-06-24T17:18:22+00:00

commit d7de413475f443957a0c1d256e405d19b3a2cb22 upstream.

TASK_SIZE was defined as 0x7fff8000UL which for 64k pages is not a
multiple of the page size.  Somewhere further down the math fails
such that executing an ELF binary fails.

Signed-off-by: Ralf Baechle 
Tested-by: Joshua Henderson 
Cc: James Hogan 
Signed-off-by: Greg Kroah-Hartman

MIPS: VDSO: Build with `-fno-strict-aliasing'

2016-06-08T01:14:32+00:00

commit 94cc36b84acc29f543b48bc5ed786011b112a666 upstream.

Avoid an aliasing issue causing a build error in VDSO:

In file included from include/linux/srcu.h:34:0,
                 from include/linux/notifier.h:15,
                 from ./arch/mips/include/asm/uprobes.h:9,
                 from include/linux/uprobes.h:61,
                 from include/linux/mm_types.h:13,
                 from ./arch/mips/include/asm/vdso.h:14,
                 from arch/mips/vdso/vdso.h:27,
                 from arch/mips/vdso/gettimeofday.c:11:
include/linux/workqueue.h: In function 'work_static':
include/linux/workqueue.h:186:2: error: dereferencing type-punned pointer will break strict-aliasing rules [-Werror=strict-aliasing]
  return *work_data_bits(work) & WORK_STRUCT_STATIC;
  ^
cc1: all warnings being treated as errors
make[2]: *** [arch/mips/vdso/gettimeofday.o] Error 1

with a CONFIG_DEBUG_OBJECTS_WORK configuration and GCC 5.2.0.  Include
`-fno-strict-aliasing' along with compiler options used, as required for
kernel code, fixing a problem present since the introduction of VDSO
with commit ebb5e78cc634 ("MIPS: Initial implementation of a VDSO").

Thanks to Tejun for diagnosing this properly!

Signed-off-by: Maciej W. Rozycki 
Reviewed-by: James Hogan 
Fixes: ebb5e78cc634 ("MIPS: Initial implementation of a VDSO")
Cc: Tejun Heo 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13357/
Signed-off-by: Ralf Baechle 
Signed-off-by: Greg Kroah-Hartman

MIPS: lib: Mark intrinsics notrace

2016-06-08T01:14:32+00:00

commit aedcfbe06558a9f53002e82d5be64c6c94687726 upstream.

On certain MIPS32 devices, the ftrace tracer "function_graph" uses
__lshrdi3() during the capturing of trace data. ftrace then attempts to
trace __lshrdi3() which leads to infinite recursion and a stack overflow.
Fix this by marking __lshrdi3() as notrace. Mark the other compiler
intrinsics as notrace in case the compiler decides to use them in the
ftrace path.

Signed-off-by: Harvey Hunt 
Cc: 
Cc: 
Patchwork: https://patchwork.linux-mips.org/patch/13354/
Signed-off-by: Ralf Baechle 
Signed-off-by: Greg Kroah-Hartman

MIPS: Build microMIPS VDSO for microMIPS kernels

2016-06-08T01:14:32+00:00

commit bb93078e655be1e24d68f28f2756676e62c037ce upstream.

MicroMIPS kernels may be expected to run on microMIPS only cores which
don't support the normal MIPS instruction set, so be sure to pass the
-mmicromips flag through to the VDSO cflags.

Fixes: ebb5e78cc634 ("MIPS: Initial implementation of a VDSO")
Signed-off-by: James Hogan 
Cc: Paul Burton 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13349/
Signed-off-by: Ralf Baechle 
Signed-off-by: Greg Kroah-Hartman

MIPS: Fix sigreturn via VDSO on microMIPS kernel

2016-06-08T01:14:31+00:00

commit 13eb192d10bcc9ac518d57356179071d603bcb4e upstream.

In microMIPS kernels, handle_signal() sets the isa16 mode bit in the
vdso address so that the sigreturn trampolines (which are offset from
the VDSO) get executed as microMIPS.

However commit ebb5e78cc634 ("MIPS: Initial implementation of a VDSO")
changed the offsets to come from the VDSO image, which already have the
isa16 mode bit set correctly since they're extracted from the VDSO
shared library symbol table.

Drop the isa16 mode bit handling from handle_signal() to fix sigreturn
for cores which support both microMIPS and normal MIPS. This doesn't fix
microMIPS only cores, since the VDSO is still built for normal MIPS, but
thats a separate problem.

Fixes: ebb5e78cc634 ("MIPS: Initial implementation of a VDSO")
Signed-off-by: James Hogan 
Cc: Paul Burton 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13348/
Signed-off-by: Ralf Baechle 
Signed-off-by: Greg Kroah-Hartman

MIPS: ptrace: Prevent writes to read-only FCSR bits

2016-06-08T01:14:31+00:00

commit abf378be49f38c4d3e23581d3df3fa9f1b1b11d2 upstream.

Correct the cases missed with commit 9b26616c8d9d ("MIPS: Respect the
ISA level in FCSR handling") and prevent writes to read-only FCSR bits
there.

This in particular applies to FP context initialisation where any IEEE
754-2008 bits preset by `mips_set_personality_nan' are cleared before
the relevant ptrace(2) call takes effect and the PTRACE_POKEUSR request
addressing FPC_CSR where no masking of read-only FCSR bits is done.

Remove the FCSR clearing from FP context initialisation then and unify
PTRACE_POKEUSR/FPC_CSR and PTRACE_SETFPREGS handling, by factoring out
code from `ptrace_setfpregs' and calling it from both places.

This mostly matters to soft float configurations where the emulator can
be switched this way to a mode which should not be accessible and cannot
be set with the CTC1 instruction.  With hard float configurations any
effect is transient anyway as read-only bits will retain their values at
the time the FP context is restored.

Signed-off-by: Maciej W. Rozycki 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13239/
Signed-off-by: Ralf Baechle 
Signed-off-by: Greg Kroah-Hartman

MIPS: ptrace: Fix FP context restoration FCSR regression

2016-06-08T01:14:31+00:00

commit 4249548454f7ba4581aeee26bd83f42b48a14d15 upstream.

Fix a floating-point context restoration regression introduced with
commit 9b26616c8d9d ("MIPS: Respect the ISA level in FCSR handling")
that causes a Floating Point exception and consequently a kernel oops
with hard float configurations when one or more FCSR Enable and their
corresponding Cause bits are set both at a time via a ptrace(2) call.

To do so reinstate Cause bit masking originally introduced with commit
b1442d39fac2 ("MIPS: Prevent user from setting FCSR cause bits") to
address this exact problem and then inadvertently removed from the
PTRACE_SETFPREGS request with the commit referred above.

Signed-off-by: Maciej W. Rozycki 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13238/
Signed-off-by: Ralf Baechle 
Signed-off-by: Greg Kroah-Hartman

MIPS: Disable preemption during prctl(PR_SET_FP_MODE, ...)

2016-06-08T01:14:31+00:00

commit bd239f1e1429e7781096bf3884bdb1b2b1bb4f28 upstream.

Whilst a PR_SET_FP_MODE prctl is performed there are decisions made
based upon whether the task is executing on the current CPU. This may
change if we're preempted, so disable preemption to avoid such changes
for the lifetime of the mode switch.

Signed-off-by: Paul Burton 
Fixes: 9791554b45a2 ("MIPS,prctl: add PR_[GS]ET_FP_MODE prctl options for MIPS")
Reviewed-by: Maciej W. Rozycki 
Tested-by: Aurelien Jarno 
Cc: Adam Buchbinder 
Cc: James Hogan 
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13144/
Signed-off-by: Ralf Baechle 
Signed-off-by: Greg Kroah-Hartman