linux-stable.git/arch/mips, branch v3.2.68 Linux kernel stable tree MIPS: Fix kernel lockup or crash after CPU offline/online 2015-03-06T00:39:18+00:00 Hemmo Nieminen hemmo.nieminen@iki.fi 2015-01-15T21:01:59+00:00 7829c20e43e9f915231e8b7c97aaa1acc9133126 commit c7754e75100ed5e3068ac5085747f2bfc386c8d6 upstream. As printk() invocation can cause e.g. a TLB miss, printk() cannot be called before the exception handlers have been properly initialized. This can happen e.g. when netconsole has been loaded as a kernel module and the TLB table has been cleared when a CPU was offline. Call cpu_report() in start_secondary() only after the exception handlers have been initialized to fix this. Without the patch the kernel will randomly either lockup or crash after a CPU is onlined and the console driver is a module. Signed-off-by: Hemmo Nieminen <hemmo.nieminen@iki.fi> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8953/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit c7754e75100ed5e3068ac5085747f2bfc386c8d6 upstream.

As printk() invocation can cause e.g. a TLB miss, printk() cannot be
called before the exception handlers have been properly initialized.
This can happen e.g. when netconsole has been loaded as a kernel module
and the TLB table has been cleared when a CPU was offline.

Call cpu_report() in start_secondary() only after the exception handlers
have been initialized to fix this.

Without the patch the kernel will randomly either lockup or crash
after a CPU is onlined and the console driver is a module.

Signed-off-by: Hemmo Nieminen <hemmo.nieminen@iki.fi>
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8953/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
MIPS: IRQ: Fix disable_irq on CPU IRQs 2015-03-06T00:39:17+00:00 Felix Fietkau nbd@openwrt.org 2015-01-15T18:05:28+00:00 c5780dc7c2c76e76cfc20d4b5a6bb2a4540fa92d commit a3e6c1eff54878506b2dddcc202df9cc8180facb upstream. If the irq_chip does not define .irq_disable, any call to disable_irq will defer disabling the IRQ until it fires while marked as disabled. This assumes that the handler function checks for this condition, which handle_percpu_irq does not. In this case, calling disable_irq leads to an IRQ storm, if the interrupt fires while disabled. This optimization is only useful when disabling the IRQ is slow, which is not true for the MIPS CPU IRQ. Disable this optimization by implementing .irq_disable and .irq_enable Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8949/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit a3e6c1eff54878506b2dddcc202df9cc8180facb upstream.

If the irq_chip does not define .irq_disable, any call to disable_irq
will defer disabling the IRQ until it fires while marked as disabled.
This assumes that the handler function checks for this condition, which
handle_percpu_irq does not. In this case, calling disable_irq leads to
an IRQ storm, if the interrupt fires while disabled.

This optimization is only useful when disabling the IRQ is slow, which
is not true for the MIPS CPU IRQ.

Disable this optimization by implementing .irq_disable and .irq_enable

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8949/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
vm: add VM_FAULT_SIGSEGV handling support 2015-02-20T00:49:40+00:00 Linus Torvalds torvalds@linux-foundation.org 2015-01-29T18:51:32+00:00 219a047eb9a3cde86b5a341f9f8d4f6cf7e8cd56 commit 33692f27597fcab536d7cbbcc8f52905133e4aa7 upstream. The core VM already knows about VM_FAULT_SIGBUS, but cannot return a "you should SIGSEGV" error, because the SIGSEGV case was generally handled by the caller - usually the architecture fault handler. That results in lots of duplication - all the architecture fault handlers end up doing very similar "look up vma, check permissions, do retries etc" - but it generally works. However, there are cases where the VM actually wants to SIGSEGV, and applications _expect_ SIGSEGV. In particular, when accessing the stack guard page, libsigsegv expects a SIGSEGV. And it usually got one, because the stack growth is handled by that duplicated architecture fault handler. However, when the generic VM layer started propagating the error return from the stack expansion in commit fee7e49d4514 ("mm: propagate error from stack expansion even for guard page"), that now exposed the existing VM_FAULT_SIGBUS result to user space. And user space really expected SIGSEGV, not SIGBUS. To fix that case, we need to add a VM_FAULT_SIGSEGV, and teach all those duplicate architecture fault handlers about it. They all already have the code to handle SIGSEGV, so it's about just tying that new return value to the existing code, but it's all a bit annoying. This is the mindless minimal patch to do this. A more extensive patch would be to try to gather up the mostly shared fault handling logic into one generic helper routine, and long-term we really should do that cleanup. Just from this patch, you can generally see that most architectures just copied (directly or indirectly) the old x86 way of doing things, but in the meantime that original x86 model has been improved to hold the VM semaphore for shorter times etc and to handle VM_FAULT_RETRY and other "newer" things, so it would be a good idea to bring all those improvements to the generic case and teach other architectures about them too. Reported-and-tested-by: Takashi Iwai <tiwai@suse.de> Tested-by: Jan Engelhardt <jengelh@inai.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> # "s390 still compiles and boots" Cc: linux-arch@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> [bwh: Backported to 3.2: - Adjust filenames, context - Drop arc, metag, nios2 and lustre changes - For sh, patch both 32-bit and 64-bit implementations to use goto bad_area - For s390, pass int_code and trans_exc_code as arguments to do_no_context() and do_sigsegv()] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 33692f27597fcab536d7cbbcc8f52905133e4aa7 upstream.

The core VM already knows about VM_FAULT_SIGBUS, but cannot return a
"you should SIGSEGV" error, because the SIGSEGV case was generally
handled by the caller - usually the architecture fault handler.

That results in lots of duplication - all the architecture fault
handlers end up doing very similar "look up vma, check permissions, do
retries etc" - but it generally works.  However, there are cases where
the VM actually wants to SIGSEGV, and applications _expect_ SIGSEGV.

In particular, when accessing the stack guard page, libsigsegv expects a
SIGSEGV.  And it usually got one, because the stack growth is handled by
that duplicated architecture fault handler.

However, when the generic VM layer started propagating the error return
from the stack expansion in commit fee7e49d4514 ("mm: propagate error
from stack expansion even for guard page"), that now exposed the
existing VM_FAULT_SIGBUS result to user space.  And user space really
expected SIGSEGV, not SIGBUS.

To fix that case, we need to add a VM_FAULT_SIGSEGV, and teach all those
duplicate architecture fault handlers about it.  They all already have
the code to handle SIGSEGV, so it's about just tying that new return
value to the existing code, but it's all a bit annoying.

This is the mindless minimal patch to do this.  A more extensive patch
would be to try to gather up the mostly shared fault handling logic into
one generic helper routine, and long-term we really should do that
cleanup.

Just from this patch, you can generally see that most architectures just
copied (directly or indirectly) the old x86 way of doing things, but in
the meantime that original x86 model has been improved to hold the VM
semaphore for shorter times etc and to handle VM_FAULT_RETRY and other
"newer" things, so it would be a good idea to bring all those
improvements to the generic case and teach other architectures about
them too.

Reported-and-tested-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Jan Engelhardt <jengelh@inai.de>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> # "s390 still compiles and boots"
Cc: linux-arch@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[bwh: Backported to 3.2:
 - Adjust filenames, context
 - Drop arc, metag, nios2 and lustre changes
 - For sh, patch both 32-bit and 64-bit implementations to use goto bad_area
 - For s390, pass int_code and trans_exc_code as arguments to do_no_context()
   and do_sigsegv()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
MIPS: Loongson: Make platform serial setup always built-in. 2014-12-14T16:24:00+00:00 Aaro Koskinen aaro.koskinen@iki.fi 2014-11-19T23:05:38+00:00 4d7270bcf1996b5a1e19b82f9575df7f9a603582 commit 26927f76499849e095714452b8a4e09350f6a3b9 upstream. If SERIAL_8250 is compiled as a module, the platform specific setup for Loongson will be a module too, and it will not work very well. At least on Loongson 3 it will trigger a build failure, since loongson_sysconf is not exported to modules. Fix by making the platform specific serial code always built-in. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Reported-by: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: Huacai Chen <chenhc@lemote.com> Cc: Markos Chandras <Markos.Chandras@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/8533/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 26927f76499849e095714452b8a4e09350f6a3b9 upstream.

If SERIAL_8250 is compiled as a module, the platform specific setup
for Loongson will be a module too, and it will not work very well.
At least on Loongson 3 it will trigger a build failure,
since loongson_sysconf is not exported to modules.

Fix by making the platform specific serial code always built-in.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reported-by: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Markos Chandras <Markos.Chandras@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/8533/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
MIPS: oprofile: Fix backtrace on 64-bit kernel 2014-12-14T16:23:58+00:00 Aaro Koskinen aaro.koskinen@nsn.com 2014-10-17T15:10:24+00:00 8d3e0ea150d43b9085020b6cd72519262503f7c9 commit bbaf113a481b6ce32444c125807ad3618643ce57 upstream. Fix incorrect cast that always results in wrong address for the new frame on 64-bit kernels. Signed-off-by: Aaro Koskinen <aaro.koskinen@nsn.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8110/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit bbaf113a481b6ce32444c125807ad3618643ce57 upstream.

Fix incorrect cast that always results in wrong address for the new
frame on 64-bit kernels.

Signed-off-by: Aaro Koskinen <aaro.koskinen@nsn.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8110/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
MIPS: ftrace: Fix a microMIPS build problem 2014-12-14T16:23:51+00:00 Markos Chandras markos.chandras@imgtec.com 2014-10-20T08:39:31+00:00 55245a00f8bda64f93b4a0d751dc4cb7362b5d46 commit aedd153f5bb5b1f1d6d9142014f521ae2ec294cc upstream. Code before the .fixup section needs to have the .insn directive. This has no side effects on MIPS32/64 but it affects the way microMIPS loads the address for the return label. Fixes the following build problem: mips-linux-gnu-ld: arch/mips/built-in.o: .fixup+0x4a0: Unsupported jump between ISA modes; consider recompiling with interlinking enabled. mips-linux-gnu-ld: final link failed: Bad value Makefile:819: recipe for target 'vmlinux' failed The fix is similar to 1658f914ff91c3bf ("MIPS: microMIPS: Disable LL/SC and fix linker bug.") Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8117/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit aedd153f5bb5b1f1d6d9142014f521ae2ec294cc upstream.

Code before the .fixup section needs to have the .insn directive.
This has no side effects on MIPS32/64 but it affects the way microMIPS
loads the address for the return label.

Fixes the following build problem:
mips-linux-gnu-ld: arch/mips/built-in.o: .fixup+0x4a0: Unsupported jump between
ISA modes; consider recompiling with interlinking enabled.
mips-linux-gnu-ld: final link failed: Bad value
Makefile:819: recipe for target 'vmlinux' failed

The fix is similar to 1658f914ff91c3bf ("MIPS: microMIPS:
Disable LL/SC and fix linker bug.")

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8117/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
MIPS: Fix forgotten preempt_enable() when CPU has inclusive pcaches 2014-11-05T20:27:46+00:00 Yoichi Yuasa yuasa@linux-mips.org 2013-10-02T06:03:03+00:00 d521f4ba086d707a6e861d46dff2b26db4f549b5 commit 5596b0b245fb9d2cefb5023b11061050351c1398 upstream. [ 1.904000] BUG: scheduling while atomic: swapper/1/0x00000002 [ 1.908000] Modules linked in: [ 1.916000] CPU: 0 PID: 1 Comm: swapper Not tainted 3.12.0-rc2-lemote-los.git-5318619-dirty #1 [ 1.920000] Stack : 0000000031aac000 ffffffff810d0000 0000000000000052 ffffffff802730a4 0000000000000000 0000000000000001 ffffffff810cdf90 ffffffff810d0000 ffffffff8068b968 ffffffff806f5537 ffffffff810cdf90 980000009f0782e8 0000000000000001 ffffffff80720000 ffffffff806b0000 980000009f078000 980000009f290000 ffffffff805f312c 980000009f05b5d8 ffffffff80233518 980000009f05b5e8 ffffffff80274b7c 980000009f078000 ffffffff8068b968 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 980000009f05b520 0000000000000000 ffffffff805f2f6c 0000000000000000 ffffffff80700000 ffffffff80700000 ffffffff806fc758 ffffffff80700000 ffffffff8020be98 ffffffff806fceb0 ffffffff805f2f6c ... [ 2.028000] Call Trace: [ 2.032000] [<ffffffff8020be98>] show_stack+0x80/0x98 [ 2.036000] [<ffffffff805f2f6c>] __schedule_bug+0x44/0x6c [ 2.040000] [<ffffffff805fac58>] __schedule+0x518/0x5b0 [ 2.044000] [<ffffffff805f8a58>] schedule_timeout+0x128/0x1f0 [ 2.048000] [<ffffffff80240314>] msleep+0x3c/0x60 [ 2.052000] [<ffffffff80495400>] do_probe+0x238/0x3a8 [ 2.056000] [<ffffffff804958b0>] ide_probe_port+0x340/0x7e8 [ 2.060000] [<ffffffff80496028>] ide_host_register+0x2d0/0x7a8 [ 2.064000] [<ffffffff8049c65c>] ide_pci_init_two+0x4e4/0x790 [ 2.068000] [<ffffffff8049f9b8>] amd74xx_probe+0x148/0x2c8 [ 2.072000] [<ffffffff803f571c>] pci_device_probe+0xc4/0x130 [ 2.076000] [<ffffffff80478f60>] driver_probe_device+0x98/0x270 [ 2.080000] [<ffffffff80479298>] __driver_attach+0xe0/0xe8 [ 2.084000] [<ffffffff80476ab0>] bus_for_each_dev+0x78/0xe0 [ 2.088000] [<ffffffff80478468>] bus_add_driver+0x230/0x310 [ 2.092000] [<ffffffff80479b44>] driver_register+0x84/0x158 [ 2.096000] [<ffffffff80200504>] do_one_initcall+0x104/0x160 Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: linux-mips@linux-mips.org Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org> Patchwork: https://patchwork.linux-mips.org/patch/5941/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 5596b0b245fb9d2cefb5023b11061050351c1398 upstream.

[    1.904000] BUG: scheduling while atomic: swapper/1/0x00000002
[    1.908000] Modules linked in:
[    1.916000] CPU: 0 PID: 1 Comm: swapper Not tainted 3.12.0-rc2-lemote-los.git-5318619-dirty #1
[    1.920000] Stack : 0000000031aac000 ffffffff810d0000 0000000000000052 ffffffff802730a4
          0000000000000000 0000000000000001 ffffffff810cdf90 ffffffff810d0000
          ffffffff8068b968 ffffffff806f5537 ffffffff810cdf90 980000009f0782e8
          0000000000000001 ffffffff80720000 ffffffff806b0000 980000009f078000
          980000009f290000 ffffffff805f312c 980000009f05b5d8 ffffffff80233518
          980000009f05b5e8 ffffffff80274b7c 980000009f078000 ffffffff8068b968
          0000000000000000 0000000000000000 0000000000000000 0000000000000000
          0000000000000000 980000009f05b520 0000000000000000 ffffffff805f2f6c
          0000000000000000 ffffffff80700000 ffffffff80700000 ffffffff806fc758
          ffffffff80700000 ffffffff8020be98 ffffffff806fceb0 ffffffff805f2f6c
          ...
[    2.028000] Call Trace:
[    2.032000] [<ffffffff8020be98>] show_stack+0x80/0x98
[    2.036000] [<ffffffff805f2f6c>] __schedule_bug+0x44/0x6c
[    2.040000] [<ffffffff805fac58>] __schedule+0x518/0x5b0
[    2.044000] [<ffffffff805f8a58>] schedule_timeout+0x128/0x1f0
[    2.048000] [<ffffffff80240314>] msleep+0x3c/0x60
[    2.052000] [<ffffffff80495400>] do_probe+0x238/0x3a8
[    2.056000] [<ffffffff804958b0>] ide_probe_port+0x340/0x7e8
[    2.060000] [<ffffffff80496028>] ide_host_register+0x2d0/0x7a8
[    2.064000] [<ffffffff8049c65c>] ide_pci_init_two+0x4e4/0x790
[    2.068000] [<ffffffff8049f9b8>] amd74xx_probe+0x148/0x2c8
[    2.072000] [<ffffffff803f571c>] pci_device_probe+0xc4/0x130
[    2.076000] [<ffffffff80478f60>] driver_probe_device+0x98/0x270
[    2.080000] [<ffffffff80479298>] __driver_attach+0xe0/0xe8
[    2.084000] [<ffffffff80476ab0>] bus_for_each_dev+0x78/0xe0
[    2.088000] [<ffffffff80478468>] bus_add_driver+0x230/0x310
[    2.092000] [<ffffffff80479b44>] driver_register+0x84/0x158
[    2.096000] [<ffffffff80200504>] do_one_initcall+0x104/0x160

Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: linux-mips@linux-mips.org
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Patchwork: https://patchwork.linux-mips.org/patch/5941/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
MIPS: mcount: Adjust stack pointer for static trace in MIPS32 2014-11-05T20:27:46+00:00 Markos Chandras markos.chandras@imgtec.com 2014-09-16T14:55:12+00:00 bbc3708af2adfb001b3df0e9e7479d10082772c2 commit 8a574cfa2652545eb95595d38ac2a0bb501af0ae upstream. Every mcount() call in the MIPS 32-bit kernel is done as follows: [...] move at, ra jal _mcount addiu sp, sp, -8 [...] but upon returning from the mcount() function, the stack pointer is not adjusted properly. This is explained in details in 58b69401c797 (MIPS: Function tracer: Fix broken function tracing). Commit ad8c396936e3 ("MIPS: Unbreak function tracer for 64-bit kernel.) fixed the stack manipulation for 64-bit but it didn't fix it completely for MIPS32. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7792/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 8a574cfa2652545eb95595d38ac2a0bb501af0ae upstream.

Every mcount() call in the MIPS 32-bit kernel is done as follows:

[...]
move at, ra
jal _mcount
addiu sp, sp, -8
[...]

but upon returning from the mcount() function, the stack pointer
is not adjusted properly. This is explained in details in 58b69401c797
(MIPS: Function tracer: Fix broken function tracing).

Commit ad8c396936e3 ("MIPS: Unbreak function tracer for 64-bit kernel.)
fixed the stack manipulation for 64-bit but it didn't fix it completely
for MIPS32.

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/7792/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
MIPS: ZBOOT: add missing <linux/string.h> include 2014-11-05T20:27:39+00:00 Aurelien Jarno aurelien@aurel32.net 2014-07-20T17:58:23+00:00 a7b97034f762c24849a507fda181dc47198a7f48 commit 29593fd5a8149462ed6fad0d522234facdaee6c8 upstream. Commit dc4d7b37 (MIPS: ZBOOT: gather string functions into string.c) moved the string related functions into a separate file, which might cause the following build error, depending on the configuration: | CC arch/mips/boot/compressed/decompress.o | In file included from linux/arch/mips/boot/compressed/../../../../lib/decompress_unxz.c:234:0, | from linux/arch/mips/boot/compressed/decompress.c:67: | linux/arch/mips/boot/compressed/../../../../lib/xz/xz_dec_stream.c: In function 'fill_temp': | linux/arch/mips/boot/compressed/../../../../lib/xz/xz_dec_stream.c:162:2: error: implicit declaration of function 'memcpy' [-Werror=implicit-function-declaration] | cc1: some warnings being treated as errors | linux/scripts/Makefile.build:308: recipe for target 'arch/mips/boot/compressed/decompress.o' failed | make[6]: *** [arch/mips/boot/compressed/decompress.o] Error 1 | linux/arch/mips/Makefile:308: recipe for target 'vmlinuz' failed It does not fail with the standard configuration, as when CONFIG_DYNAMIC_DEBUG is not enabled <linux/string.h> gets included in include/linux/dynamic_debug.h. There might be other ways for it to get indirectly included. We can't add the include directly in xz_dec_stream.c as some architectures might want to use a different version for the boot/ directory (see for example arch/x86/boot/string.h). Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7420/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 29593fd5a8149462ed6fad0d522234facdaee6c8 upstream.

Commit dc4d7b37 (MIPS: ZBOOT: gather string functions into string.c)
moved the string related functions into a separate file, which might
cause the following build error, depending on the configuration:

| CC      arch/mips/boot/compressed/decompress.o
| In file included from linux/arch/mips/boot/compressed/../../../../lib/decompress_unxz.c:234:0,
|                  from linux/arch/mips/boot/compressed/decompress.c:67:
| linux/arch/mips/boot/compressed/../../../../lib/xz/xz_dec_stream.c: In function 'fill_temp':
| linux/arch/mips/boot/compressed/../../../../lib/xz/xz_dec_stream.c:162:2: error: implicit declaration of function 'memcpy' [-Werror=implicit-function-declaration]
| cc1: some warnings being treated as errors
| linux/scripts/Makefile.build:308: recipe for target 'arch/mips/boot/compressed/decompress.o' failed
| make[6]: *** [arch/mips/boot/compressed/decompress.o] Error 1
| linux/arch/mips/Makefile:308: recipe for target 'vmlinuz' failed

It does not fail with the standard configuration, as when
CONFIG_DYNAMIC_DEBUG is not enabled <linux/string.h> gets included in
include/linux/dynamic_debug.h. There might be other ways for it to
get indirectly included.

We can't add the include directly in xz_dec_stream.c as some
architectures might want to use a different version for the boot/
directory (see for example arch/x86/boot/string.h).

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/7420/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
MIPS: Fix accessing to per-cpu data when flushing the cache 2014-09-13T22:41:48+00:00 Ralf Baechle ralf@linux-mips.org 2013-09-17T10:44:31+00:00 2ce277620ead681c615c46b89de352893f3d3dd5 commit ff522058bd717506b2fa066fa564657f2b86477e upstream. This fixes the following issue BUG: using smp_processor_id() in preemptible [00000000] code: kjournald/1761 caller is blast_dcache32+0x30/0x254 Call Trace: [<8047f02c>] dump_stack+0x8/0x34 [<802e7e40>] debug_smp_processor_id+0xe0/0xf0 [<80114d94>] blast_dcache32+0x30/0x254 [<80118484>] r4k_dma_cache_wback_inv+0x200/0x288 [<80110ff0>] mips_dma_map_sg+0x108/0x180 [<80355098>] ide_dma_prepare+0xf0/0x1b8 [<8034eaa4>] do_rw_taskfile+0x1e8/0x33c [<8035951c>] ide_do_rw_disk+0x298/0x3e4 [<8034a3c4>] do_ide_request+0x2e0/0x704 [<802bb0dc>] __blk_run_queue+0x44/0x64 [<802be000>] queue_unplugged.isra.36+0x1c/0x54 [<802beb94>] blk_flush_plug_list+0x18c/0x24c [<802bec6c>] blk_finish_plug+0x18/0x48 [<8026554c>] journal_commit_transaction+0x3b8/0x151c [<80269648>] kjournald+0xec/0x238 [<8014ac00>] kthread+0xb8/0xc0 [<8010268c>] ret_from_kernel_thread+0x14/0x1c Caches in most systems are identical - but not always, so we can't avoid the use of smp_call_function() by just looking at the boot CPU's data, have to fiddle with preemption instead. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5835 Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit ff522058bd717506b2fa066fa564657f2b86477e upstream.

This fixes the following issue

BUG: using smp_processor_id() in preemptible [00000000] code: kjournald/1761
caller is blast_dcache32+0x30/0x254
Call Trace:
[<8047f02c>] dump_stack+0x8/0x34
[<802e7e40>] debug_smp_processor_id+0xe0/0xf0
[<80114d94>] blast_dcache32+0x30/0x254
[<80118484>] r4k_dma_cache_wback_inv+0x200/0x288
[<80110ff0>] mips_dma_map_sg+0x108/0x180
[<80355098>] ide_dma_prepare+0xf0/0x1b8
[<8034eaa4>] do_rw_taskfile+0x1e8/0x33c
[<8035951c>] ide_do_rw_disk+0x298/0x3e4
[<8034a3c4>] do_ide_request+0x2e0/0x704
[<802bb0dc>] __blk_run_queue+0x44/0x64
[<802be000>] queue_unplugged.isra.36+0x1c/0x54
[<802beb94>] blk_flush_plug_list+0x18c/0x24c
[<802bec6c>] blk_finish_plug+0x18/0x48
[<8026554c>] journal_commit_transaction+0x3b8/0x151c
[<80269648>] kjournald+0xec/0x238
[<8014ac00>] kthread+0xb8/0xc0
[<8010268c>] ret_from_kernel_thread+0x14/0x1c

Caches in most systems are identical - but not always, so we can't avoid
the use of smp_call_function() by just looking at the boot CPU's data,
have to fiddle with preemption instead.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5835
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>