linux-stable.git/arch/mips, branch v3.2.64

MIPS: Fix forgotten preempt_enable() when CPU has inclusive pcaches

2014-11-05T20:27:46+00:00

commit 5596b0b245fb9d2cefb5023b11061050351c1398 upstream.

[    1.904000] BUG: scheduling while atomic: swapper/1/0x00000002
[    1.908000] Modules linked in:
[    1.916000] CPU: 0 PID: 1 Comm: swapper Not tainted 3.12.0-rc2-lemote-los.git-5318619-dirty #1
[    1.920000] Stack : 0000000031aac000 ffffffff810d0000 0000000000000052 ffffffff802730a4
          0000000000000000 0000000000000001 ffffffff810cdf90 ffffffff810d0000
          ffffffff8068b968 ffffffff806f5537 ffffffff810cdf90 980000009f0782e8
          0000000000000001 ffffffff80720000 ffffffff806b0000 980000009f078000
          980000009f290000 ffffffff805f312c 980000009f05b5d8 ffffffff80233518
          980000009f05b5e8 ffffffff80274b7c 980000009f078000 ffffffff8068b968
          0000000000000000 0000000000000000 0000000000000000 0000000000000000
          0000000000000000 980000009f05b520 0000000000000000 ffffffff805f2f6c
          0000000000000000 ffffffff80700000 ffffffff80700000 ffffffff806fc758
          ffffffff80700000 ffffffff8020be98 ffffffff806fceb0 ffffffff805f2f6c
          ...
[    2.028000] Call Trace:
[    2.032000] [] show_stack+0x80/0x98
[    2.036000] [] __schedule_bug+0x44/0x6c
[    2.040000] [] __schedule+0x518/0x5b0
[    2.044000] [] schedule_timeout+0x128/0x1f0
[    2.048000] [] msleep+0x3c/0x60
[    2.052000] [] do_probe+0x238/0x3a8
[    2.056000] [] ide_probe_port+0x340/0x7e8
[    2.060000] [] ide_host_register+0x2d0/0x7a8
[    2.064000] [] ide_pci_init_two+0x4e4/0x790
[    2.068000] [] amd74xx_probe+0x148/0x2c8
[    2.072000] [] pci_device_probe+0xc4/0x130
[    2.076000] [] driver_probe_device+0x98/0x270
[    2.080000] [] __driver_attach+0xe0/0xe8
[    2.084000] [] bus_for_each_dev+0x78/0xe0
[    2.088000] [] bus_add_driver+0x230/0x310
[    2.092000] [] driver_register+0x84/0x158
[    2.096000] [] do_one_initcall+0x104/0x160

Signed-off-by: Yoichi Yuasa 
Reported-by: Aaro Koskinen 
Tested-by: Aaro Koskinen 
Cc: linux-mips@linux-mips.org
Cc: Linux Kernel Mailing List 
Patchwork: https://patchwork.linux-mips.org/patch/5941/
Signed-off-by: Ralf Baechle 
Signed-off-by: Ben Hutchings

MIPS: mcount: Adjust stack pointer for static trace in MIPS32

2014-11-05T20:27:46+00:00

commit 8a574cfa2652545eb95595d38ac2a0bb501af0ae upstream.

Every mcount() call in the MIPS 32-bit kernel is done as follows:

[...]
move at, ra
jal _mcount
addiu sp, sp, -8
[...]

but upon returning from the mcount() function, the stack pointer
is not adjusted properly. This is explained in details in 58b69401c797
(MIPS: Function tracer: Fix broken function tracing).

Commit ad8c396936e3 ("MIPS: Unbreak function tracer for 64-bit kernel.)
fixed the stack manipulation for 64-bit but it didn't fix it completely
for MIPS32.

Signed-off-by: Markos Chandras 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/7792/
Signed-off-by: Ralf Baechle 
Signed-off-by: Ben Hutchings

MIPS: ZBOOT: add missing include

2014-11-05T20:27:39+00:00

commit 29593fd5a8149462ed6fad0d522234facdaee6c8 upstream.

Commit dc4d7b37 (MIPS: ZBOOT: gather string functions into string.c)
moved the string related functions into a separate file, which might
cause the following build error, depending on the configuration:

| CC      arch/mips/boot/compressed/decompress.o
| In file included from linux/arch/mips/boot/compressed/../../../../lib/decompress_unxz.c:234:0,
|                  from linux/arch/mips/boot/compressed/decompress.c:67:
| linux/arch/mips/boot/compressed/../../../../lib/xz/xz_dec_stream.c: In function 'fill_temp':
| linux/arch/mips/boot/compressed/../../../../lib/xz/xz_dec_stream.c:162:2: error: implicit declaration of function 'memcpy' [-Werror=implicit-function-declaration]
| cc1: some warnings being treated as errors
| linux/scripts/Makefile.build:308: recipe for target 'arch/mips/boot/compressed/decompress.o' failed
| make[6]: *** [arch/mips/boot/compressed/decompress.o] Error 1
| linux/arch/mips/Makefile:308: recipe for target 'vmlinuz' failed

It does not fail with the standard configuration, as when
CONFIG_DYNAMIC_DEBUG is not enabled  gets included in
include/linux/dynamic_debug.h. There might be other ways for it to
get indirectly included.

We can't add the include directly in xz_dec_stream.c as some
architectures might want to use a different version for the boot/
directory (see for example arch/x86/boot/string.h).

Signed-off-by: Aurelien Jarno 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/7420/
Signed-off-by: Ralf Baechle 
Signed-off-by: Ben Hutchings

MIPS: Fix accessing to per-cpu data when flushing the cache

2014-09-13T22:41:48+00:00

commit ff522058bd717506b2fa066fa564657f2b86477e upstream.

This fixes the following issue

BUG: using smp_processor_id() in preemptible [00000000] code: kjournald/1761
caller is blast_dcache32+0x30/0x254
Call Trace:
[<8047f02c>] dump_stack+0x8/0x34
[<802e7e40>] debug_smp_processor_id+0xe0/0xf0
[<80114d94>] blast_dcache32+0x30/0x254
[<80118484>] r4k_dma_cache_wback_inv+0x200/0x288
[<80110ff0>] mips_dma_map_sg+0x108/0x180
[<80355098>] ide_dma_prepare+0xf0/0x1b8
[<8034eaa4>] do_rw_taskfile+0x1e8/0x33c
[<8035951c>] ide_do_rw_disk+0x298/0x3e4
[<8034a3c4>] do_ide_request+0x2e0/0x704
[<802bb0dc>] __blk_run_queue+0x44/0x64
[<802be000>] queue_unplugged.isra.36+0x1c/0x54
[<802beb94>] blk_flush_plug_list+0x18c/0x24c
[<802bec6c>] blk_finish_plug+0x18/0x48
[<8026554c>] journal_commit_transaction+0x3b8/0x151c
[<80269648>] kjournald+0xec/0x238
[<8014ac00>] kthread+0xb8/0xc0
[<8010268c>] ret_from_kernel_thread+0x14/0x1c

Caches in most systems are identical - but not always, so we can't avoid
the use of smp_call_function() by just looking at the boot CPU's data,
have to fiddle with preemption instead.

Signed-off-by: Ralf Baechle 
Cc: Markos Chandras 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5835
Signed-off-by: Ben Hutchings

MIPS: perf: Fix build error caused by unused counters_per_cpu_to_total()

2014-09-13T22:41:48+00:00

commit 6c37c9580409af7dc664bb6af0a85d540d63aeea upstream.

cc1: warnings being treated as errors
arch/mips/kernel/perf_event_mipsxx.c:166: error: 'counters_per_cpu_to_total' defined but not used
make[2]: *** [arch/mips/kernel/perf_event_mipsxx.o] Error 1
make[2]: *** Waiting for unfinished jobs....

It was first introduced by 82091564cfd7ab8def42777a9c662dbf655c5d25 [MIPS:
perf: Add support for 64-bit perf counters.] in 3.2.

Signed-off-by: Florian Fainelli 
Cc: linux-mips@linux-mips.org
Cc: david.daney@cavium.com
Patchwork: https://patchwork.linux-mips.org/patch/3357/
Signed-off-by: Ralf Baechle 
Signed-off-by: Ben Hutchings

MIPS: OCTEON: make get_system_type() thread-safe

2014-09-13T22:41:46+00:00

commit 608308682addfdc7b8e2aee88f0e028331d88e4d upstream.

get_system_type() is not thread-safe on OCTEON. It uses static data,
also more dangerous issue is that it's calling cvmx_fuse_read_byte()
every time without any synchronization. Currently it's possible to get
processes stuck looping forever in kernel simply by launching multiple
readers of /proc/cpuinfo:

	(while true; do cat /proc/cpuinfo > /dev/null; done) &
	(while true; do cat /proc/cpuinfo > /dev/null; done) &
	...

Fix by initializing the system type string only once during the early
boot.

Signed-off-by: Aaro Koskinen 
Reviewed-by: Markos Chandras 
Patchwork: http://patchwork.linux-mips.org/patch/7437/
Signed-off-by: James Hogan 
Signed-off-by: Ben Hutchings

MIPS: GIC: Prevent array overrun

2014-09-13T22:41:41+00:00

commit ffc8415afab20bd97754efae6aad1f67b531132b upstream.

A GIC interrupt which is declared as having a GIC_MAP_TO_NMI_MSK
mapping causes the cpu parameter to gic_setup_intr() to be increased
to 32, causing memory corruption when pcpu_masks[] is written to again
later in the function.

Signed-off-by: Jeffrey Deans 
Signed-off-by: Markos Chandras 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/7375/
Signed-off-by: Ralf Baechle 
Signed-off-by: Ben Hutchings

MIPS: Prevent user from setting FCSR cause bits

2014-09-13T22:41:40+00:00

commit b1442d39fac2fcfbe6a4814979020e993ca59c9e upstream.

If one or more matching FCSR cause & enable bits are set in saved thread
context then when that context is restored the kernel will take an FP
exception. This is of course undesirable and considered an oops, leading
to the kernel writing a backtrace to the console and potentially
rebooting depending upon the configuration. Thus the kernel avoids this
situation by clearing the cause bits of the FCSR register when handling
FP exceptions and after emulating FP instructions.

However the kernel does not prevent userland from setting arbitrary FCSR
cause & enable bits via ptrace, using either the PTRACE_POKEUSR or
PTRACE_SETFPREGS requests. This means userland can trivially cause the
kernel to oops on any system with an FPU. Prevent this from happening
by clearing the cause bits when writing to the saved FCSR context via
ptrace.

This problem appears to exist at least back to the beginning of the git
era in the PTRACE_POKEUSR case.

Signed-off-by: Paul Burton 
Cc: linux-mips@linux-mips.org
Cc: Paul Burton 
Patchwork: https://patchwork.linux-mips.org/patch/7438/
Signed-off-by: Ralf Baechle 
Signed-off-by: Ben Hutchings

MIPS: tlbex: Fix a missing statement for HUGETLB

2014-09-13T22:41:40+00:00

commit 8393c524a25609a30129e4a8975cf3b91f6c16a5 upstream.

In commit 2c8c53e28f1 (MIPS: Optimize TLB handlers for Octeon CPUs)
build_r4000_tlb_refill_handler() is modified. But it doesn't compatible
with the original code in HUGETLB case. Because there is a copy & paste
error and one line of code is missing. It is very easy to produce a bug
with LTP's hugemmap05 test.

Signed-off-by: Huacai Chen 
Signed-off-by: Binbin Zhou 
Cc: John Crispin 
Cc: Steven J. Hill 
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang 
Cc: Zhangjin Wu 
Patchwork: https://patchwork.linux-mips.org/patch/7496/
Signed-off-by: Ralf Baechle 
Signed-off-by: Ben Hutchings

MIPS: asm: thread_info: Add _TIF_SECCOMP flag

2014-07-11T12:33:56+00:00

commit 137f7df8cead00688524c82360930845396b8a21 upstream.

Add _TIF_SECCOMP flag to _TIF_WORK_SYSCALL_ENTRY to indicate
that the system call needs to be checked against a seccomp filter.

Signed-off-by: Markos Chandras 
Reviewed-by: Paul Burton 
Reviewed-by: James Hogan 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/6405/
Signed-off-by: Ralf Baechle 
[bwh: Backported to 3.2: various other flags are not included in
 _TIF_WORK_SYSCALL_ENTRY]
Signed-off-by: Ben Hutchings