linux-stable.git/arch/mips, branch linux-6.11.y Linux kernel stable tree of/fdt: add dt_phys arg to early_init_dt_scan and early_init_dt_verify 2024-12-05T12:53:03+00:00 Usama Arif usamaarif642@gmail.com 2024-10-23T17:14:26+00:00 f8528655791598772089845b949537d5cfcd34d3 [ Upstream commit b2473a359763e27567993e7d8f37de82f57a0829 ] __pa() is only intended to be used for linear map addresses and using it for initial_boot_params which is in fixmap for arm64 will give an incorrect value. Hence save the physical address when it is known at boot time when calling early_init_dt_scan for arm64 and use it at kexec time instead of converting the virtual address using __pa(). Note that arm64 doesn't need the FDT region reserved in the DT as the kernel explicitly reserves the passed in FDT. Therefore, only a debug warning is fixed with this change. Reported-by: Breno Leitao <leitao@debian.org> Suggested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Usama Arif <usamaarif642@gmail.com> Fixes: ac10be5cdbfa ("arm64: Use common of_kexec_alloc_and_setup_fdt()") Link: https://lore.kernel.org/r/20241023171426.452688-1-usamaarif642@gmail.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit b2473a359763e27567993e7d8f37de82f57a0829 ]

 __pa() is only intended to be used for linear map addresses and using
it for initial_boot_params which is in fixmap for arm64 will give an
incorrect value. Hence save the physical address when it is known at
boot time when calling early_init_dt_scan for arm64 and use it at kexec
time instead of converting the virtual address using __pa().

Note that arm64 doesn't need the FDT region reserved in the DT as the
kernel explicitly reserves the passed in FDT. Therefore, only a debug
warning is fixed with this change.

Reported-by: Breno Leitao <leitao@debian.org>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Usama Arif <usamaarif642@gmail.com>
Fixes: ac10be5cdbfa ("arm64: Use common of_kexec_alloc_and_setup_fdt()")
Link: https://lore.kernel.org/r/20241023171426.452688-1-usamaarif642@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
mips: asm: fix warning when disabling MIPS_FP_SUPPORT 2024-12-05T12:52:45+00:00 Jonas Gorski jonas.gorski@gmail.com 2024-10-12T10:12:14+00:00 916d8c0b579f6e78d568b7c8a83ca761de45b11a [ Upstream commit da09935975c8f8c90d6f57be2422dee5557206cd ] When MIPS_FP_SUPPORT is disabled, __sanitize_fcr31() is defined as nothing, which triggers a gcc warning: In file included from kernel/sched/core.c:79: kernel/sched/core.c: In function 'context_switch': ./arch/mips/include/asm/switch_to.h:114:39: warning: suggest braces around empty body in an 'if' statement [-Wempty-body] 114 | __sanitize_fcr31(next); \ | ^ kernel/sched/core.c:5316:9: note: in expansion of macro 'switch_to' 5316 | switch_to(prev, next, prev); | ^~~~~~~~~ Fix this by providing an empty body for __sanitize_fcr31() like one is defined for __mips_mt_fpaff_switch_to(). Fixes: 36a498035bd2 ("MIPS: Avoid FCSR sanitization when CONFIG_MIPS_FP_SUPPORT=n") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit da09935975c8f8c90d6f57be2422dee5557206cd ]

When MIPS_FP_SUPPORT is disabled, __sanitize_fcr31() is defined as
nothing, which triggers a gcc warning:

    In file included from kernel/sched/core.c:79:
    kernel/sched/core.c: In function 'context_switch':
    ./arch/mips/include/asm/switch_to.h:114:39: warning: suggest braces around empty body in an 'if' statement [-Wempty-body]
      114 |                 __sanitize_fcr31(next);                                 \
          |                                       ^
    kernel/sched/core.c:5316:9: note: in expansion of macro 'switch_to'
     5316 |         switch_to(prev, next, prev);
          |         ^~~~~~~~~

Fix this by providing an empty body for __sanitize_fcr31() like one is
defined for __mips_mt_fpaff_switch_to().

Fixes: 36a498035bd2 ("MIPS: Avoid FCSR sanitization when CONFIG_MIPS_FP_SUPPORT=n")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
crash, powerpc: default to CRASH_DUMP=n on PPC_BOOK3S_32 2024-11-22T14:39:51+00:00 Dave Vasilevsky dave@vasilevsky.ca 2024-09-17T16:37:20+00:00 7739f283c5ddcd6a12b699771b3fae48545ae2e3 commit 31daa34315d45d3fe77f2158d889d523d78852ea upstream. Fixes boot failures on 6.9 on PPC_BOOK3S_32 machines using Open Firmware. On these machines, the kernel refuses to boot from non-zero PHYSICAL_START, which occurs when CRASH_DUMP is on. Since most PPC_BOOK3S_32 machines boot via Open Firmware, it should default to off for them. Users booting via some other mechanism can still turn it on explicitly. Does not change the default on any other architectures for the time being. Link: https://lkml.kernel.org/r/20240917163720.1644584-1-dave@vasilevsky.ca Fixes: 75bc255a7444 ("crash: clean up kdump related config items") Signed-off-by: Dave Vasilevsky <dave@vasilevsky.ca> Reported-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de> Closes: https://lists.debian.org/debian-powerpc/2024/07/msg00001.html Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Acked-by: Baoquan He <bhe@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Reimar Döffinger <Reimar.Doeffinger@gmx.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 31daa34315d45d3fe77f2158d889d523d78852ea upstream.

Fixes boot failures on 6.9 on PPC_BOOK3S_32 machines using Open Firmware.
On these machines, the kernel refuses to boot from non-zero
PHYSICAL_START, which occurs when CRASH_DUMP is on.

Since most PPC_BOOK3S_32 machines boot via Open Firmware, it should
default to off for them.  Users booting via some other mechanism can still
turn it on explicitly.

Does not change the default on any other architectures for the
time being.

Link: https://lkml.kernel.org/r/20240917163720.1644584-1-dave@vasilevsky.ca
Fixes: 75bc255a7444 ("crash: clean up kdump related config items")
Signed-off-by: Dave Vasilevsky <dave@vasilevsky.ca>
Reported-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Closes: https://lists.debian.org/debian-powerpc/2024/07/msg00001.html
Acked-by: Michael Ellerman <mpe@ellerman.id.au>	[powerpc]
Acked-by: Baoquan He <bhe@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
MIPS: export __cmpxchg_small() 2024-11-08T15:31:04+00:00 David Sterba dsterba@suse.com 2024-10-22T14:21:05+00:00 5b3a16ebd5a56cc2f6e9ede2f050761103347e0d commit 90a88784cdb7757feb8dd520255e6cb861f30943 upstream. Export the symbol __cmpxchg_small() for btrfs.ko that uses it to store blk_status_t, which is u8. Reported by LKP: >> ERROR: modpost: "__cmpxchg_small" [fs/btrfs/btrfs.ko] undefined! Patch using the cmpxchg() https://lore.kernel.org/linux-btrfs/1d4f72f7fee285b2ddf4bf62b0ac0fd89def5417.1728575379.git.naohiro.aota@wdc.com/ Link: https://lore.kernel.org/all/20241016134919.GO1609@suse.cz/ Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 90a88784cdb7757feb8dd520255e6cb861f30943 upstream.

Export the symbol __cmpxchg_small() for btrfs.ko that uses it to store
blk_status_t, which is u8. Reported by LKP:

>> ERROR: modpost: "__cmpxchg_small" [fs/btrfs/btrfs.ko] undefined!

Patch using the cmpxchg() https://lore.kernel.org/linux-btrfs/1d4f72f7fee285b2ddf4bf62b0ac0fd89def5417.1728575379.git.naohiro.aota@wdc.com/

Link: https://lore.kernel.org/all/20241016134919.GO1609@suse.cz/
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert "MIPS: csrc-r4k: Apply verification clocksource flags" 2024-08-25T22:26:30+00:00 Guenter Roeck linux@roeck-us.net 2024-08-06T01:13:41+00:00 5a4c785905fd9361d067127b42564c08893f2a6f This reverts commit 7190401fc56fb5f02ee3d04476778ab000bbaf32. Verifying the clock source sometimes deems the MIPS clock to be unstable, at least in qemu. clocksource: timekeeping watchdog on CPU0: Marking clocksource 'MIPS' as unstable because the skew is too large: clocksource: 'jiffies' wd_nsec: 500000000 wd_now: ffff8bde wd_last: ffff8bac mask: ffffffff clocksource: 'MIPS' cs_nsec: 940634468 cs_now: 310181c4 cs_last: 28090a09 mask: ffffffff clocksource: Clocksource 'MIPS' skewed 440634468 ns (440 ms) over watchdog 'jiffies' interval of 500000000 ns (500 ms) clocksource: 'MIPS' is current clocksource. If this happens, network interfaces fail to come online. Signed-off-by: Guenter Roeck <linux@roeck-us.net> 
This reverts commit 7190401fc56fb5f02ee3d04476778ab000bbaf32.

Verifying the clock source sometimes deems the MIPS clock
to be unstable, at least in qemu.

clocksource: timekeeping watchdog on CPU0: Marking clocksource 'MIPS' as unstable because the skew is too large:
clocksource:                       'jiffies' wd_nsec: 500000000 wd_now: ffff8bde wd_last: ffff8bac mask: ffffffff
clocksource:                       'MIPS' cs_nsec: 940634468 cs_now: 310181c4 cs_last: 28090a09 mask: ffffffff
clocksource:                       Clocksource 'MIPS' skewed 440634468 ns (440 ms) over watchdog 'jiffies' interval of 500000000 ns (500 ms)
clocksource:                       'MIPS' is current clocksource.

If this happens, network interfaces fail to come online.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Merge tag 'mips-fixes_6.11_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux 2024-08-24T02:10:43+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-08-24T02:10:43+00:00 5bd6cf00740765c47b5684e2d75ac90d3371659a Pull MIPS fixes from Thomas Bogendoerfer: - Set correct timer mode on Loongson64 - Only request r4k clockevent interrupt on one CPU * tag 'mips-fixes_6.11_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: cevt-r4k: Don't call get_c0_compare_int if timer irq is installed MIPS: Loongson64: Set timer mode in cpu-probe 
Pull MIPS fixes from Thomas Bogendoerfer:

 - Set correct timer mode on Loongson64

 - Only request r4k clockevent interrupt on one CPU

* tag 'mips-fixes_6.11_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: cevt-r4k: Don't call get_c0_compare_int if timer irq is installed
  MIPS: Loongson64: Set timer mode in cpu-probe
MIPS: cevt-r4k: Don't call get_c0_compare_int if timer irq is installed 2024-08-20T08:36:52+00:00 Jiaxun Yang jiaxun.yang@flygoat.com 2024-08-13T09:59:08+00:00 50f2b98dc83de7809a5c5bf0ccf9af2e75c37c13 This avoids warning: [ 0.118053] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:283 Caused by get_c0_compare_int on secondary CPU. We also skipped saving IRQ number to struct clock_event_device *cd as it's never used by clockevent core, as per comments it's only meant for "non CPU local devices". Reported-by: Serge Semin <fancer.lancer@gmail.com> Closes: https://lore.kernel.org/linux-mips/6szkkqxpsw26zajwysdrwplpjvhl5abpnmxgu2xuj3dkzjnvsf@4daqrz4mf44k/ Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Tested-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> 
This avoids warning:

[    0.118053] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:283

Caused by get_c0_compare_int on secondary CPU.

We also skipped saving IRQ number to struct clock_event_device *cd as
it's never used by clockevent core, as per comments it's only meant
for "non CPU local devices".

Reported-by: Serge Semin <fancer.lancer@gmail.com>
Closes: https://lore.kernel.org/linux-mips/6szkkqxpsw26zajwysdrwplpjvhl5abpnmxgu2xuj3dkzjnvsf@4daqrz4mf44k/
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
mips: sgi-ip22: Fix the build 2024-08-13T09:34:55+00:00 Bart Van Assche bvanassche@acm.org 2024-08-05T23:20:21+00:00 cdd1fa91a6b8c7cd93b3abf9f3ef05b8ce741b61 Fix a recently introduced build failure. Fixes: d69d80484598 ("driver core: have match() callback in struct bus_type take a const *") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20240805232026.65087-3-bvanassche@acm.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Fix a recently introduced build failure.

Fixes: d69d80484598 ("driver core: have match() callback in struct bus_type take a const *")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240805232026.65087-3-bvanassche@acm.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
MIPS: Loongson64: Set timer mode in cpu-probe 2024-08-08T16:17:43+00:00 Jiaxun Yang jiaxun.yang@flygoat.com 2024-07-23T09:15:44+00:00 1cb6ab446424649f03c82334634360c2e3043684 Loongson64 C and G processors have EXTIMER feature which is conflicting with CP0 counter. Although the processor resets in EXTIMER disabled & INTIMER enabled mode, which is compatible with MIPS CP0 compare, firmware may attempt to enable EXTIMER and interfere CP0 compare. Set timer mode back to MIPS compatible mode to fix booting on systems with such firmware before we have an actual driver for EXTIMER. Cc: stable@vger.kernel.org Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> 
Loongson64 C and G processors have EXTIMER feature which
is conflicting with CP0 counter.

Although the processor resets in EXTIMER disabled & INTIMER
enabled mode, which is compatible with MIPS CP0 compare, firmware
may attempt to enable EXTIMER and interfere CP0 compare.

Set timer mode back to MIPS compatible mode to fix booting on
systems with such firmware before we have an actual driver for
EXTIMER.

Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Merge tag 'mips_6.11_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux 2024-07-25T19:41:53+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-07-25T19:41:53+00:00 28e7241cb857415fbc8d8d962e2b423c3842e9f9 Pull MIPS updates from Thomas Bogendoerfer: - Use improved timer sync for Loongson64 - Fix address of GCR_ACCESS register - Add missing MODULE_DESCRIPTION * tag 'mips_6.11_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: mips: sibyte: add missing MODULE_DESCRIPTION() macro MIPS: SMP-CPS: Fix address for GCR_ACCESS register for CM3 and later MIPS: Loongson64: Switch to SYNC_R4K 
Pull MIPS updates from Thomas Bogendoerfer:

 - Use improved timer sync for Loongson64

 - Fix address of GCR_ACCESS register

 - Add missing MODULE_DESCRIPTION

* tag 'mips_6.11_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  mips: sibyte: add missing MODULE_DESCRIPTION() macro
  MIPS: SMP-CPS: Fix address for GCR_ACCESS register for CM3 and later
  MIPS: Loongson64: Switch to SYNC_R4K