Pull MIPS fixes from Thomas Bogendoerfer:
- fixes for KVM
- fix for loongson build and cpu probing
- DT fixes
* tag 'mips_6.5_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: kvm: Fix build error with KVM_MIPS_DEBUG_COP0_COUNTERS enabled
MIPS: dts: add missing space before {
MIPS: Loongson: Fix build error when make modules_install
MIPS: KVM: Fix NULL pointer dereference
MIPS: Loongson: Fix cpu_probe_loongson() again
Commit 7db5e9e9e5e6c10d7d ("MIPS: loongson64: fix FTLB configuration")
move decode_configs() from the beginning of cpu_probe_loongson() to the
end in order to fix FTLB configuration. However, it breaks the CPUCFG
decoding because decode_configs() use "c->options = xxxx" rather than
"c->options |= xxxx", all information get from CPUCFG by decode_cpucfg()
is lost.
This causes error when creating a KVM guest on Loongson-3A4000:
Exception Code: 4 not handled @ PC: 0000000087ad5981, inst: 0xcb7a1898 BadVaddr: 0x0 Status: 0x0
Fix this by moving the c->cputype setting to the beginning and moving
decode_configs() after that.
Fixes: 7db5e9e9e5e6c10d7d ("MIPS: loongson64: fix FTLB configuration")
Cc: stable@vger.kernel.org
Cc: Huang Pei <huangpei@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Pull MIPS updates from Thomas Bogendoerfer:
- add support for TP-Link HC220 G5 v1
- add support for Wifi/Bluetooth on CI20
- rework Ralink clock and reset handling
- cleanups and fixes
* tag 'mips_6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (58 commits)
MIPS: Loongson64: DTS: Add RTC support to Loongson-2K1000
MIPS: Loongson64: DTS: Add RTC support to LS7A PCH
MIPS: OCTEON: octeon-usb: cleanup divider calculation
MIPS: OCTEON: octeon-usb: introduce dwc3_octeon_{read,write}q
MIPS: OCTEON: octeon-usb: move gpio config to separate function
MIPS: OCTEON: octeon-usb: use bitfields for shim register
MIPS: OCTEON: octeon-usb: use bitfields for host config register
MIPS: OCTEON: octeon-usb: use bitfields for control register
MIPS: OCTEON: octeon-usb: add all register offsets
mips: ralink: match all supported system controller compatible strings
MIPS: dec: prom: Address -Warray-bounds warning
MIPS: DTS: CI20: Raise VDDCORE voltage to 1.125 volts
clk: ralink: mtmips: Fix uninitialized use of ret in mtmips_register_{fixed,factor}_clocks()
mips: ralink: introduce commonly used remap node function
mips: pci-mt7620: use dev_info() to log PCIe device detection result
mips: pci-mt7620: do not print NFTS register value as error log
MAINTAINERS: add Mediatek MTMIPS Clock maintainer
mips: ralink: get cpu rate from new driver code
mips: ralink: remove reset related code
mips: ralink: mt7620: remove clock related code
...
Pull mm updates from Andrew Morton: - Yosry Ahmed brought back some cgroup v1 stats in OOM logs - Yosry has also eliminated cgroup's atomic rstat flushing - Nhat Pham adds the new cachestat() syscall. It provides userspace with the ability to query pagecache status - a similar concept to mincore() but more powerful and with improved usability - Mel Gorman provides more optimizations for compaction, reducing the prevalence of page rescanning - Lorenzo Stoakes has done some maintanance work on the get_user_pages() interface - Liam Howlett continues with cleanups and maintenance work to the maple tree code. Peng Zhang also does some work on maple tree - Johannes Weiner has done some cleanup work on the compaction code - David Hildenbrand has contributed additional selftests for get_user_pages() - Thomas Gleixner has contributed some maintenance and optimization work for the vmalloc code - Baolin Wang has provided some compaction cleanups, - SeongJae Park continues maintenance work on the DAMON code - Huang Ying has done some maintenance on the swap code's usage of device refcounting - Christoph Hellwig has some cleanups for the filemap/directio code - Ryan Roberts provides two patch series which yield some rationalization of the kernel's access to pte entries - use the provided APIs rather than open-coding accesses - Lorenzo Stoakes has some fixes to the interaction between pagecache and directio access to file mappings - John Hubbard has a series of fixes to the MM selftesting code - ZhangPeng continues the folio conversion campaign - Hugh Dickins has been working on the pagetable handling code, mainly with a view to reducing the load on the mmap_lock - Catalin Marinas has reduced the arm64 kmalloc() minimum alignment from 128 to 8 - Domenico Cerasuolo has improved the zswap reclaim mechanism by reorganizing the LRU management - Matthew Wilcox provides some fixups to make gfs2 work better with the buffer_head code - Vishal Moola also has done some folio conversion work - Matthew Wilcox has removed the remnants of the pagevec code - their functionality is migrated over to struct folio_batch * tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (380 commits) mm/hugetlb: remove hugetlb_set_page_subpool() mm: nommu: correct the range of mmap_sem_read_lock in task_mem() hugetlb: revert use of page_cache_next_miss() Revert "page cache: fix page_cache_next/prev_miss off by one" mm/vmscan: fix root proactive reclaim unthrottling unbalanced node mm: memcg: rename and document global_reclaim() mm: kill [add|del]_page_to_lru_list() mm: compaction: convert to use a folio in isolate_migratepages_block() mm: zswap: fix double invalidate with exclusive loads mm: remove unnecessary pagevec includes mm: remove references to pagevec mm: rename invalidate_mapping_pagevec to mapping_try_invalidate mm: remove struct pagevec net: convert sunrpc from pagevec to folio_batch i915: convert i915_gpu_error to use a folio_batch pagevec: rename fbatch_count() mm: remove check_move_unevictable_pages() drm: convert drm_gem_put_pages() to use a folio_batch i915: convert shmem_sg_free_table() to use a folio_batch scatterlist: add sg_set_folio() ...
Pull SMP updates from Thomas Gleixner:
"A large update for SMP management:
- Parallel CPU bringup
The reason why people are interested in parallel bringup is to
shorten the (kexec) reboot time of cloud servers to reduce the
downtime of the VM tenants.
The current fully serialized bringup does the following per AP:
1) Prepare callbacks (allocate, intialize, create threads)
2) Kick the AP alive (e.g. INIT/SIPI on x86)
3) Wait for the AP to report alive state
4) Let the AP continue through the atomic bringup
5) Let the AP run the threaded bringup to full online state
There are two significant delays:
#3 The time for an AP to report alive state in start_secondary()
on x86 has been measured in the range between 350us and 3.5ms
depending on vendor and CPU type, BIOS microcode size etc.
#4 The atomic bringup does the microcode update. This has been
measured to take up to ~8ms on the primary threads depending
on the microcode patch size to apply.
On a two socket SKL server with 56 cores (112 threads) the boot CPU
spends on current mainline about 800ms busy waiting for the APs to
come up and apply microcode. That's more than 80% of the actual
onlining procedure.
This can be reduced significantly by splitting the bringup
mechanism into two parts:
1) Run the prepare callbacks and kick the AP alive for each AP
which needs to be brought up.
The APs wake up, do their firmware initialization and run the
low level kernel startup code including microcode loading in
parallel up to the first synchronization point. (#1 and #2
above)
2) Run the rest of the bringup code strictly serialized per CPU
(#3 - #5 above) as it's done today.
Parallelizing that stage of the CPU bringup might be possible
in theory, but it's questionable whether required surgery
would be justified for a pretty small gain.
If the system is large enough the first AP is already waiting at
the first synchronization point when the boot CPU finished the
wake-up of the last AP. That reduces the AP bringup time on that
SKL from ~800ms to ~80ms, i.e. by a factor ~10x.
The actual gain varies wildly depending on the system, CPU,
microcode patch size and other factors. There are some
opportunities to reduce the overhead further, but that needs some
deep surgery in the x86 CPU bringup code.
For now this is only enabled on x86, but the core functionality
obviously works for all SMP capable architectures.
- Enhancements for SMP function call tracing so it is possible to
locate the scheduling and the actual execution points. That allows
to measure IPI delivery time precisely"
* tag 'smp-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip: (45 commits)
trace,smp: Add tracepoints for scheduling remotelly called functions
trace,smp: Add tracepoints around remotelly called functions
MAINTAINERS: Add CPU HOTPLUG entry
x86/smpboot: Fix the parallel bringup decision
x86/realmode: Make stack lock work in trampoline_compat()
x86/smp: Initialize cpu_primary_thread_mask late
cpu/hotplug: Fix off by one in cpuhp_bringup_mask()
x86/apic: Fix use of X{,2}APIC_ENABLE in asm with older binutils
x86/smpboot/64: Implement arch_cpuhp_init_parallel_bringup() and enable it
x86/smpboot: Support parallel startup of secondary CPUs
x86/smpboot: Implement a bit spinlock to protect the realmode stack
x86/apic: Save the APIC virtual base address
cpu/hotplug: Allow "parallel" bringup up to CPUHP_BP_KICK_AP_STATE
x86/apic: Provide cpu_primary_thread mask
x86/smpboot: Enable split CPU startup
cpu/hotplug: Provide a split up CPUHP_BRINGUP mechanism
cpu/hotplug: Reset task stack state in _cpu_up()
cpu/hotplug: Remove unused state functions
riscv: Switch to hotplug core state synchronization
parisc: Switch to hotplug core state synchronization
...
Pull x86 boot updates from Thomas Gleixner: "Initialize FPU late. Right now FPU is initialized very early during boot. There is no real requirement to do so. The only requirement is to have it done before alternatives are patched. That's done in check_bugs() which does way more than what the function name suggests. So first rename check_bugs() to arch_cpu_finalize_init() which makes it clear what this is about. Move the invocation of arch_cpu_finalize_init() earlier in start_kernel() as it has to be done before fork_init() which needs to know the FPU register buffer size. With those prerequisites the FPU initialization can be moved into arch_cpu_finalize_init(), which removes it from the early and fragile part of the x86 bringup" * tag 'x86-boot-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mem_encrypt: Unbreak the AMD_MEM_ENCRYPT=n build x86/fpu: Move FPU initialization into arch_cpu_finalize_init() x86/fpu: Mark init functions __init x86/fpu: Remove cpuinfo argument from init functions x86/init: Initialize signal frame size late init, x86: Move mem_encrypt_init() into arch_cpu_finalize_init() init: Invoke arch_cpu_finalize_init() earlier init: Remove check_bugs() leftovers um/cpu: Switch to arch_cpu_finalize_init() sparc/cpu: Switch to arch_cpu_finalize_init() sh/cpu: Switch to arch_cpu_finalize_init() mips/cpu: Switch to arch_cpu_finalize_init() m68k/cpu: Switch to arch_cpu_finalize_init() loongarch/cpu: Switch to arch_cpu_finalize_init() ia64/cpu: Switch to arch_cpu_finalize_init() ARM: cpu: Switch to arch_cpu_finalize_init() x86/cpu: Switch to arch_cpu_finalize_init() init: Provide arch_cpu_finalize_init()
After commit 96cb8ae28c65 ("MIPS: Rework smt cmdline parameters"),
modpost complains when building with clang:
WARNING: modpost: vmlinux.o: section mismatch in reference: core_vpe_count (section: .text) -> smp_max_threads (section: .init.data)
This warning occurs when core_vpe_count() is not inlined, as it appears
that a non-init function is referring to an init symbol. However, this
is not a problem in practice because core_vpe_count() is only called
from __init functions, cps_smp_setup() and cps_prepare_cpus().
Resolve the warning by marking core_vpe_count() as __init, as it is only
called in an init context so it can refer to init functions and symbols
and have its memory freed on boot.
Fixes: 96cb8ae28c65 ("MIPS: Rework smt cmdline parameters")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
check_bugs() is about to be phased out. Switch over to the new arch_cpu_finalize_init() implementation. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20230613224545.312438573@linutronix.de
cachestat is previously only wired in for x86 (and architectures using the generic unistd.h table): https://lore.kernel.org/lkml/20230503013608.2431726-1-nphamcs@gmail.com/ This patch wires cachestat in for all the other architectures. [nphamcs@gmail.com: wire up cachestat for arm64] Link: https://lkml.kernel.org/r/20230511092843.3896327-1-nphamcs@gmail.com Link: https://lkml.kernel.org/r/20230510195806.2902878-1-nphamcs@gmail.com Signed-off-by: Nhat Pham <nphamcs@gmail.com> Tested-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Heiko Carstens <hca@linux.ibm.com> [s390] Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Chris Zankel <chris@zankel.net> Cc: David S. Miller <davem@davemloft.net> Cc: Helge Deller <deller@gmx.de> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Richard Henderson <richard.henderson@linaro.org> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Provide a generic smt parameters interface aligned with s390 to allow users to limit smt usage and threads per core. It replaced previous undocumented "nothreads" parameter for smp-cps which is ambiguous and does not cover smp-mt. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>