linux-stable.git/arch/mips/kernel, branch v4.19.321

MIPS: SMP-CPS: Fix address for GCR_ACCESS register for CM3 and later

2024-08-19T03:32:06+00:00

[ Upstream commit a263e5f309f32301e1f3ad113293f4e68a82a646 ]

When the CM block migrated from CM2.5 to CM3.0, the address offset for
the Global CSR Access Privilege register was modified. We saw this in
the "MIPS64 I6500 Multiprocessing System Programmer's Guide," it is
stated that "the Global CSR Access Privilege register is located at
offset 0x0120" in section 5.4. It is at least the same for I6400.

This fix allows to use the VP cores in SMP mode if the reset values
were modified by the bootloader.

Based on the work of Vladimir Kondratiev
 and the feedback from Jiaxun Yang
.

Fixes: 197e89e0984a ("MIPS: mips-cm: Implement mips_cm_revision")
Signed-off-by: Gregory CLEMENT 
Reviewed-by: Jiaxun Yang 
Signed-off-by: Thomas Bogendoerfer 
Signed-off-by: Sasha Levin

mips: Call lose_fpu(0) before initializing fcr31 in mips_set_personality_nan

2024-02-23T07:12:43+00:00

commit 59be5c35850171e307ca5d3d703ee9ff4096b948 upstream.

If we still own the FPU after initializing fcr31, when we are preempted
the dirty value in the FPU will be read out and stored into fcr31,
clobbering our setting.  This can cause an improper floating-point
environment after execve().  For example:

    zsh% cat measure.c
    #include 
    int main() { return fetestexcept(FE_INEXACT); }
    zsh% cc measure.c -o measure -lm
    zsh% echo $((1.0/3)) # raising FE_INEXACT
    0.33333333333333331
    zsh% while ./measure; do ; done
    (stopped in seconds)

Call lose_fpu(0) before setting fcr31 to prevent this.

Closes: https://lore.kernel.org/linux-mips/7a6aa1bbdbbe2e63ae96ff163fab0349f58f1b9e.camel@xry111.site/
Fixes: 9b26616c8d9d ("MIPS: Respect the ISA level in FCSR handling")
Cc: stable@vger.kernel.org
Signed-off-by: Xi Ruoyao 
Signed-off-by: Thomas Bogendoerfer 
Signed-off-by: Greg Kroah-Hartman

mips/cpu: Switch to arch_cpu_finalize_init()

2023-08-08T17:49:17+00:00

commit 7f066a22fe353a827a402ee2835e81f045b1574d upstream

check_bugs() is about to be phased out. Switch over to the new
arch_cpu_finalize_init() implementation.

No functional change.

Signed-off-by: Thomas Gleixner 
Link: https://lore.kernel.org/r/20230613224545.312438573@linutronix.de
Signed-off-by: Daniel Sneddon 
Signed-off-by: Greg Kroah-Hartman

mips: Move initrd_start check after initrd address sanitisation.

2023-06-21T13:39:57+00:00

[ Upstream commit 4897a898a216058dec55e5e5902534e6e224fcdf ]

PAGE_OFFSET is technically a virtual address so when checking the value of
initrd_start against it we should make sure that it has been sanitised from
the values passed by the bootloader. Without this change, even with a bootloader
that passes correct addresses for an initrd, we are failing to load it on MT7621
boards, for example.

Signed-off-by: Liviu Dudau 
Signed-off-by: Thomas Bogendoerfer 
Signed-off-by: Sasha Levin

MIPS: vpe-mt: drop physical_memsize

2023-03-11T15:31:44+00:00

[ Upstream commit 91dc288f4edf0d768e46c2c6d33e0ab703403459 ]

When neither LANTIQ nor MIPS_MALTA is set, 'physical_memsize' is not
declared. This causes the build to fail with:

mips-linux-ld: arch/mips/kernel/vpe-mt.o: in function `vpe_run':
arch/mips/kernel/vpe-mt.c:(.text.vpe_run+0x280): undefined reference to `physical_memsize'

LANTIQ is not using 'physical_memsize' and MIPS_MALTA's use of it is
self-contained in mti-malta/malta-dtshim.c.
Use of physical_memsize in vpe-mt.c appears to be unused, so eliminate
this loader mode completely and require VPE programs to be compiled with
DFLT_STACK_SIZE and DFLT_HEAP_SIZE defined.

Fixes: 9050d50e2244 ("MIPS: lantiq: Set physical_memsize")
Fixes: 1a2a6d7e8816 ("MIPS: APRP: Split VPE loader into separate files.")
Signed-off-by: Randy Dunlap 
Reported-by: kernel test robot 
Link: https://lore.kernel.org/all/202302030625.2g3E98sY-lkp@intel.com/
Cc: Dengcheng Zhu 
Cc: John Crispin 
Cc: Thomas Bogendoerfer 
Cc: Philippe Mathieu-Daudé 
Cc: "Steven J. Hill" 
Cc: Qais Yousef 
Cc: Yang Yingliang 
Cc: Hauke Mehrtens 
Cc: James Hogan 
Cc: linux-mips@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer 
Signed-off-by: Sasha Levin

exit: Add and use make_task_dead.

2023-02-06T06:49:45+00:00

commit 0e25498f8cd43c1b5aa327f373dd094e9a006da7 upstream.

There are two big uses of do_exit.  The first is it's design use to be
the guts of the exit(2) system call.  The second use is to terminate
a task after something catastrophic has happened like a NULL pointer
in kernel code.

Add a function make_task_dead that is initialy exactly the same as
do_exit to cover the cases where do_exit is called to handle
catastrophic failure.  In time this can probably be reduced to just a
light wrapper around do_task_dead. For now keep it exactly the same so
that there will be no behavioral differences introducing this new
concept.

Replace all of the uses of do_exit that use it for catastraphic
task cleanup with make_task_dead to make it clear what the code
is doing.

As part of this rename rewind_stack_do_exit
rewind_stack_and_make_dead.

Signed-off-by: "Eric W. Biederman" 
Signed-off-by: Eric Biggers 
Signed-off-by: Greg Kroah-Hartman

MIPS: vpe-cmp: fix possible memory leak while module exiting

2023-01-18T10:30:05+00:00

[ Upstream commit c5ed1fe0801f0c66b0fbce2785239a5664629057 ]

dev_set_name() allocates memory for name, it need be freed
when module exiting, call put_device() to give up reference,
so that it can be freed in kobject_cleanup() when the refcount
hit to 0. The vpe_device is static, so remove kfree() from
vpe_device_release().

Fixes: 17a1d523aa58 ("MIPS: APRP: Add VPE loader support for CMP platforms.")
Signed-off-by: Yang Yingliang 
Signed-off-by: Thomas Bogendoerfer 
Signed-off-by: Sasha Levin

MIPS: vpe-mt: fix possible memory leak while module exiting

2023-01-18T10:30:05+00:00

[ Upstream commit 5822e8cc84ee37338ab0bdc3124f6eec04dc232d ]

Afer commit 1fa5ae857bb1 ("driver core: get rid of struct device's
bus_id string array"), the name of device is allocated dynamically,
it need be freed when module exiting, call put_device() to give up
reference, so that it can be freed in kobject_cleanup() when the
refcount hit to 0. The vpe_device is static, so remove kfree() from
vpe_device_release().

Fixes: 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array")
Signed-off-by: Yang Yingliang 
Signed-off-by: Thomas Bogendoerfer 
Signed-off-by: Sasha Levin

MIPS: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK

2022-08-25T09:14:56+00:00

commit e1a534f5d074db45ae5cbac41d8912b98e96a006 upstream.

When CONFIG_CPUMASK_OFFSTACK and CONFIG_DEBUG_PER_CPU_MAPS is selected,
cpu_max_bits_warn() generates a runtime warning similar as below while
we show /proc/cpuinfo. Fix this by using nr_cpu_ids (the runtime limit)
instead of NR_CPUS to iterate CPUs.

[    3.052463] ------------[ cut here ]------------
[    3.059679] WARNING: CPU: 3 PID: 1 at include/linux/cpumask.h:108 show_cpuinfo+0x5e8/0x5f0
[    3.070072] Modules linked in: efivarfs autofs4
[    3.076257] CPU: 0 PID: 1 Comm: systemd Not tainted 5.19-rc5+ #1052
[    3.084034] Hardware name: Loongson Loongson-3A4000-7A1000-1w-V0.1-CRB/Loongson-LS3A4000-7A1000-1w-EVB-V1.21, BIOS Loongson-UDK2018-V2.0.04082-beta7 04/27
[    3.099465] Stack : 9000000100157b08 9000000000f18530 9000000000cf846c 9000000100154000
[    3.109127]         9000000100157a50 0000000000000000 9000000100157a58 9000000000ef7430
[    3.118774]         90000001001578e8 0000000000000040 0000000000000020 ffffffffffffffff
[    3.128412]         0000000000aaaaaa 1ab25f00eec96a37 900000010021de80 900000000101c890
[    3.138056]         0000000000000000 0000000000000000 0000000000000000 0000000000aaaaaa
[    3.147711]         ffff8000339dc220 0000000000000001 0000000006ab4000 0000000000000000
[    3.157364]         900000000101c998 0000000000000004 9000000000ef7430 0000000000000000
[    3.167012]         0000000000000009 000000000000006c 0000000000000000 0000000000000000
[    3.176641]         9000000000d3de08 9000000001639390 90000000002086d8 00007ffff0080286
[    3.186260]         00000000000000b0 0000000000000004 0000000000000000 0000000000071c1c
[    3.195868]         ...
[    3.199917] Call Trace:
[    3.203941] [<98000000002086d8>] show_stack+0x38/0x14c
[    3.210666] [<9800000000cf846c>] dump_stack_lvl+0x60/0x88
[    3.217625] [<980000000023d268>] __warn+0xd0/0x100
[    3.223958] [<9800000000cf3c90>] warn_slowpath_fmt+0x7c/0xcc
[    3.231150] [<9800000000210220>] show_cpuinfo+0x5e8/0x5f0
[    3.238080] [<98000000004f578c>] seq_read_iter+0x354/0x4b4
[    3.245098] [<98000000004c2e90>] new_sync_read+0x17c/0x1c4
[    3.252114] [<98000000004c5174>] vfs_read+0x138/0x1d0
[    3.258694] [<98000000004c55f8>] ksys_read+0x70/0x100
[    3.265265] [<9800000000cfde9c>] do_syscall+0x7c/0x94
[    3.271820] [<9800000000202fe4>] handle_syscall+0xc4/0x160
[    3.281824] ---[ end trace 8b484262b4b8c24c ]---

Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen 
Signed-off-by: Thomas Bogendoerfer 
Signed-off-by: Greg Kroah-Hartman

mips: cpc: Fix refcount leak in mips_cpc_default_phys_base

2022-06-14T14:59:34+00:00

[ Upstream commit 4107fa700f314592850e2c64608f6ede4c077476 ]

Add the missing of_node_put() to release the refcount incremented
by of_find_compatible_node().

Signed-off-by: Gong Yuanjun 
Reviewed-by: Serge Semin 
Signed-off-by: Thomas Bogendoerfer 
Signed-off-by: Sasha Levin