linux-stable.git/arch/mips/kernel, branch v3.16.67

mips: Use sigsp()

2019-05-02T20:41:44+00:00

commit 7c4f563507c33ca97dcfbd62dba1e9232575d499 upstream.

Use sigsp() instead of the open coded variant.

Signed-off-by: Richard Weinberger 
[bwh: Backported to 3.16 as dependency of commit 35634ffa1751
 "signal: Always notice exiting tasks"]
Signed-off-by: Ben Hutchings

mips: Use get_signal() signal_setup_done()

2019-05-02T20:41:44+00:00

commit 81d103bf80678669c56658185e758fc3f9845d71 upstream.

Use the more generic functions get_signal() signal_setup_done()
for signal delivery.

Signed-off-by: Richard Weinberger 
[bwh: Backported to 3.16 as dependency of commit 35634ffa1751
 "signal: Always notice exiting tasks"]
Signed-off-by: Ben Hutchings

MIPS: Remove function size check in get_frame_info()

2019-05-02T20:41:38+00:00

commit 2b424cfc69728224fcb5fad138ea7260728e0901 upstream.

Patch (b6c7a324df37b "MIPS: Fix get_frame_info() handling of
microMIPS function size.") introduces additional function size
check for microMIPS by only checking insn between ip and ip + func_size.
However, func_size in get_frame_info() is always 0 if KALLSYMS is not
enabled. This causes get_frame_info() to return immediately without
calculating correct frame_size, which in turn causes "Can't analyze
schedule() prologue" warning messages at boot time.

This patch removes func_size check, and let the frame_size check run
up to 128 insns for both MIPS and microMIPS.

Signed-off-by: Jun-Ru Chang 
Signed-off-by: Tony Wu 
Signed-off-by: Paul Burton 
Fixes: b6c7a324df37b ("MIPS: Fix get_frame_info() handling of microMIPS function size.")
Cc: 
Cc: 
Cc: 
Cc: 
Cc: 
Cc: 
Cc: 
Cc: 
Signed-off-by: Ben Hutchings

MIPS: Correct the 64-bit DSP accumulator register size

2018-12-16T22:08:17+00:00

commit f5958b4cf4fc38ed4583ab83fb7c4cd1ab05f47b upstream.

Use the `unsigned long' rather than `__u32' type for DSP accumulator
registers, like with the regular MIPS multiply/divide accumulator and
general-purpose registers, as all are 64-bit in 64-bit implementations
and using a 32-bit data type leads to contents truncation on context
saving.

Update `arch_ptrace' and `compat_arch_ptrace' accordingly, removing
casts that are similarly not used with multiply/divide accumulator or
general-purpose register accesses.

Signed-off-by: Maciej W. Rozycki 
Signed-off-by: Paul Burton 
Fixes: e50c0a8fa60d ("Support the MIPS32 / MIPS64 DSP ASE.")
Patchwork: https://patchwork.linux-mips.org/patch/19329/
Cc: Alexander Viro 
Cc: James Hogan 
Cc: Ralf Baechle 
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ben Hutchings

MIPS: ptrace: Fix PTRACE_PEEKUSR requests for 64-bit FGRs

2018-10-21T07:46:17+00:00

commit c7e814628df65f424fe197dde73bfc67e4a244d7 upstream.

Use 64-bit accesses for 64-bit floating-point general registers with
PTRACE_PEEKUSR, removing the truncation of their upper halves in the
FR=1 mode, caused by commit bbd426f542cb ("MIPS: Simplify FP context
access"), which inadvertently switched them to using 32-bit accesses.

The PTRACE_POKEUSR side is fine as it's never been broken and continues
using 64-bit accesses.

Fixes: bbd426f542cb ("MIPS: Simplify FP context access")
Signed-off-by: Maciej W. Rozycki 
Cc: Ralf Baechle 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/19334/
Signed-off-by: James Hogan 
Signed-off-by: Ben Hutchings

MIPS: Fix ptrace(2) PTRACE_PEEKUSR and PTRACE_POKEUSR accesses to o32 FGRs

2018-10-21T07:46:06+00:00

commit 9a3a92ccfe3620743d4ae57c987dc8e9c5f88996 upstream.

Check the TIF_32BIT_FPREGS task setting of the tracee rather than the
tracer in determining the layout of floating-point general registers in
the floating-point context, correcting access to odd-numbered registers
for o32 tracees where the setting disagrees between the two processes.

Fixes: 597ce1723e0f ("MIPS: Support for 64-bit FP with O32 binaries")
Signed-off-by: Maciej W. Rozycki 
Cc: Ralf Baechle 
Cc: linux-mips@linux-mips.org
Signed-off-by: James Hogan 
Signed-off-by: Ben Hutchings

MIPS: ptrace: Expose FIR register through FP regset

2018-10-21T07:46:06+00:00

commit 71e909c0cdad28a1df1fa14442929e68615dee45 upstream.

Correct commit 7aeb753b5353 ("MIPS: Implement task_user_regset_view.")
and expose the FIR register using the unused 4 bytes at the end of the
NT_PRFPREG regset.  Without that register included clients cannot use
the PTRACE_GETREGSET request to retrieve the complete FPU register set
and have to resort to one of the older interfaces, either PTRACE_PEEKUSR
or PTRACE_GETFPREGS, to retrieve the missing piece of data.  Also the
register is irreversibly missing from core dumps.

This register is architecturally hardwired and read-only so the write
path does not matter.  Ignore data supplied on writes then.

Fixes: 7aeb753b5353 ("MIPS: Implement task_user_regset_view.")
Signed-off-by: James Hogan 
Signed-off-by: Maciej W. Rozycki 
Cc: Ralf Baechle 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/19273/
Signed-off-by: James Hogan 
Signed-off-by: Ben Hutchings

MIPS: BMIPS: Do not mask IPIs during suspend

2018-06-16T21:22:33+00:00

commit 06a3f0c9f2725f5d7c63c4203839373c9bd00c28 upstream.

Commit a3e6c1eff548 ("MIPS: IRQ: Fix disable_irq on CPU IRQs") fixes an
issue where disable_irq did not actually disable the irq. The bug caused
our IPIs to not be disabled, which actually is the correct behavior.

With the addition of commit a3e6c1eff548 ("MIPS: IRQ: Fix disable_irq on
CPU IRQs"), the IPIs were getting disabled going into suspend, thus
schedule_ipi() was not being called. This caused deadlocks where
schedulable task were not being scheduled and other cpus were waiting
for them to do something.

Add the IRQF_NO_SUSPEND flag so an irq_disable will not be called on the
IPIs during suspend.

Signed-off-by: Justin Chen 
Fixes: a3e6c1eff548 ("MIPS: IRQ: Fix disabled_irq on CPU IRQs")
Cc: Florian Fainelli 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17385/
[jhogan@kernel.org: checkpatch: wrap long lines and fix commit refs]
Signed-off-by: James Hogan 
Signed-off-by: Ben Hutchings

MIPS: Normalise code flow in the CpU exception handler

2018-06-16T21:21:28+00:00

commit 27e28e8ec47a5ce335ebf25d34ca356c80635908 upstream.

Changes applied to `do_cpu' over time reduced the use of the SIGILL
issued with `force_sig' at the end to a single CU3 case only in the
switch statement there.  Move that `force_sig' call over to right where
required then and toss out the pile of gotos now not needed to skip over
the call, replacing them with regular breaks out of the switch.

Signed-off-by: Maciej W. Rozycki 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9683/
Signed-off-by: Ralf Baechle 
Signed-off-by: Ben Hutchings

MIPS: CPS: Fix MIPS_ISA_LEVEL_RAW fallout

2018-03-03T15:52:35+00:00

commit 8dbc1864b74f5dea5a3f7c30ca8fd358a675132f upstream.

Commit 17278a91e04f ("MIPS: CPS: Fix r1 .set mt assembler warning")
added .set MIPS_ISA_LEVEL_RAW to silence warnings about .set mt on r1,
however this can result in a MOVE being encoded as a 64-bit DADDU
instruction on certain version of binutils (e.g. 2.22), and reserved
instruction exceptions at runtime on 32-bit hardware.

Reduce the sizes of the push/pop sections to include only instructions
that are part of the MT ASE or which won't convert to 64-bit
instructions after .set mips64r2/mips64r6.

Reported-by: Greg Ungerer 
Fixes: 17278a91e04f ("MIPS: CPS: Fix r1 .set mt assembler warning")
Signed-off-by: James Hogan 
Cc: Ralf Baechle 
Cc: Paul Burton 
Cc: linux-mips@linux-mips.org
Tested-by: Greg Ungerer 
Patchwork: https://patchwork.linux-mips.org/patch/18578/
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings