linux-stable.git/arch/mips/kernel, branch linux-5.17.y

mips: cpc: Fix refcount leak in mips_cpc_default_phys_base

2022-06-14T16:41:26+00:00

[ Upstream commit 4107fa700f314592850e2c64608f6ede4c077476 ]

Add the missing of_node_put() to release the refcount incremented
by of_find_compatible_node().

Signed-off-by: Gong Yuanjun 
Reviewed-by: Serge Semin 
Signed-off-by: Thomas Bogendoerfer 
Signed-off-by: Sasha Levin

MIPS: Fix CP0 counter erratum detection for R4k CPUs

2022-05-12T10:32:15+00:00

commit f0a6c68f69981214cb7858738dd2bc81475111f7 upstream.

Fix the discrepancy between the two places we check for the CP0 counter
erratum in along with the incorrect comparison of the R4400 revision
number against 0x30 which matches none and consistently consider all
R4000 and R4400 processors affected, as documented in processor errata
publications[1][2][3], following the mapping between CP0 PRId register
values and processor models:

  PRId   |  Processor Model
---------+--------------------
00000422 | R4000 Revision 2.2
00000430 | R4000 Revision 3.0
00000440 | R4400 Revision 1.0
00000450 | R4400 Revision 2.0
00000460 | R4400 Revision 3.0

No other revision of either processor has ever been spotted.

Contrary to what has been stated in commit ce202cbb9e0b ("[MIPS] Assume
R4000/R4400 newer than 3.0 don't have the mfc0 count bug") marking the
CP0 counter as buggy does not preclude it from being used as either a
clock event or a clock source device.  It just cannot be used as both at
a time, because in that case clock event interrupts will be occasionally
lost, and the use as a clock event device takes precedence.

Compare against 0x4ff in `can_use_mips_counter' so that a single machine
instruction is produced.

References:

[1] "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0", MIPS
    Technologies Inc., May 10, 1994, Erratum 53, p.13

[2] "MIPS R4400PC/SC Errata, Processor Revision 1.0", MIPS Technologies
    Inc., February 9, 1994, Erratum 21, p.4

[3] "MIPS R4400PC/SC Errata, Processor Revision 2.0 & 3.0", MIPS
    Technologies Inc., January 24, 1995, Erratum 14, p.3

Signed-off-by: Maciej W. Rozycki 
Fixes: ce202cbb9e0b ("[MIPS] Assume R4000/R4400 newer than 3.0 don't have the mfc0 count bug")
Cc: stable@vger.kernel.org # v2.6.24+
Reviewed-by: Philippe Mathieu-Daudé 
Signed-off-by: Thomas Bogendoerfer 
Signed-off-by: Greg Kroah-Hartman

MIPS: fix fortify panic when copying asm exception handlers

2022-04-13T17:27:20+00:00

[ Upstream commit d17b66417308996e7e64b270a3c7f3c1fbd4cfc8 ]

With KCFLAGS="-O3", I was able to trigger a fortify-source
memcpy() overflow panic on set_vi_srs_handler().
Although O3 level is not supported in the mainline, under some
conditions that may've happened with any optimization settings,
it's just a matter of inlining luck. The panic itself is correct,
more precisely, 50/50 false-positive and not at the same time.
From the one side, no real overflow happens. Exception handler
defined in asm just gets copied to some reserved places in the
memory.
But the reason behind is that C code refers to that exception
handler declares it as `char`, i.e. something of 1 byte length.
It's obvious that the asm function itself is way more than 1 byte,
so fortify logics thought we are going to past the symbol declared.
The standard way to refer to asm symbols from C code which is not
supposed to be called from C is to declare them as
`extern const u8[]`. This is fully correct from any point of view,
as any code itself is just a bunch of bytes (including 0 as it is
for syms like _stext/_etext/etc.), and the exact size is not known
at the moment of compilation.
Adjust the type of the except_vec_vi_*() and related variables.
Make set_handler() take `const` as a second argument to avoid
cast-away warnings and give a little more room for optimization.

Signed-off-by: Alexander Lobakin 
Signed-off-by: Thomas Bogendoerfer 
Signed-off-by: Sasha Levin

mips: setup: fix setnocoherentio() boolean setting

2022-02-22T08:35:02+00:00

Correct a typo/pasto: setnocoherentio() should set
dma_default_coherent to false, not true.

Fixes: 14ac09a65e19 ("MIPS: refactor the runtime coherent vs noncoherent DMA indicators")
Signed-off-by: Randy Dunlap 
Cc: Christoph Hellwig 
Cc: Thomas Bogendoerfer 
Cc: linux-mips@vger.kernel.org
Reviewed-by: Christoph Hellwig 
Signed-off-by: Thomas Bogendoerfer

MIPS: smp: fill in sibling and core maps earlier

2022-02-16T19:48:10+00:00

After enabling CONFIG_SCHED_CORE (landed during 5.14 cycle),
2-core 2-thread-per-core interAptiv (CPS-driven) started emitting
the following:

[    0.025698] CPU1 revision is: 0001a120 (MIPS interAptiv (multi))
[    0.048183] ------------[ cut here ]------------
[    0.048187] WARNING: CPU: 1 PID: 0 at kernel/sched/core.c:6025 sched_core_cpu_starting+0x198/0x240
[    0.048220] Modules linked in:
[    0.048233] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.17.0-rc3+ #35 b7b319f24073fd9a3c2aa7ad15fb7993eec0b26f
[    0.048247] Stack : 817f0000 00000004 327804c8 810eb050 00000000 00000004 00000000 c314fdd1
[    0.048278]         830cbd64 819c0000 81800000 817f0000 83070bf4 00000001 830cbd08 00000000
[    0.048307]         00000000 00000000 815fcbc4 00000000 00000000 00000000 00000000 00000000
[    0.048334]         00000000 00000000 00000000 00000000 817f0000 00000000 00000000 817f6f34
[    0.048361]         817f0000 818a3c00 817f0000 00000004 00000000 00000000 4dc33260 0018c933
[    0.048389]         ...
[    0.048396] Call Trace:
[    0.048399] [<8105a7bc>] show_stack+0x3c/0x140
[    0.048424] [<8131c2a0>] dump_stack_lvl+0x60/0x80
[    0.048440] [<8108b5c0>] __warn+0xc0/0xf4
[    0.048454] [<8108b658>] warn_slowpath_fmt+0x64/0x10c
[    0.048467] [<810bd418>] sched_core_cpu_starting+0x198/0x240
[    0.048483] [<810c6514>] sched_cpu_starting+0x14/0x80
[    0.048497] [<8108c0f8>] cpuhp_invoke_callback_range+0x78/0x140
[    0.048510] [<8108d914>] notify_cpu_starting+0x94/0x140
[    0.048523] [<8106593c>] start_secondary+0xbc/0x280
[    0.048539]
[    0.048543] ---[ end trace 0000000000000000 ]---
[    0.048636] Synchronize counters for CPU 1: done.

...for each but CPU 0/boot.
Basic debug printks right before the mentioned line say:

[    0.048170] CPU: 1, smt_mask:

So smt_mask, which is sibling mask obviously, is empty when entering
the function.
This is critical, as sched_core_cpu_starting() calculates
core-scheduling parameters only once per CPU start, and it's crucial
to have all the parameters filled in at that moment (at least it
uses cpu_smt_mask() which in fact is `&cpu_sibling_map[cpu]` on
MIPS).

A bit of debugging led me to that set_cpu_sibling_map() performing
the actual map calculation, was being invocated after
notify_cpu_start(), and exactly the latter function starts CPU HP
callback round (sched_core_cpu_starting() is basically a CPU HP
callback).
While the flow is same on ARM64 (maps after the notifier, although
before calling set_cpu_online()), x86 started calculating sibling
maps earlier than starting the CPU HP callbacks in Linux 4.14 (see
[0] for the reference). Neither me nor my brief tests couldn't find
any potential caveats in calculating the maps right after performing
delay calibration, but the WARN splat is now gone.
The very same debug prints now yield exactly what I expected from
them:

[    0.048433] CPU: 1, smt_mask: 0-1

[0] https://git.kernel.org/pub/scm/linux/kernel/git/mips/linux.git/commit/?id=76ce7cfe35ef

Signed-off-by: Alexander Lobakin 
Reviewed-by: Philippe Mathieu-Daudé 
Signed-off-by: Thomas Bogendoerfer

MIPS: Fix build error due to PTR used in more places

2022-01-27T08:04:19+00:00

Use PTR_WD instead of PTR to avoid clashes with other parts.

Signed-off-by: Thomas Bogendoerfer

Merge branch 'signal-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

2022-01-17T03:49:30+00:00

Pull signal/exit/ptrace updates from Eric Biederman:
 "This set of changes deletes some dead code, makes a lot of cleanups
  which hopefully make the code easier to follow, and fixes bugs found
  along the way.

  The end-game which I have not yet reached yet is for fatal signals
  that generate coredumps to be short-circuit deliverable from
  complete_signal, for force_siginfo_to_task not to require changing
  userspace configured signal delivery state, and for the ptrace stops
  to always happen in locations where we can guarantee on all
  architectures that the all of the registers are saved and available on
  the stack.

  Removal of profile_task_ext, profile_munmap, and profile_handoff_task
  are the big successes for dead code removal this round.

  A bunch of small bug fixes are included, as most of the issues
  reported were small enough that they would not affect bisection so I
  simply added the fixes and did not fold the fixes into the changes
  they were fixing.

  There was a bug that broke coredumps piped to systemd-coredump. I
  dropped the change that caused that bug and replaced it entirely with
  something much more restrained. Unfortunately that required some
  rebasing.

  Some successes after this set of changes: There are few enough calls
  to do_exit to audit in a reasonable amount of time. The lifetime of
  struct kthread now matches the lifetime of struct task, and the
  pointer to struct kthread is no longer stored in set_child_tid. The
  flag SIGNAL_GROUP_COREDUMP is removed. The field group_exit_task is
  removed. Issues where task->exit_code was examined with
  signal->group_exit_code should been examined were fixed.

  There are several loosely related changes included because I am
  cleaning up and if I don't include them they will probably get lost.

  The original postings of these changes can be found at:
     https://lkml.kernel.org/r/87a6ha4zsd.fsf@email.froward.int.ebiederm.org
     https://lkml.kernel.org/r/87bl1kunjj.fsf@email.froward.int.ebiederm.org
     https://lkml.kernel.org/r/87r19opkx1.fsf_-_@email.froward.int.ebiederm.org

  I trimmed back the last set of changes to only the obviously correct
  once. Simply because there was less time for review than I had hoped"

* 'signal-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (44 commits)
  ptrace/m68k: Stop open coding ptrace_report_syscall
  ptrace: Remove unused regs argument from ptrace_report_syscall
  ptrace: Remove second setting of PT_SEIZED in ptrace_attach
  taskstats: Cleanup the use of task->exit_code
  exit: Use the correct exit_code in /proc//stat
  exit: Fix the exit_code for wait_task_zombie
  exit: Coredumps reach do_group_exit
  exit: Remove profile_handoff_task
  exit: Remove profile_task_exit & profile_munmap
  signal: clean up kernel-doc comments
  signal: Remove the helper signal_group_exit
  signal: Rename group_exit_task group_exec_task
  coredump: Stop setting signal->group_exit_task
  signal: Remove SIGNAL_GROUP_COREDUMP
  signal: During coredumps set SIGNAL_GROUP_EXIT in zap_process
  signal: Make coredump handling explicit in complete_signal
  signal: Have prepare_signal detect coredumps using signal->core_state
  signal: Have the oom killer detect coredumps using signal->core_state
  exit: Move force_uaccess back into do_exit
  exit: Guarantee make_task_dead leaks the tsk when calling do_task_exit
  ...

Merge branch 'akpm' (patches from Andrew)

2022-01-15T18:37:06+00:00

Merge misc updates from Andrew Morton:
 "146 patches.

  Subsystems affected by this patch series: kthread, ia64, scripts,
  ntfs, squashfs, ocfs2, vfs, and mm (slab-generic, slab, kmemleak,
  dax, kasan, debug, pagecache, gup, shmem, frontswap, memremap,
  memcg, selftests, pagemap, dma, vmalloc, memory-failure, hugetlb,
  userfaultfd, vmscan, mempolicy, oom-kill, hugetlbfs, migration, thp,
  ksm, page-poison, percpu, rmap, zswap, zram, cleanups, hmm, and
  damon)"

* emailed patches from Andrew Morton : (146 commits)
  mm/damon: hide kernel pointer from tracepoint event
  mm/damon/vaddr: hide kernel pointer from damon_va_three_regions() failure log
  mm/damon/vaddr: use pr_debug() for damon_va_three_regions() failure logging
  mm/damon/dbgfs: remove an unnecessary variable
  mm/damon: move the implementation of damon_insert_region to damon.h
  mm/damon: add access checking for hugetlb pages
  Docs/admin-guide/mm/damon/usage: update for schemes statistics
  mm/damon/dbgfs: support all DAMOS stats
  Docs/admin-guide/mm/damon/reclaim: document statistics parameters
  mm/damon/reclaim: provide reclamation statistics
  mm/damon/schemes: account how many times quota limit has exceeded
  mm/damon/schemes: account scheme actions that successfully applied
  mm/damon: remove a mistakenly added comment for a future feature
  Docs/admin-guide/mm/damon/usage: update for kdamond_pid and (mk|rm)_contexts
  Docs/admin-guide/mm/damon/usage: mention tracepoint at the beginning
  Docs/admin-guide/mm/damon/usage: remove redundant information
  Docs/admin-guide/mm/damon/usage: update for scheme quotas and watermarks
  mm/damon: convert macro functions to static inline functions
  mm/damon: modify damon_rand() macro to static inline function
  mm/damon: move damon_rand() definition into damon.h
  ...

mm/mempolicy: wire up syscall set_mempolicy_home_node

2022-01-15T14:30:30+00:00

Link: https://lkml.kernel.org/r/20211202123810.267175-4-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V 
Cc: Ben Widawsky 
Cc: Dave Hansen 
Cc: Feng Tang 
Cc: Michal Hocko 
Cc: Andrea Arcangeli 
Cc: Mel Gorman 
Cc: Mike Kravetz 
Cc: Randy Dunlap 
Cc: Vlastimil Babka 
Cc: Andi Kleen 
Cc: Dan Williams 
Cc: Huang Ying 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

MIPS: signal: Return immediately if call fails

2022-01-02T13:16:40+00:00

When debug sigaltstack(), copy_siginfo_to_user() fails first in
setup_rt_frame() if the alternate signal stack is too small, so
it should return immediately if call fails, no need to call the
following functions.

Signed-off-by: Tiezhu Yang 
Signed-off-by: Thomas Bogendoerfer