linux-stable.git/arch/mips/kernel/kgdb.c, branch linux-rolling-stable

MIPS: kernel: Drop kgdb_call_nmi_hook

2021-02-15T11:23:54+00:00

With the removal of set_fs() calls kgdb_call_nmi_hook() is now the same as
the default implementation, so we can remove it.

Signed-off-by: Thomas Bogendoerfer

Revert "MIPS: kernel: {ftrace,kgdb}: Set correct address limit for cache flushes"

2021-02-13T08:53:08+00:00

This reverts commit 6ebda44f366478d1eea180d93154e7d97b591f50.

All icache flushes in this code paths are done via flush_icache_range(),
which only uses normal cache instruction. And this is the correct thing
for EVA mode, too. So no need to do set_fs(KERNEL_DS) here.

Signed-off-by: Thomas Bogendoerfer 
Reviewed-by: Christoph Hellwig

MIPS: KGDB: fix kgdb support for SMP platforms.

2019-03-28T18:35:58+00:00

KGDB_call_nmi_hook is called by other cpu through smp call.
MIPS smp call is processed in ipi irq handler and regs is saved in
 handle_int.
So kgdb_call_nmi_hook get regs by get_irq_regs and regs will be passed
 to kgdb_cpu_enter.

Signed-off-by: Chong Qiao 
Reviewed-by: Douglas Anderson 
Acked-by: Daniel Thompson 
Signed-off-by: Paul Burton 
Cc: Ralf Baechle 
Cc: James Hogan 
Cc: Will Deacon 
Cc: Christophe Leroy 
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: QiaoChong

get rid of legacy 'get_ds()' function

2019-03-04T18:50:14+00:00

Every in-kernel use of this function defined it to KERNEL_DS (either as
an actual define, or as an inline function).  It's an entirely
historical artifact, and long long long ago used to actually read the
segment selector valueof '%ds' on x86.

Which in the kernel is always KERNEL_DS.

Inspired by a patch from Jann Horn that just did this for a very small
subset of users (the ones in fs/), along with Al who suggested a script.
I then just took it to the logical extreme and removed all the remaining
gunk.

Roughly scripted with

   git grep -l '(get_ds())' -- :^tools/ | xargs sed -i 's/(get_ds())/(KERNEL_DS)/'
   git grep -lw 'get_ds' -- :^tools/ | xargs sed -i '/^#define get_ds()/d'

plus manual fixups to remove a few unusual usage patterns, the couple of
inline function cases and to fix up a comment that had become stale.

The 'get_ds()' function remains in an x86 kvm selftest, since in user
space it actually does something relevant.

Inspired-by: Jann Horn 
Inspired-by: Al Viro 
Signed-off-by: Linus Torvalds

kgdb/treewide: constify struct kgdb_arch arch_kgdb_ops

2018-12-30T08:33:06+00:00

checkpatch.pl reports the following:

  WARNING: struct kgdb_arch should normally be const
  #28: FILE: arch/mips/kernel/kgdb.c:397:
  +struct kgdb_arch arch_kgdb_ops = {

This report makes sense, as all other ops struct, this
one should also be const. This patch does the change.

Cc: Vineet Gupta 
Cc: Russell King 
Cc: Catalin Marinas 
Cc: Will Deacon 
Cc: Yoshinori Sato 
Cc: Richard Kuo 
Cc: Michal Simek 
Cc: Ralf Baechle 
Cc: Paul Burton 
Cc: James Hogan 
Cc: Ley Foon Tan 
Cc: Benjamin Herrenschmidt 
Cc: Paul Mackerras 
Cc: Michael Ellerman 
Cc: Rich Felker 
Cc: "David S. Miller" 
Cc: Thomas Gleixner 
Cc: Ingo Molnar 
Cc: Borislav Petkov 
Cc: x86@kernel.org
Acked-by: Daniel Thompson 
Acked-by: Paul Burton 
Signed-off-by: Christophe Leroy 
Acked-by: Borislav Petkov 
Acked-by: Michael Ellerman  (powerpc)
Signed-off-by: Daniel Thompson

mips/kgdb: prepare arch_kgdb_ops for constness

2018-12-30T08:31:58+00:00

MIPS is the only architecture modifying arch_kgdb_ops during init.
This patch makes the init static, so that it can be changed to
const in following patch, as recommended by checkpatch.pl

Suggested-by: Paul Burton 
Acked-by: Daniel Thompson 
Acked-by: Paul Burton 
Signed-off-by: Christophe Leroy 
Signed-off-by: Daniel Thompson

kgdb: Fix kgdb_roundup_cpus() for arches who used smp_call_function()

2018-12-30T08:28:02+00:00

When I had lockdep turned on and dropped into kgdb I got a nice splat
on my system.  Specifically it hit:
  DEBUG_LOCKS_WARN_ON(current->hardirq_context)

Specifically it looked like this:
  sysrq: SysRq : DEBUG
  ------------[ cut here ]------------
  DEBUG_LOCKS_WARN_ON(current->hardirq_context)
  WARNING: CPU: 0 PID: 0 at .../kernel/locking/lockdep.c:2875 lockdep_hardirqs_on+0xf0/0x160
  CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.0 #27
  pstate: 604003c9 (nZCv DAIF +PAN -UAO)
  pc : lockdep_hardirqs_on+0xf0/0x160
  ...
  Call trace:
   lockdep_hardirqs_on+0xf0/0x160
   trace_hardirqs_on+0x188/0x1ac
   kgdb_roundup_cpus+0x14/0x3c
   kgdb_cpu_enter+0x53c/0x5cc
   kgdb_handle_exception+0x180/0x1d4
   kgdb_compiled_brk_fn+0x30/0x3c
   brk_handler+0x134/0x178
   do_debug_exception+0xfc/0x178
   el1_dbg+0x18/0x78
   kgdb_breakpoint+0x34/0x58
   sysrq_handle_dbg+0x54/0x5c
   __handle_sysrq+0x114/0x21c
   handle_sysrq+0x30/0x3c
   qcom_geni_serial_isr+0x2dc/0x30c
  ...
  ...
  irq event stamp: ...45
  hardirqs last  enabled at (...44): [...] __do_softirq+0xd8/0x4e4
  hardirqs last disabled at (...45): [...] el1_irq+0x74/0x130
  softirqs last  enabled at (...42): [...] _local_bh_enable+0x2c/0x34
  softirqs last disabled at (...43): [...] irq_exit+0xa8/0x100
  ---[ end trace adf21f830c46e638 ]---

Looking closely at it, it seems like a really bad idea to be calling
local_irq_enable() in kgdb_roundup_cpus().  If nothing else that seems
like it could violate spinlock semantics and cause a deadlock.

Instead, let's use a private csd alongside
smp_call_function_single_async() to round up the other CPUs.  Using
smp_call_function_single_async() doesn't require interrupts to be
enabled so we can remove the offending bit of code.

In order to avoid duplicating this across all the architectures that
use the default kgdb_roundup_cpus(), we'll add a "weak" implementation
to debug_core.c.

Looking at all the people who previously had copies of this code,
there were a few variants.  I've attempted to keep the variants
working like they used to.  Specifically:
* For arch/arc we passed NULL to kgdb_nmicallback() instead of
  get_irq_regs().
* For arch/mips there was a bit of extra code around
  kgdb_nmicallback()

NOTE: In this patch we will still get into trouble if we try to round
up a CPU that failed to round up before.  We'll try to round it up
again and potentially hang when we try to grab the csd lock.  That's
not new behavior but we'll still try to do better in a future patch.

Suggested-by: Daniel Thompson 
Signed-off-by: Douglas Anderson 
Cc: Vineet Gupta 
Cc: Russell King 
Cc: Catalin Marinas 
Cc: Will Deacon 
Cc: Richard Kuo 
Cc: Ralf Baechle 
Cc: Paul Burton 
Cc: James Hogan 
Cc: Benjamin Herrenschmidt 
Cc: Paul Mackerras 
Cc: Michael Ellerman 
Cc: Yoshinori Sato 
Cc: Rich Felker 
Cc: "David S. Miller" 
Cc: Thomas Gleixner 
Cc: Ingo Molnar 
Cc: Borislav Petkov 
Cc: "H. Peter Anvin" 
Acked-by: Will Deacon 
Signed-off-by: Daniel Thompson

kgdb: Remove irq flags from roundup

2018-12-30T08:24:21+00:00

The function kgdb_roundup_cpus() was passed a parameter that was
documented as:

> the flags that will be used when restoring the interrupts. There is
> local_irq_save() call before kgdb_roundup_cpus().

Nobody used those flags.  Anyone who wanted to temporarily turn on
interrupts just did local_irq_enable() and local_irq_disable() without
looking at them.  So we can definitely remove the flags.

Signed-off-by: Douglas Anderson 
Cc: Vineet Gupta 
Cc: Russell King 
Cc: Catalin Marinas 
Cc: Will Deacon 
Cc: Richard Kuo 
Cc: Ralf Baechle 
Cc: Paul Burton 
Cc: James Hogan 
Cc: Benjamin Herrenschmidt 
Cc: Paul Mackerras 
Cc: Michael Ellerman 
Cc: Yoshinori Sato 
Cc: Rich Felker 
Cc: "David S. Miller" 
Cc: Thomas Gleixner 
Cc: Ingo Molnar 
Cc: Borislav Petkov 
Cc: "H. Peter Anvin" 
Acked-by: Will Deacon 
Signed-off-by: Daniel Thompson

MIPS: KGDB: Use kernel context for sleeping threads

2017-04-12T20:29:22+00:00

KGDB is a kernel debug stub and it can't be used to debug userland as it
can only safely access kernel memory.

On MIPS however KGDB has always got the register state of sleeping
processes from the userland register context at the beginning of the
kernel stack. This is meaningless for kernel threads (which never enter
userland), and for user threads it prevents the user seeing what it is
doing while in the kernel:

(gdb) info threads
  Id   Target Id         Frame
  ...
  3    Thread 2 (kthreadd) 0x0000000000000000 in ?? ()
  2    Thread 1 (init)   0x000000007705c4b4 in ?? ()
  1    Thread -2 (shadowCPU0) 0xffffffff8012524c in arch_kgdb_breakpoint () at arch/mips/kernel/kgdb.c:201

Get the register state instead from the (partial) kernel register
context stored in the task's thread_struct for resume() to restore. All
threads now correctly appear to be in context_switch():

(gdb) info threads
  Id   Target Id         Frame
  ...
  3    Thread 2 (kthreadd) context_switch (rq=, cookie=..., next=, prev=0x0) at kernel/sched/core.c:2903
  2    Thread 1 (init)   context_switch (rq=, cookie=..., next=, prev=0x0) at kernel/sched/core.c:2903
  1    Thread -2 (shadowCPU0) 0xffffffff8012524c in arch_kgdb_breakpoint () at arch/mips/kernel/kgdb.c:201

Call clobbered registers which aren't saved and exception registers
(BadVAddr & Cause) which can't be easily determined without stack
unwinding are reported as 0. The PC is taken from the return address,
such that the state presented matches that found immediately after
returning from resume().

Fixes: 8854700115ec ("[MIPS] kgdb: add arch support for the kernel's kgdb core")
Signed-off-by: James Hogan 
Cc: Jason Wessel 
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15829/
Signed-off-by: Ralf Baechle

Replace with globally

2016-12-24T19:46:01+00:00

This was entirely automated, using the script by Al:

  PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*'
  sed -i -e "s!$PATT!#include !" \
        $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)

to do the replacement at the end of the merge window.

Requested-by: Al Viro 
Signed-off-by: Linus Torvalds