Pull MIPS fixes from Paul Burton:
 "A collection of MIPS fixes:

   - Fill the struct cacheinfo shared_cpu_map field with sensible
     values, notably avoiding issues with perf which was unhappy in the
     absence of these values.

   - A boot fix for Loongson 2E & 2F machines which was fallout from
     some refactoring performed this cycle.

   - A Kconfig dependency fix for the Loongson CPU HWMon driver.

   - A couple of VDSO fixes, ensuring gettimeofday() behaves
     appropriately for kernel configurations that don't include support
     for a clocksource the VDSO can use & fixing the calling convention
     for the n32 & n64 VDSOs which would previously clobber the $gp/$28
     register.

   - A build fix for vmlinuz compressed images which were
     inappropriately building with -fsanitize-coverage despite not being
     part of the kernel proper, then failing to link due to the missing
     __sanitizer_cov_trace_pc() function.

   - A couple of eBPF JIT fixes, including disabling it for MIPS32 due
     to a large number of issues with the code generated there &
     reflecting ISA dependencies in Kconfig to enforce that systems
     which don't support the JIT must include the interpreter"

* tag 'mips_fixes_5.5_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: Avoid VDSO ABI breakage due to global register variable
  MIPS: BPF: eBPF JIT: check for MIPS ISA compliance in Kconfig
  MIPS: BPF: Disable MIPS32 eBPF JIT
  MIPS: Prevent link failure with kcov instrumentation
  MIPS: Kconfig: Use correct form for 'depends on'
  mips: Fix gettimeofday() in the vdso library
  MIPS: Fix boot on Fuloong2 systems
  mips: cacheinfo: report shared CPU map

Declaring __current_thread_info as a global register variable has the
effect of preventing GCC from saving & restoring its value in cases
where the ABI would typically do so.

To quote GCC documentation:

> If the register is a call-saved register, call ABI is affected: the
> register will not be restored in function epilogue sequences after the
> variable has been assigned. Therefore, functions cannot safely return
> to callers that assume standard ABI.

When our position independent VDSO is built for the n32 or n64 ABIs all
functions it exposes should be preserving the value of $gp/$28 for their
caller, but in the presence of the __current_thread_info global register
variable GCC stops doing so & simply clobbers $gp/$28 when calculating
the address of the GOT.

In cases where the VDSO returns success this problem will typically be
masked by the caller in libc returning & restoring $gp/$28 itself, but
that is by no means guaranteed. In cases where the VDSO returns an error
libc will typically contain a fallback path which will now fail
(typically with a bad memory access) if it attempts anything which
relies upon the value of $gp/$28 - eg. accessing anything via the GOT.

One fix for this would be to move the declaration of
__current_thread_info inside the current_thread_info() function,
demoting it from global register variable to local register variable &
avoiding inadvertently creating a non-standard calling ABI for the VDSO.
Unfortunately this causes issues for clang, which doesn't support local
register variables as pointed out by commit fe92da0f355e ("MIPS: Changed
current_thread_info() to an equivalent supported by both clang and GCC")
which introduced the global register variable before we had a VDSO to
worry about.

Instead, fix this by continuing to use the global register variable for
the kernel proper but declare __current_thread_info as a simple extern
variable when building the VDSO. It should never be referenced, and will
cause a link error if it is. This resolves the calling convention issue
for the VDSO without having any impact upon the build of the kernel
itself for either clang or gcc.

Signed-off-by: Paul Burton <paulburton@kernel.org>
Fixes: ebb5e78cc634 ("MIPS: Initial implementation of a VDSO")
Reported-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <christian.brauner@canonical.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: <stable@vger.kernel.org> # v4.4+
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

Userspace cannot compile <asm/sembuf.h> due to some missing type
definitions.  For example, building it for x86 fails as follows:

    CC      usr/include/asm/sembuf.h.s
  In file included from <command-line>:32:0:
  usr/include/asm/sembuf.h:17:20: error: field `sem_perm' has incomplete type
    struct ipc64_perm sem_perm; /* permissions .. see ipc.h */
                      ^~~~~~~~
  usr/include/asm/sembuf.h:24:2: error: unknown type name `__kernel_time_t'
    __kernel_time_t sem_otime; /* last semop time */
    ^~~~~~~~~~~~~~~
  usr/include/asm/sembuf.h:25:2: error: unknown type name `__kernel_ulong_t'
    __kernel_ulong_t __unused1;
    ^~~~~~~~~~~~~~~~
  usr/include/asm/sembuf.h:26:2: error: unknown type name `__kernel_time_t'
    __kernel_time_t sem_ctime; /* last change time */
    ^~~~~~~~~~~~~~~
  usr/include/asm/sembuf.h:27:2: error: unknown type name `__kernel_ulong_t'
    __kernel_ulong_t __unused2;
    ^~~~~~~~~~~~~~~~
  usr/include/asm/sembuf.h:29:2: error: unknown type name `__kernel_ulong_t'
    __kernel_ulong_t sem_nsems; /* no. of semaphores in array */
    ^~~~~~~~~~~~~~~~
  usr/include/asm/sembuf.h:30:2: error: unknown type name `__kernel_ulong_t'
    __kernel_ulong_t __unused3;
    ^~~~~~~~~~~~~~~~
  usr/include/asm/sembuf.h:31:2: error: unknown type name `__kernel_ulong_t'
    __kernel_ulong_t __unused4;
    ^~~~~~~~~~~~~~~~

It is just a matter of missing include directive.

Include <asm/ipcbuf.h> to make it self-contained, and add it to
the compile-test coverage.

Link: http://lkml.kernel.org/r/20191030063855.9989-3-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Userspace cannot compile <asm/msgbuf.h> due to some missing type
definitions.  For example, building it for x86 fails as follows:

    CC      usr/include/asm/msgbuf.h.s
  In file included from usr/include/asm/msgbuf.h:6:0,
                   from <command-line>:32:
  usr/include/asm-generic/msgbuf.h:25:20: error: field `msg_perm' has incomplete type
    struct ipc64_perm msg_perm;
                      ^~~~~~~~
  usr/include/asm-generic/msgbuf.h:27:2: error: unknown type name `__kernel_time_t'
    __kernel_time_t msg_stime; /* last msgsnd time */
    ^~~~~~~~~~~~~~~
  usr/include/asm-generic/msgbuf.h:28:2: error: unknown type name `__kernel_time_t'
    __kernel_time_t msg_rtime; /* last msgrcv time */
    ^~~~~~~~~~~~~~~
  usr/include/asm-generic/msgbuf.h:29:2: error: unknown type name `__kernel_time_t'
    __kernel_time_t msg_ctime; /* last change time */
    ^~~~~~~~~~~~~~~
  usr/include/asm-generic/msgbuf.h:41:2: error: unknown type name `__kernel_pid_t'
    __kernel_pid_t msg_lspid; /* pid of last msgsnd */
    ^~~~~~~~~~~~~~
  usr/include/asm-generic/msgbuf.h:42:2: error: unknown type name `__kernel_pid_t'
    __kernel_pid_t msg_lrpid; /* last receive pid */
    ^~~~~~~~~~~~~~

It is just a matter of missing include directive.

Include <asm/ipcbuf.h> to make it self-contained, and add it to
the compile-test coverage.

Link: http://lkml.kernel.org/r/20191030063855.9989-2-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull PCI updates from Bjorn Helgaas:
 "Enumeration:

   - Warn if a host bridge has no NUMA info (Yunsheng Lin)

   - Add PCI_STD_NUM_BARS for the number of standard BARs (Denis
     Efremov)

  Resource management:

   - Fix boot-time Embedded Controller GPE storm caused by incorrect
     resource assignment after ACPI Bus Check Notification (Mika
     Westerberg)

   - Protect pci_reassign_bridge_resources() against concurrent
     addition/removal (Benjamin Herrenschmidt)

   - Fix bridge dma_ranges resource list cleanup (Rob Herring)

   - Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters to control
     the MMIO and prefetchable MMIO window sizes of hotplug bridges
     independently (Nicholas Johnson)

   - Fix MMIO/MMIO_PREF window assignment that assigned more space than
     desired (Nicholas Johnson)

   - Only enforce bus numbers from bridge EA if the bridge has EA
     devices downstream (Subbaraya Sundeep)

   - Consolidate DT "dma-ranges" parsing and convert all host drivers to
     use shared parsing (Rob Herring)

  Error reporting:

   - Restore AER capability after resume (Mayurkumar Patel)

   - Add PoisonTLPBlocked AER counter (Rajat Jain)

   - Use for_each_set_bit() to simplify AER code (Andy Shevchenko)

   - Fix AER kernel-doc (Andy Shevchenko)

   - Add "pcie_ports=dpc-native" parameter to allow native use of DPC
     even if platform didn't grant control over AER (Olof Johansson)

  Hotplug:

   - Avoid returning prematurely from sysfs requests to enable or
     disable a PCIe hotplug slot (Lukas Wunner)

   - Don't disable interrupts twice when suspending hotplug ports (Mika
     Westerberg)

   - Fix deadlocks when PCIe ports are hot-removed while suspended (Mika
     Westerberg)

  Power management:

   - Remove unnecessary ASPM locking (Bjorn Helgaas)

   - Add support for disabling L1 PM Substates (Heiner Kallweit)

   - Allow re-enabling Clock PM after it has been disabled (Heiner
     Kallweit)

   - Add sysfs attributes for controlling ASPM link states (Heiner
     Kallweit)

   - Remove CONFIG_PCIEASPM_DEBUG, including "link_state" and "clk_ctl"
     sysfs files (Heiner Kallweit)

   - Avoid AMD FCH XHCI USB PME# from D0 defect that prevents wakeup on
     USB 2.0 or 1.1 connect events (Kai-Heng Feng)

   - Move power state check out of pci_msi_supported() (Bjorn Helgaas)

   - Fix incorrect MSI-X masking on resume and revert related nvme quirk
     for Kingston NVME SSD running FW E8FK11.T (Jian-Hong Pan)

   - Always return devices to D0 when thawing to fix hibernation with
     drivers like mlx4 that used legacy power management (previously we
     only did it for drivers with new power management ops) (Dexuan Cui)

   - Clear PCIe PME Status even for legacy power management (Bjorn
     Helgaas)

   - Fix PCI PM documentation errors (Bjorn Helgaas)

   - Use dev_printk() for more power management messages (Bjorn Helgaas)

   - Apply D2 delay as milliseconds, not microseconds (Bjorn Helgaas)

   - Convert xen-platform from legacy to generic power management (Bjorn
     Helgaas)

   - Removed unused .resume_early() and .suspend_late() legacy power
     management hooks (Bjorn Helgaas)

   - Rearrange power management code for clarity (Rafael J. Wysocki)

   - Decode power states more clearly ("4" or "D4" really refers to
     "D3cold") (Bjorn Helgaas)

   - Notice when reading PM Control register returns an error (~0)
     instead of interpreting it as being in D3hot (Bjorn Helgaas)

   - Add missing link delays required by the PCIe spec (Mika Westerberg)

  Virtualization:

   - Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRI (Bjorn
     Helgaas)

   - Allow VFs to use PRI (the PF PRI is shared by the VFs, but the code
     previously didn't recognize that) (Kuppuswamy Sathyanarayanan)

   - Allow VFs to use PASID (the PF PASID capability is shared by the
     VFs, but the code previously didn't recognize that) (Kuppuswamy
     Sathyanarayanan)

   - Disconnect PF and VF ATS enablement, since ATS in PFs and
     associated VFs can be enabled independently (Kuppuswamy
     Sathyanarayanan)

   - Cache PRI and PASID capability offsets (Kuppuswamy Sathyanarayanan)

   - Cache the PRI PRG Response PASID Required bit (Bjorn Helgaas)

   - Consolidate ATS declarations in linux/pci-ats.h (Krzysztof
     Wilczynski)

   - Remove unused PRI and PASID stubs (Bjorn Helgaas)

   - Removed unnecessary EXPORT_SYMBOL_GPL() from ATS, PRI, and PASID
     interfaces that are only used by built-in IOMMU drivers (Bjorn
     Helgaas)

   - Hide PRI and PASID state restoration functions used only inside the
     PCI core (Bjorn Helgaas)

   - Add a DMA alias quirk for the Intel VCA NTB (Slawomir Pawlowski)

   - Serialize sysfs sriov_numvfs reads vs writes (Pierre Crégut)

   - Update Cavium ACS quirk for ThunderX2 and ThunderX3 (George
     Cherian)

   - Fix the UPDCR register address in the Intel ACS quirk (Steffen
     Liebergeld)

   - Unify ACS quirk implementations (Bjorn Helgaas)

  Amlogic Meson host bridge driver:

   - Fix meson PERST# GPIO polarity problem (Remi Pommarel)

   - Add DT bindings for Amlogic Meson G12A (Neil Armstrong)

   - Fix meson clock names to match DT bindings (Neil Armstrong)

   - Add meson support for Amlogic G12A SoC with separate shared PHY
     (Neil Armstrong)

   - Add meson extended PCIe PHY functions for Amlogic G12A USB3+PCIe
     combo PHY (Neil Armstrong)

   - Add arm64 DT for Amlogic G12A PCIe controller node (Neil Armstrong)

   - Add commented-out description of VIM3 USB3/PCIe mux in arm64 DT
     (Neil Armstrong)

  Broadcom iProc host bridge driver:

   - Invalidate iProc PAXB address mapping before programming it
     (Abhishek Shah)

   - Fix iproc-msi and mvebu __iomem annotations (Ben Dooks)

  Cadence host bridge driver:

   - Refactor Cadence PCIe host controller to use as a library for both
     host and endpoint (Tom Joseph)

  Freescale Layerscape host bridge driver:

   - Add layerscape LS1028a support (Xiaowei Bao)

  Intel VMD host bridge driver:

   - Add VMD bus 224-255 restriction decode (Jon Derrick)

   - Add VMD 8086:9A0B device ID (Jon Derrick)

   - Remove Keith from VMD maintainer list (Keith Busch)

  Marvell ARMADA 3700 / Aardvark host bridge driver:

   - Use LTSSM state to build link training flag since Aardvark doesn't
     implement the Link Training bit (Remi Pommarel)

   - Delay before training Aardvark link in case PERST# was asserted
     before the driver probe (Remi Pommarel)

   - Fix Aardvark issues with Root Control reads and writes (Remi
     Pommarel)

   - Don't rely on jiffies in Aardvark config access path since
     interrupts may be disabled (Remi Pommarel)

   - Fix Aardvark big-endian support (Grzegorz Jaszczyk)

  Marvell ARMADA 370 / XP host bridge driver:

   - Make mvebu_pci_bridge_emul_ops static (Ben Dooks)

  Microsoft Hyper-V host bridge driver:

   - Add hibernation support for Hyper-V virtual PCI devices (Dexuan
     Cui)

   - Track Hyper-V pci_protocol_version per-hbus, not globally (Dexuan
     Cui)

   - Avoid kmemleak false positive on hv hbus buffer (Dexuan Cui)

  Mobiveil host bridge driver:

   - Change mobiveil csr_read()/write() function names that conflict
     with riscv arch functions (Kefeng Wang)

  NVIDIA Tegra host bridge driver:

   - Fix Tegra CLKREQ dependency programming (Vidya Sagar)

  Renesas R-Car host bridge driver:

   - Remove unnecessary header include from rcar (Andrew Murray)

   - Tighten register index checking for rcar inbound range programming
     (Marek Vasut)

   - Fix rcar inbound range alignment calculation to improve packing of
     multiple entries (Marek Vasut)

   - Update rcar MACCTLR setting to match documentation (Yoshihiro
     Shimoda)

   - Clear bit 0 of MACCTLR before PCIETCTLR.CFINIT per manual
     (Yoshihiro Shimoda)

   - Add Marek Vasut and Yoshihiro Shimoda as R-Car maintainers (Simon
     Horman)

  Rockchip host bridge driver:

   - Make rockchip 0V9 and 1V8 power regulators non-optional (Robin
     Murphy)

  Socionext UniPhier host bridge driver:

   - Set uniphier to host (RC) mode always (Kunihiko Hayashi)

  Endpoint drivers:

   - Fix endpoint driver sign extension problem when shifting page
     number to phys_addr_t (Alan Mikhak)

  Misc:

   - Add NumaChip SPDX header (Krzysztof Wilczynski)

   - Replace EXTRA_CFLAGS with ccflags-y (Krzysztof Wilczynski)

   - Remove unused includes (Krzysztof Wilczynski)

   - Removed unused sysfs attribute groups (Ben Dooks)

   - Remove PTM and ASPM dependencies on PCIEPORTBUS (Bjorn Helgaas)

   - Add PCIe Link Control 2 register field definitions to replace magic
     numbers in AMDGPU and Radeon CIK/SI (Bjorn Helgaas)

   - Fix incorrect Link Control 2 Transmit Margin usage in AMDGPU and
     Radeon CIK/SI PCIe Gen3 link training (Bjorn Helgaas)

   - Use pcie_capability_read_word() instead of pci_read_config_word()
     in AMDGPU and Radeon CIK/SI (Frederick Lawler)

   - Remove unused pci_irq_get_node() Greg Kroah-Hartman)

   - Make asm/msi.h mandatory and simplify PCI_MSI_IRQ_DOMAIN Kconfig
     (Palmer Dabbelt, Michal Simek)

   - Read all 64 bits of Switchtec part_event_bitmap (Logan Gunthorpe)

   - Fix erroneous intel-iommu dependency on CONFIG_AMD_IOMMU (Bjorn
     Helgaas)

   - Fix bridge emulation big-endian support (Grzegorz Jaszczyk)

   - Fix dwc find_next_bit() usage (Niklas Cassel)

   - Fix pcitest.c fd leak (Hewenliang)

   - Fix typos and comments (Bjorn Helgaas)

   - Fix Kconfig whitespace errors (Krzysztof Kozlowski)"

* tag 'pci-v5.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (160 commits)
  PCI: Remove PCI_MSI_IRQ_DOMAIN architecture whitelist
  asm-generic: Make msi.h a mandatory include/asm header
  Revert "nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T"
  PCI/MSI: Fix incorrect MSI-X masking on resume
  PCI/MSI: Move power state check out of pci_msi_supported()
  PCI/MSI: Remove unused pci_irq_get_node()
  PCI: hv: Avoid a kmemleak false positive caused by the hbus buffer
  PCI: hv: Change pci_protocol_version to per-hbus
  PCI: hv: Add hibernation support
  PCI: hv: Reorganize the code in preparation of hibernation
  MAINTAINERS: Remove Keith from VMD maintainer
  PCI/ASPM: Remove PCIEASPM_DEBUG Kconfig option and related code
  PCI/ASPM: Add sysfs attributes for controlling ASPM link states
  PCI: Fix indentation
  drm/radeon: Prefer pcie_capability_read_word()
  drm/radeon: Replace numbers with PCI_EXP_LNKCTL2 definitions
  drm/radeon: Correct Transmit Margin masks
  drm/amdgpu: Prefer pcie_capability_read_word()
  PCI: uniphier: Set mode register to host mode
  drm/amdgpu: Replace numbers with PCI_EXP_LNKCTL2 definitions
  ...

The libc provides a discovery mechanism for vDSO library and its
symbols. When a symbol is not exposed by the vDSOs the libc falls back
on the system calls.

With the introduction of the unified vDSO library on mips this behavior
is not honored anymore by the kernel in the case of gettimeofday().

The issue has been noticed and reported due to a dhclient failure on the
CI20 board:

root@letux:~# dhclient
../../../../lib/isc/unix/time.c:200: Operation not permitted
root@letux:~#

Restore the original behavior fixing gettimeofday() in the vDSO library.

Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Tested-by: H. Nikolaus Schaller <hns@goldelico.com> # CI20 with JZ4780
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: mips-creator-ci20-dev@googlegroups.com
Cc: letux-kernel@openphoenux.org
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

Pull y2038 cleanups from Arnd Bergmann:
 "y2038 syscall implementation cleanups

  This is a series of cleanups for the y2038 work, mostly intended for
  namespace cleaning: the kernel defines the traditional time_t, timeval
  and timespec types that often lead to y2038-unsafe code. Even though
  the unsafe usage is mostly gone from the kernel, having the types and
  associated functions around means that we can still grow new users,
  and that we may be missing conversions to safe types that actually
  matter.

  There are still a number of driver specific patches needed to get the
  last users of these types removed, those have been submitted to the
  respective maintainers"

Link: https://lore.kernel.org/lkml/20191108210236.1296047-1-arnd@arndb.de/

* tag 'y2038-cleanups-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (26 commits)
  y2038: alarm: fix half-second cut-off
  y2038: ipc: fix x32 ABI breakage
  y2038: fix typo in powerpc vdso "LOPART"
  y2038: allow disabling time32 system calls
  y2038: itimer: change implementation to timespec64
  y2038: move itimer reset into itimer.c
  y2038: use compat_{get,set}_itimer on alpha
  y2038: itimer: compat handling to itimer.c
  y2038: time: avoid timespec usage in settimeofday()
  y2038: timerfd: Use timespec64 internally
  y2038: elfcore: Use __kernel_old_timeval for process times
  y2038: make ns_to_compat_timeval use __kernel_old_timeval
  y2038: socket: use __kernel_old_timespec instead of timespec
  y2038: socket: remove timespec reference in timestamping
  y2038: syscalls: change remaining timeval to __kernel_old_timeval
  y2038: rusage: use __kernel_old_timeval
  y2038: uapi: change __kernel_time_t to __kernel_old_time_t
  y2038: stat: avoid 'time_t' in 'struct stat'
  y2038: ipc: remove __kernel_time_t reference from headers
  y2038: vdso: powerpc: avoid timespec references
  ...

Pull dma-mapping updates from Christoph Hellwig:

 - improve dma-debug scalability (Eric Dumazet)

 - tiny dma-debug cleanup (Dan Carpenter)

 - check for vmap memory in dma_map_single (Kees Cook)

 - check for dma_addr_t overflows in dma-direct when using DMA offsets
   (Nicolas Saenz Julienne)

 - switch the x86 sta2x11 SOC to use more generic DMA code (Nicolas
   Saenz Julienne)

 - fix arm-nommu dma-ranges handling (Vladimir Murzin)

 - use __initdata in CMA (Shyam Saini)

 - replace the bus dma mask with a limit (Nicolas Saenz Julienne)

 - merge the remapping helpers into the main dma-direct flow (me)

 - switch xtensa to the generic dma remap handling (me)

 - various cleanups around dma_capable (me)

 - remove unused dev arguments to various dma-noncoherent helpers (me)

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux:

* tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping: (22 commits)
  dma-mapping: treat dev->bus_dma_mask as a DMA limit
  dma-direct: exclude dma_direct_map_resource from the min_low_pfn check
  dma-direct: don't check swiotlb=force in dma_direct_map_resource
  dma-debug: clean up put_hash_bucket()
  powerpc: remove support for NULL dev in __phys_to_dma / __dma_to_phys
  dma-direct: avoid a forward declaration for phys_to_dma
  dma-direct: unify the dma_capable definitions
  dma-mapping: drop the dev argument to arch_sync_dma_for_*
  x86/PCI: sta2x11: use default DMA address translation
  dma-direct: check for overflows on 32 bit DMA addresses
  dma-debug: increase HASH_SIZE
  dma-debug: reorder struct dma_debug_entry fields
  xtensa: use the generic uncached segment support
  dma-mapping: merge the generic remapping helpers into dma-direct
  dma-direct: provide mmap and get_sgtable method overrides
  dma-direct: remove the dma_handle argument to __dma_direct_alloc_pages
  dma-direct: remove __dma_direct_free_pages
  usb: core: Remove redundant vmap checks
  kernel: dma-contiguous: mark CMA parameters __initdata/__initconst
  dma-debug: add a schedule point in debug_dma_dump_mappings()
  ...

Commit 268a2d60013049 ("MIPS: Loongson64: Rename CPU TYPES") changed
Kconfig symbols as follows:
	CPU_LOONGSON2 to CPU_LOONGSON2EF
	CPU_LOONGSON3 to CPU_LOONGSON64
	SYS_HAS_CPU_LOONGSON3 to SYS_HAS_CPU_LOONGSON64

It did not touch SYS_HAS_CPU_LOONGSON2E or SYS_HAS_CPU_LOONGSON2F.
However, the patch changed a conditional from

 #if defined(CONFIG_SYS_HAS_CPU_LOONGSON2E) || \
     defined(CONFIG_SYS_HAS_CPU_LOONGSON2F)

to

 #if defined(CONFIG_SYS_HAS_CPU_LOONGSON2EF)

SYS_HAS_CPU_LOONGSON2EF does not exist, resulting in boot failures
with the qemu fulong2e emulation. Revert to the original code.

Fixes: 268a2d60013049 ("MIPS: Loongson64: Rename CPU TYPES")
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

msi.h is generic for all architectures except x86, which has its own
version.  Enabling MSI by adding msi.h to every architecture's Kbuild is
just an additional step which doesn't need to be done.

Make msi.h mandatory in the asm-generic/Kbuild so we don't have to do it
for each architecture.

Suggested-by: Christoph Hellwig <hch@infradead.org>
Link: https://lore.kernel.org/r/c991669e29a79b1a8e28c3b4b3a125801a693de8.1571983829.git.michal.simek@xilinx.com
Tested-by: Paul Walmsley <paul.walmsley@sifive.com> # build only, rv32/rv64
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Waiman Long <longman@redhat.com>
Acked-by: Paul Walmsley <paul.walmsley@sifive.com> # arch/riscv