linux-stable.git/arch/mips/include/asm, branch v4.4.151

MIPS: Fix off-by-one in pci_resource_to_user()

2018-08-06T14:24:29+00:00

commit 38c0a74fe06da3be133cae3fb7bde6a9438e698b upstream.

The MIPS implementation of pci_resource_to_user() introduced in v3.12 by
commit 4c2924b725fb ("MIPS: PCI: Use pci_resource_to_user to map pci
memory space properly") incorrectly sets *end to the address of the
byte after the resource, rather than the last byte of the resource.

This results in userland seeing resources as a byte larger than they
actually are, for example a 32 byte BAR will be reported by a tool such
as lspci as being 33 bytes in size:

    Region 2: I/O ports at 1000 [disabled] [size=33]

Correct this by subtracting one from the calculated end address,
reporting the correct address to userland.

Signed-off-by: Paul Burton 
Reported-by: Rui Wang 
Fixes: 4c2924b725fb ("MIPS: PCI: Use pci_resource_to_user to map pci memory space properly")
Cc: James Hogan 
Cc: Ralf Baechle 
Cc: Wolfgang Grandegger 
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # v3.12+
Patchwork: https://patchwork.linux-mips.org/patch/19829/
Signed-off-by: Greg Kroah-Hartman

MIPS: io: Add barrier after register read in inX()

2018-07-03T09:21:30+00:00

commit 18f3e95b90b28318ef35910d21c39908de672331 upstream.

While a barrier is present in the outX() functions before the register
write, a similar barrier is missing in the inX() functions after the
register read. This could allow memory accesses following inX() to
observe stale data.

This patch is very similar to commit a1cc7034e33d12dc1 ("MIPS: io: Add
barrier after register read in readX()"). Because war_io_reorder_wmb()
is both used by writeX() and outX(), if readX() need a barrier then so
does inX().

Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen 
Patchwork: https://patchwork.linux-mips.org/patch/19516/
Signed-off-by: Paul Burton 
Cc: James Hogan 
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang 
Cc: Zhangjin Wu 
Cc: Huacai Chen 
Signed-off-by: Greg Kroah-Hartman

MIPS: BCM47XX: Enable 74K Core ExternalSync for PCIe erratum

2018-07-03T09:21:30+00:00

commit 2a027b47dba6b77ab8c8e47b589ae9bbc5ac6175 upstream.

The erratum and workaround are described by BCM5300X-ES300-RDS.pdf as
below.

  R10: PCIe Transactions Periodically Fail

    Description: The BCM5300X PCIe does not maintain transaction ordering.
                 This may cause PCIe transaction failure.
    Fix Comment: Add a dummy PCIe configuration read after a PCIe
                 configuration write to ensure PCIe configuration access
                 ordering. Set ES bit of CP0 configu7 register to enable
                 sync function so that the sync instruction is functional.
    Resolution:  hndpci.c: extpci_write_config()
                 hndmips.c: si_mips_init()
                 mipsinc.h CONF7_ES

This is fixed by the CFE MIPS bcmsi chipset driver also for BCM47XX.
Also the dummy PCIe configuration read is already implemented in the
Linux BCMA driver.

Enable ExternalSync in Config7 when CONFIG_BCMA_DRIVER_PCI_HOSTMODE=y
too so that the sync instruction is externalised.

Signed-off-by: Tokunori Ikegami 
Reviewed-by: Paul Burton 
Acked-by: Hauke Mehrtens 
Cc: Chris Packham 
Cc: Rafał Miłecki 
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/19461/
Signed-off-by: James Hogan 
Signed-off-by: Greg Kroah-Hartman

MIPS: ath79: Fix AR724X_PLL_REG_PCIE_CONFIG offset

2018-05-30T05:49:12+00:00

[ Upstream commit 05454c1bde91fb013c0431801001da82947e6b5a ]

According to the QCA u-boot source the "PCIE Phase Lock Loop
Configuration (PCIE_PLL_CONFIG)" register is for all SoCs except the
QCA955X and QCA956X at offset 0x10.

Since the PCIE PLL config register is only defined for the AR724x fix
only this value. The value is wrong since the day it was added and isn't
used by any driver yet.

Signed-off-by: Mathias Kresin 
Cc: Ralf Baechle 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16048/
Signed-off-by: James Hogan 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

futex: Remove duplicated code and fix undefined behaviour

2018-05-26T06:48:50+00:00

commit 30d6e0a4190d37740e9447e4e4815f06992dd8c3 upstream.

There is code duplicated over all architecture's headers for
futex_atomic_op_inuser. Namely op decoding, access_ok check for uaddr,
and comparison of the result.

Remove this duplication and leave up to the arches only the needed
assembly which is now in arch_futex_atomic_op_inuser.

This effectively distributes the Will Deacon's arm64 fix for undefined
behaviour reported by UBSAN to all architectures. The fix was done in
commit 5f16a046f8e1 (arm64: futex: Fix undefined behaviour with
FUTEX_OP_OPARG_SHIFT usage). Look there for an example dump.

And as suggested by Thomas, check for negative oparg too, because it was
also reported to cause undefined behaviour report.

Note that s390 removed access_ok check in d12a29703 ("s390/uaccess:
remove pointless access_ok() checks") as access_ok there returns true.
We introduce it back to the helper for the sake of simplicity (it gets
optimized away anyway).

Signed-off-by: Jiri Slaby 
Signed-off-by: Thomas Gleixner 
Acked-by: Russell King 
Acked-by: Michael Ellerman  (powerpc)
Acked-by: Heiko Carstens  [s390]
Acked-by: Chris Metcalf  [for tile]
Reviewed-by: Darren Hart (VMware) 
Reviewed-by: Will Deacon  [core/arm64]
Cc: linux-mips@linux-mips.org
Cc: Rich Felker 
Cc: linux-ia64@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: peterz@infradead.org
Cc: Benjamin Herrenschmidt 
Cc: Max Filippov 
Cc: Paul Mackerras 
Cc: sparclinux@vger.kernel.org
Cc: Jonas Bonn 
Cc: linux-s390@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: Yoshinori Sato 
Cc: linux-hexagon@vger.kernel.org
Cc: Helge Deller 
Cc: "James E.J. Bottomley" 
Cc: Catalin Marinas 
Cc: Matt Turner 
Cc: linux-snps-arc@lists.infradead.org
Cc: Fenghua Yu 
Cc: Arnd Bergmann 
Cc: linux-xtensa@linux-xtensa.org
Cc: Stefan Kristiansson 
Cc: openrisc@lists.librecores.org
Cc: Ivan Kokshaysky 
Cc: Stafford Horne 
Cc: linux-arm-kernel@lists.infradead.org
Cc: Richard Henderson 
Cc: Chris Zankel 
Cc: Michal Simek 
Cc: Tony Luck 
Cc: linux-parisc@vger.kernel.org
Cc: Vineet Gupta 
Cc: Ralf Baechle 
Cc: Richard Kuo 
Cc: linux-alpha@vger.kernel.org
Cc: Martin Schwidefsky 
Cc: linuxppc-dev@lists.ozlabs.org
Cc: "David S. Miller" 
Link: http://lkml.kernel.org/r/20170824073105.3901-1-jslaby@suse.cz
Cc: Ben Hutchings 
Signed-off-by: Greg Kroah-Hartman

MIPS: uaccess: Add micromips clobbers to bzero invocation

2018-04-24T07:32:10+00:00

commit b3d7e55c3f886493235bfee08e1e5a4a27cbcce8 upstream.

The micromips implementation of bzero additionally clobbers registers t7
& t8. Specify this in the clobbers list when invoking bzero.

Fixes: 26c5e07d1478 ("MIPS: microMIPS: Optimise 'memset' core library function.")
Reported-by: James Hogan 
Signed-off-by: Matt Redfearn 
Cc: Ralf Baechle 
Cc: linux-mips@linux-mips.org
Cc:  # 3.10+
Patchwork: https://patchwork.linux-mips.org/patch/19110/
Signed-off-by: James Hogan 
Signed-off-by: Greg Kroah-Hartman

MIPS: kprobes: flush_insn_slot should flush only if probe initialised

2018-04-13T17:50:19+00:00

[ Upstream commit 698b851073ddf5a894910d63ca04605e0473414e ]

When ftrace is used with kprobes, it is possible for a kprobe to contain
an invalid location (ie. only initialised to 0 and not to a specific
location in the code). Trying to perform a cache flush on such location
leads to a crash r4k_flush_icache_range().

Fixes: c1bf207d6ee1 ("MIPS: kprobe: Add support.")
Signed-off-by: Marcin Nowakowski 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16296/
Signed-off-by: Ralf Baechle 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

MIPS: mm: adjust PKMAP location

2018-04-13T17:50:19+00:00

[ Upstream commit c56e7a4c3e77f6fbd9b55c06c14eda65aae58958 ]

Space reserved for PKMap should span from PKMAP_BASE to FIXADDR_START.
For large page sizes this is not the case as eg. for 64k pages the range
currently defined is from 0xfe000000 to 0x102000000(!!) which obviously
isn't right.
Remove the hardcoded location and set the BASE address as an offset from
FIXADDR_START.

Since all PKMAP ptes have to be placed in a contiguous memory, ensure
that this is the case by placing them all in a single page. This is
achieved by aligning the end address to pkmap pages count pages.

Signed-off-by: Marcin Nowakowski 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15950/
Signed-off-by: Ralf Baechle 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

MIPS: End asm function prologue macros with .insn

2017-11-21T08:21:22+00:00

[ Upstream commit 08889582b8aa0bbc01a1e5a0033b9f98d2e11caa ]

When building a kernel targeting a microMIPS ISA, recent GNU linkers
will fail the link if they cannot determine that the target of a branch
or jump is microMIPS code, with errors such as the following:

    mips-img-linux-gnu-ld: arch/mips/built-in.o: .text+0x542c:
    Unsupported jump between ISA modes; consider recompiling with
    interlinking enabled.
    mips-img-linux-gnu-ld: final link failed: Bad value

or:

    ./arch/mips/include/asm/uaccess.h:1017: warning: JALX to a
    non-word-aligned address

Placing anything other than an instruction at the start of a function
written in assembly appears to trigger such errors. In order to prepare
for allowing us to follow function prologue macros with an EXPORT_SYMBOL
invocation, end the prologue macros (LEAD, NESTED & FEXPORT) with a
.insn directive. This ensures that the start of the function is marked
as code, which always makes sense for functions & safely prevents us
from hitting the link errors described above.

Signed-off-by: Paul Burton 
Reviewed-by: Maciej W. Rozycki 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14508/
Signed-off-by: Ralf Baechle 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

MIPS: Fix CM region target definitions

2017-11-15T16:13:12+00:00

commit 6a6cba1d945a7511cdfaf338526871195e420762 upstream.

The default CM target field in the GCR_BASE register is encoded with 0
meaning memory & 1 being reserved. However the definitions we use for
those bits effectively get these two values backwards - likely because
they were copied from the definitions for the CM regions where the
target is encoded differently. This results in use setting up GCR_BASE
with the reserved target value by default, rather than targeting memory
as intended. Although we currently seem to get away with this it's not a
great idea to rely upon.

Fix this by changing our macros to match the documentated target values.

The incorrect encoding became used as of commit 9f98f3dd0c51 ("MIPS: Add
generic CM probe & access code") in the Linux v3.15 cycle, and was
likely carried forwards from older but unused code introduced by
commit 39b8d5254246 ("[MIPS] Add support for MIPS CMP platform.") in the
v2.6.26 cycle.

Fixes: 9f98f3dd0c51 ("MIPS: Add generic CM probe & access code")
Signed-off-by: Paul Burton 
Reported-by: Matt Redfearn 
Reviewed-by: James Hogan 
Cc: Matt Redfearn 
Cc: Ralf Baechle 
Cc: linux-mips@linux-mips.org
Cc:  # v3.15+
Patchwork: https://patchwork.linux-mips.org/patch/17562/
Signed-off-by: James Hogan 
[jhogan@kernel.org: Backported 3.15..4.13]
Signed-off-by: Greg Kroah-Hartman