Pull MIPS updates from Thomas Bogendoerfer:

 - switch gpio code to use swnodes

 - rework of TXX9 gpio code

 - enable multi-vpe for econet

 - cleanups and fixes

* tag 'mips_7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  mips: dts: econet: Describe dual-VPE 34Kc processor
  mips: econet: add multi-vpe capability to EN751221
  MIPS: ptrace: Fix syscall skipping via PTRACE_SYSCALL
  mips: remove dead select
  MIPS: BCM47XX: Convert buttons to software nodes
  ssb: gpio: Add and register software node for GPIO controller
  bcma: gpio: Add and register software node for GPIO controller
  MIPS: ip22-gio: Drop #include of <linux/mod_devicetable.h>
  MIPS: TXX9: Clean up txx9_iocled_init()
  MIPS: TXX9: Convert gpio_txx9 to dynamic GPIO base allocation
  MIPS: TXX9: Drop GPIOLIB_LEGACY select
  MIPS: TXX9: Use GPIO lookup table for iocled LEDs
  MIPS: TXX9: Reduce TXX9_IOCLED_MAXLEDS to 3
  MIPS: TXX9: rbtx4927: Use GPIO lookup table for TXx9 LEDs
  MIPS: TXX9: rbtx4927: Use GPIO lookup table for SIO DTR
  MIPS: TXX9: Remove txx9_7segled_*() forward declarations
  MIPS: TXX9: Remove tx4938_spi_init() and txx9_spi_init()
  MIPS: kernel: proc: Use two seq_putc() calls in show_cpuinfo()

Pull gpio updates from Bartosz Golaszewski:
 "GPIO core:
   - extend the gpio-regmap abstraction layer with more features
     allowing users to override configuration setting, translate
     register values and masks and enable/disable interrupts
   - extend GPIO kunit tests with suites verifying probe ordering by
     software node devlink support and software node hogs
   - shrink GPIO kunit initialization code
   - coding style updates (remove commas from sentinels where
     applicable)
   - with all users now converted treewide to using real firmware node
     links for software node GPIO lookup: remove the deprecated
     label-matching mechanism from from GPIO core
   - drop redundant return value check of nonseekable_open() in
     gpiolib-cdev
   - use IRQ trigger helpers where applicable

  Driver updates:
   - refactor error paths and logging in gpio-nomadik
   - use more modern interfaces for getting resources in gpio-rockchip,
     gpio-bt8xx and gpio-pca9570
   - add missing MODULE_DEVICE_TABLE() to gpio-sifive and gpio-vf610
   - drop unused FILONOFF macro from gpio-rcar
   - extend build coverage of ioport GPIO drivers with COMPILE_TEST=y
   - only enable the gpio-rtd driver by default with ARCH_REALTEK=y to
     avoid bloating the build
   - refactor coding style in several drivers
   - use correct endianess translation in gpio-pcf85x
   - add wake-up interrupt support to gpio-mvebu
   - apply initial value in direction output setter in gpio-by-pinctrl

  Misc:
   - replace linux/gpio.h inclusions treewide with linux/gpio/legacy.h
     which now exports all the deprecated APIs
   - select GPIOLIB_LEGACY in Kconfig where required treewide
   - use software nodes for gpio-keys in MFD drivers

  Devicetree bindings:
   - describe the realtek rtd1625 GPIO controller
   - document new models for gpio-pca95xx and gpio-cadence
   - document new property in gpio-rockchip"

* tag 'gpio-updates-for-v7.3-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (61 commits)
  gpio: gpio-by-pinctrl: Apply initial value in direction output wrapper
  dt-bindings: gpio: rockchip,gpio-bank: Add rockchip,grf property
  gpio: Use IRQ trigger mask helpers
  gpio: allow COMPILE_TEST for IOPORT drivers
  gpio: realtek: Add driver for Realtek DHC RTD1625 SoC
  gpio: regmap: Add IRQ enable/disable helpers
  gpio: regmap: Add set_config callback
  gpio: regmap: Add value_xlate callback
  gpio: regmap: Add gpio_regmap_operation to extend reg_mask_xlate callback
  gpio: regmap: Order kernel-doc descriptions with the actual appearance
  gpio: regmap: Apply default resource callbacks for regmap IRQ chip
  gpio: regmap: Provide default IRQ resource request and release callbacks
  Revert "gpio: realtek: Add driver for Realtek DHC RTD1625 SoC"
  gpib: gpio: replace linux/gpio.h inclusion
  Input: matrix_keyboard - replace linux/gpio.h inclusion
  phy: replace linux/gpio.h inclusions
  pcmcia: replace linux/gpio.h inclusions
  ASoC: replace linux/gpio.h inclusions
  mfd: replace linux/gpio.h inclusions
  sh: replace linux/gpio.h inclusions
  ...

Pull treewide timer related cleanups from Thomas Gleixner:

 - Remove the leftover CLOCK_TICK_RATE which has been scheduled for
   removal more than a decade ago along with some now empty asm/timex.h
   files.

 - Consolidate delay timer calibration

   The construct of having a define in a header requires that
   architectures provided asm/timex.h for no reason. Also the function
   name for reading the delay timer is confusing at best.

   Use a config switch to enable that functionality and rename the
   function to delay_read_timer() to make the purpose clear.

   This removes some more now empty asm/timex.h files as well.

* tag 'timers-cleanups-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  calibrate: Rework delay timer calibration
  treewide: Remove CLOCK_TICK_RATE
  x86: Use PIT_TICK_RATE instead of CLOCK_TICK_RATE

The contended_release tracepoint needs to hook queued_spin_unlock(), but
architectures with a custom unlock define queued_spin_unlock() directly,
leaving no single generic place to add the tracing.

Introduce queued_spin_release() as the arch-overridable release
primitive and make queued_spin_unlock() a generic wrapper around it.
An architecture that only customizes the release can then override
queued_spin_release() and inherit the generic wrapper.

Rename the MIPS override to queued_spin_release() accordingly. x86
paravirt overrides queued_spin_unlock() directly and is left unchanged.

No functional change intended.

Signed-off-by: Dmitry Ilvokhin <d@ilvokhin.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juergen Gross <jgross@suse.com>
Link: https://patch.msgid.link/b8daabae6469ad72cc784a911f6cc43a6d45df3a.1785778551.git.d@ilvokhin.com

gpio: legacy interface cleanups for 7.3

These are the remaining patches for legacy gpio interface
cleanup, ensuring that files referencing them are sure to
have CONFIG_GPIOLIB_LEGACY set, and use linux/gpio/legacy.h
instead of the old linux/gpio.h header.

There are a few more patches already merged in other
branches for 7.3, including soc, led, net and media. Once
everything is in, we can apply the final patches to turn
off CONFIG_GPIOLIB_LEGACY by default and remove the obsolete
header file.

This branch is based on the immutable ib-mfd-legacy-gpio-7.3
branch from mfd.git to avoid a conflict in the rohm drivers.

linux/gpio.h should no longer be used, convert these instead to
either linux/gpio/consumer.h or linux/gpio/legacy.h as needed.

Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

That header doesn't use any device id provided by
<linux/mod_devicetable.h>. Also the users of <asm/gio_device.h> (i.e.
arch/mips/sgi-ip22/ip22-gio.c and drivers/video/console/newport_con.c)
don't use any of them and they compile fine in a mips allmodconfig.

So drop the unused include that only yields unnecessary recompilations
when a device id struct changes.

Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

The sole caller already uses dynamic GPIO base allocation, so drop
support for static allocation.
While at it, drop the no longer used "lowactive" parameter.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Static allocation of GPIO base is deprecated, use dynamic allocation.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

The actual implementation was removed in commit 5a8df9281b052ff3 ("MIPS:
TXX9: Remove rbtx4939 board support").

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>