linux-stable.git/arch/mips/include/asm, branch linux-3.19.y

MIPS: asm: asm-eva: Introduce kernel load/store variants

2015-05-06T20:01:44+00:00

commit 60cd7e08e453bc6828ac4b539f949e4acd80f143 upstream.

Introduce new macros for kernel load/store variants which will be
used to perform regular kernel space load/store operations in EVA
mode.

Signed-off-by: Markos Chandras 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9500/
Signed-off-by: Ralf Baechle 
Signed-off-by: Greg Kroah-Hartman

MIPS: lose_fpu(): Disable FPU when MSA enabled

2015-05-06T20:01:44+00:00

commit acaf6a97d623af123314c2f8ce4cf7254f6b2fc1 upstream.

The lose_fpu() function only disables the FPU in CP0_Status.CU1 if the
FPU is in use and MSA isn't enabled.

This isn't necessarily a problem because KSTK_STATUS(current), the
version of CP0_Status stored on the kernel stack on entry from user
mode, does always get updated and gets restored when returning to user
mode, but I don't think it was intended, and it is inconsistent with the
case of only the FPU being in use. Sometimes leaving the FPU enabled may
also mask kernel bugs where FPU operations are executed when the FPU
might not be enabled.

So lets disable the FPU in the MSA case too.

Fixes: 33c771ba5c5d ("MIPS: save/disable MSA in lose_fpu")
Signed-off-by: James Hogan 
Cc: Ralf Baechle 
Cc: Paul Burton 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9323/
Signed-off-by: Ralf Baechle 
Signed-off-by: Greg Kroah-Hartman

MIPS: KVM: Handle MSA Disabled exceptions from guest

2015-05-06T20:01:44+00:00

commit 98119ad53376885819d93dfb8737b6a9a61ca0ba upstream.

Guest user mode can generate a guest MSA Disabled exception on an MSA
capable core by simply trying to execute an MSA instruction. Since this
exception is unknown to KVM it will be passed on to the guest kernel.
However guest Linux kernels prior to v3.15 do not set up an exception
handler for the MSA Disabled exception as they don't support any MSA
capable cores. This results in a guest OS panic.

Since an older processor ID may be being emulated, and MSA support is
not advertised to the guest, the correct behaviour is to generate a
Reserved Instruction exception in the guest kernel so it can send the
guest process an illegal instruction signal (SIGILL), as would happen
with a non-MSA-capable core.

Fix this as minimally as reasonably possible by preventing
kvm_mips_check_privilege() from relaying MSA Disabled exceptions from
guest user mode to the guest kernel, and handling the MSA Disabled
exception by emulating a Reserved Instruction exception in the guest,
via a new handle_msa_disabled() KVM callback.

Signed-off-by: James Hogan 
Cc: Paolo Bonzini 
Cc: Paul Burton 
Cc: Ralf Baechle 
Cc: Gleb Natapov 
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman

MIPS: HTW: Prevent accidental HTW start due to nested htw_{start, stop}

2015-03-06T22:57:37+00:00

commit ed4cbc81addbc076b016c5b979fd1a02f0897f0a upstream.

activate_mm() and switch_mm() call get_new_mmu_context() which in turn
can enable the HTW before the entryhi is changed with the new ASID.
Since the latter will enable the HTW in local_flush_tlb_all(),
then there is a small timing window where the HTW is running with the
new ASID but with an old pgd since the TLBMISS_HANDLER_SETUP_PGD
hasn't assigned a new one yet. In order to prevent that, we introduce a
simple htw counter to avoid starting HTW accidentally due to nested
htw_{start,stop}() sequences. Moreover, since various IPI calls can
enforce TLB flushing operations on a different core, such an operation
may interrupt another htw_{stop,start} in progress leading inconsistent
updates of the htw_seq variable. In order to avoid that, we disable the
interrupts whenever we update that variable.

Signed-off-by: Markos Chandras 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9118/
Signed-off-by: Ralf Baechle 
Signed-off-by: Greg Kroah-Hartman

MIPS: asm: pgtable: Prevent HTW race when updating PTEs

2015-03-06T22:57:28+00:00

commit fde3538a8a711aedf1173ecb2d45aed868f51c97 upstream.

Whenever we modify a page table entry, we need to ensure that the HTW
will not fetch a stable entry. And for that to happen we need to ensure
that HTW is stopped before we modify the said entry otherwise the HTW
may already be in the process of reading that entry and fetching the
old information. As a result of which, we replace the htw_reset() calls
with htw_{stop,start} in more appropriate places. This also removes the
remaining users of htw_reset() and as a result we drop that macro

Signed-off-by: Markos Chandras 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9116/
Signed-off-by: Ralf Baechle 
Signed-off-by: Greg Kroah-Hartman

MIPS: asm: pgtable: Add c0 hazards on HTW start/stop sequences

2015-03-06T22:57:28+00:00

commit 461d1597ffad7a826f8aaa63ab0727c37b632e34 upstream.

When we use htw_{start,stop}() outside of htw_reset(), we need
to ensure that c0 changes have been propagated properly before
we attempt to continue with subsequence memory operations.

Signed-off-by: Markos Chandras 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9114/
Signed-off-by: Ralf Baechle 
Signed-off-by: Greg Kroah-Hartman

MIPS: asm: asmmacro: Replace "add" instructions with "addu"

2015-03-06T22:57:28+00:00

commit 98a833c1fa4de0695830f77b2d13fd86693da298 upstream.

The "add" instruction is actually a macro in binutils and depending on
the size of the immediate it can expand to an "addi" instruction.
However, the "addi" instruction traps on overflows which is not
something we want on address calculation.

Link: http://www.linux-mips.org/archives/linux-mips/2015-01/msg00121.html
Cc: Paul Burton 
Cc: Maciej W. Rozycki 
Signed-off-by: Markos Chandras 
Signed-off-by: Greg Kroah-Hartman

MIPS: Fix syscall_get_nr for the syscall exit tracing.

2015-02-04T15:40:09+00:00

Register 2 is alredy overwritten by the return value when
syscall_trace_leave() is called.

Signed-off-by: Lars Persson 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9187/
Signed-off-by: Ralf Baechle

MIPS: mipsregs.h: Add write_32bit_cp1_register()

2015-01-30T22:04:59+00:00

Add a write_32bit_cp1_register() macro to compliment the
read_32bit_cp1_register() macro. This is to abstract whether .set
hardfloat needs to be used based on GAS_HAS_SET_HARDFLOAT.

The implementation of _read_32bit_cp1_register() .sets mips1 due to
failure of gas v2.19 to assemble cfc1 for Octeon (see commit
25c300030016 ("MIPS: Override assembler target architecture for
octeon.")). I haven't copied this over to _write_32bit_cp1_register() as
I'm uncertain whether it applies to ctc1 too, or whether anybody cares
about that version of binutils any longer.

Signed-off-by: James Hogan 
Cc: Ralf Baechle 
Cc: Paul Burton 
Cc: David Daney 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9172/
Signed-off-by: Ralf Baechle

MIPS: ARC: Fix build error.

2015-01-19T12:09:52+00:00

[...]
 struct component {
        ^
In file included from ./arch/mips/include/asm/sn/klconfig.h:58:0,
                 from ./arch/mips/include/asm/sn/module.h:12,
                 from ./arch/mips/include/asm/sn/node.h:8,
                 from ./arch/mips/include/asm/mach-ip35/mmzone.h:4,
                 from ./arch/mips/include/asm/mmzone.h:9,
                 from ./arch/mips/include/asm/mach-ip35/topology.h:7,
                 from ./arch/mips/include/asm/topology.h:11,
                 from include/linux/topology.h:35,
                 from include/linux/gfp.h:8,
                 from include/linux/device.h:29,
                 from drivers/base/component.c:14:
./arch/mips/include/asm/fw/arc/hinv.h:122:16: note: originally defined here
 typedef struct component {
                ^
make[2]: *** [drivers/base/component.o] Error 1
make[2]: Target `__build' not remade because of errors.
make[1]: *** [drivers/base] Error 2
make[1]: Target `__build' not remade because of errors.

Fix by using an nameless struct definition in the COMPONENT definition.
Which is what the ARC spec uses anyway.  While at it, do the same thing
for two other typedefs.

Signed-off-by: Ralf Baechle