linux-stable.git/arch/mips/include/asm, branch linux-2.6.34.y

MIPS: Quit using undefined behavior of ADDU in 64-bit atomic operations.

2011-01-06T23:08:05+00:00

commit f2a68272d799bf4092443357142f63b74f7669a1 upstream.

For 64-bit, we must use DADDU and DSUBU.

Signed-off-by: David Daney 
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1483/
Signed-off-by: Ralf Baechle 
Signed-off-by: Paul Gortmaker

compat: Make compat_alloc_user_space() incorporate the access_ok()

2011-01-06T23:07:49+00:00

commit c41d68a513c71e35a14f66d71782d27a79a81ea6 upstream.

compat_alloc_user_space() expects the caller to independently call
access_ok() to verify the returned area.  A missing call could
introduce problems on some architectures.

This patch incorporates the access_ok() check into
compat_alloc_user_space() and also adds a sanity check on the length.
The existing compat_alloc_user_space() implementations are renamed
arch_compat_alloc_user_space() and are used as part of the
implementation of the new global function.

This patch assumes NULL will cause __get_user()/__put_user() to either
fail or access userspace on all architectures.  This should be
followed by checking the return value of compat_access_user_space()
for NULL in the callers, at which time the access_ok() in the callers
can also be removed.

Reported-by: Ben Hawkes 
Signed-off-by: H. Peter Anvin 
Acked-by: Benjamin Herrenschmidt 
Acked-by: Chris Metcalf 
Acked-by: David S. Miller 
Acked-by: Ingo Molnar 
Acked-by: Thomas Gleixner 
Acked-by: Tony Luck 
Cc: Andrew Morton 
Cc: Arnd Bergmann 
Cc: Fenghua Yu 
Cc: H. Peter Anvin 
Cc: Heiko Carstens 
Cc: Helge Deller 
Cc: James Bottomley 
Cc: Kyle McMartin 
Cc: Martin Schwidefsky 
Cc: Paul Mackerras 
Cc: Ralf Baechle 
Signed-off-by: Paul Gortmaker

MIPS FPU emulator: allow Cause bits of FCSR to be writeable by ctc1

2010-05-15T20:59:53+00:00

    
    In the FPU emulator code of the MIPS, the Cause bits of the FCSR register
    are not currently writeable by the ctc1 instruction.  In odd corner cases,
    this can cause problems.  For example, a case existed where a divide-by-zero
    exception was generated by the FPU, and the signal handler attempted to
    restore the FPU registers to their state before the exception occurred.  In
    this particular setup, writing the old value to the FCSR register would
    cause another divide-by-zero exception to occur immediately.  The solution
    is to change the ctc1 instruction emulator code to allow the Cause bits of
    the FCSR register to be writeable.  This is the behaviour of the hardware
    that the code is emulating.
    
    This problem was found by Shane McDonald, but the credit for the fix goes
    to Kevin Kissell.  In Kevin's words:
    
    I submit that the bug is indeed in that ctc_op:  case of the emulator.  The
    Cause bits (17:12) are supposed to be writable by that instruction, but the
    CTC1 emulation won't let them be updated by the instruction.  I think that
    actually if you just completely removed lines 387-388 [...] things would
    work a good deal better.  At least, it would be a more accurate emulation of
    the architecturally defined FPU.  If I wanted to be really, really pedantic
    (which I sometimes do), I'd also protect the reserved bits that aren't
    necessarily writable.
    
    Signed-off-by: Shane McDonald 
    To: anemo@mba.ocn.ne.jp
    To: kevink@paralogos.com
    To: sshtylyov@mvista.com
    Patchwork: http://patchwork.linux-mips.org/patch/1205/
    Signed-off-by: Ralf Baechle 

---

MIPS: Loongson-2F: Use CONFIG_CPU_JUMP_WORKAROUNDS to control workarounds.

2010-04-30T19:52:58+00:00

Signed-off-by: Wu Zhangjin 
Cc: linux-mips 
Patchwork: http://patchwork.linux-mips.org/patch/1106/
Signed-off-by: Ralf Baechle

MIPS: Loongson: Fix LOONGSON_ADDRWIN_CFG macro.

2010-04-30T19:52:51+00:00

There's a typo in the LOONGSON_ADDRWIN_CFG macro. The cpu window mmap
register address should contain the destination parameters not the
source one.  This has not been noticed because the code is only using
source = destination.

Signed-off-by: Arnaud Patard 
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1162/
Signed-off-by: Ralf Baechle

MIPS: Add uasm_i_dsrl_safe() and uasm_i_dsll_safe() to uasm.

2010-04-30T19:52:45+00:00

This allows us to clean up the code by not having to explicitly code
checks for shift amounts greater than 32.

Signed-off-by: David Daney 
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1153/
Signed-off-by: Ralf Baechle

MIPS: die() does not call die notifier chain

2010-04-30T19:52:45+00:00

The MIPS implementation of die() forgets to call notify_die() and thus notifiers
registered via register_die_notifier() are not called.  This results in kgdb not
being activated on exceptions.

The only subtlety is that notify_die declares its regs argument w/o const, so
the const had to be removed from mips die() as well.

[Ralf: Fixed build error for SGI IP22 and IP28 platforms.]

Signed-off-by: Yury Polyanskiy 
Cc: linux-mips@linux-mips.org
Patchworks: http://patchwork.linux-mips.org/patch/1142/
Acked-by: Jason Wessel 
Signed-off-by: Ralf Baechle 

---

MIPS: cmpxchg.h: Fix excessive indentation.

2010-04-30T19:52:41+00:00

Signed-off-by: Ralf Baechle

MIPS: Don't vmap things at address zero.

2010-04-30T19:52:41+00:00

In the 64-bit kernel we use swapper_pg_dir for three different things.

1) xuseg mappings for kernel threads.

2) vmap mappings for all kernel-space accesses in xkseg.

3) vmap mappings for kernel modules in ksseg (kseg2).

Due to how the TLB refill handlers work, any mapping established in
xkseg or ksseg will also establish a xuseg mapping that should never
be used by the kernel.

In order to be able to use exceptions to trap NULL pointer
dereferences, we need to ensure that nothing is mapped at address
zero.  Since vmap mappings in xkseg are reflected in xuseg, this means
we need to ensure that there are no vmap mappings established at the
start of xkseg.  So we move back VMALLOC_START to avoid establishing
vmap mappings at the start of xkseg.

Signed-off-by: David Daney 
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1129/
Signed-off-by: Ralf Baechle

MIPS: uasm: Add OR instruction.

2010-04-12T16:26:20+00:00

This is needed for the fix of the M3 workaround.

Signed-off-by: Ralf Baechle