linux-stable.git/arch/mips/include/asm/processor.h, branch linux-4.3.y

MIPS: Set trap_no field in thread_struct on exception.

2015-09-03T10:08:04+00:00

This reverts commit 7281cd22973008a782860e48ed8d85d00204168c and adds
actual functionality to use the field.

MIPS: MSA: Fix big-endian FPR_IDX implementation

2015-03-27T18:42:48+00:00

The maximum word size is 64-bits since MSA state is saved using st.d
which stores two 64-bit words, therefore reimplement FPR_IDX using xor,
and only within each 64-bit word.

Signed-off-by: James Hogan 
Signed-off-by: Paul Burton 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9169/
Signed-off-by: Ralf Baechle

MIPS: OCTEON: Save and restore CP2 SHA3 state

2015-02-20T14:29:08+00:00

Allocate new save space, and then save/restore the registers if
OCTEON III.

Signed-off-by: David Daney 
Signed-off-by: Aleksey Makarov 
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8935/
Signed-off-by: Ralf Baechle

MIPS: Remove unneeded #ifdef KERNEL from asm/processor.h

2015-02-20T13:14:52+00:00

Signed-off-by: David Daney 
Signed-off-by: Aleksey Makarov 
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8737/
Signed-off-by: Ralf Baechle

MIPS,prctl: add PR_[GS]ET_FP_MODE prctl options for MIPS

2015-02-12T11:30:29+00:00

Userland code may be built using an ABI which permits linking to objects
that have more restrictive floating point requirements. For example,
userland code may be built to target the O32 FPXX ABI. Such code may be
linked with other FPXX code, or code built for either one of the more
restrictive FP32 or FP64. When linking with more restrictive code, the
overall requirement of the process becomes that of the more restrictive
code. The kernel has no way to know in advance which mode the process
will need to be executed in, and indeed it may need to change during
execution. The dynamic loader is the only code which will know the
overall required mode, and so it needs to have a means to instruct the
kernel to switch the FP mode of the process.

This patch introduces 2 new options to the prctl syscall which provide
such a capability. The FP mode of the process is represented as a
simple bitmask combining a number of mode bits mirroring those present
in the hardware. Userland can either retrieve the current FP mode of
the process:

  mode = prctl(PR_GET_FP_MODE);

or modify the current FP mode of the process:

  err = prctl(PR_SET_FP_MODE, new_mode);

Signed-off-by: Paul Burton 
Cc: Matthew Fortune 
Cc: Markos Chandras 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8899/
Signed-off-by: Ralf Baechle

sched, mips, ia64: Remove __ARCH_WANT_UNLOCKED_CTXSW

2014-09-24T12:47:05+00:00

Kirill found that there's a subtle race in the
__ARCH_WANT_UNLOCKED_CTXSW code, and instead of fixing it, remove the
entire exception because neither arch that uses it seems to actually
still require it.

Boot tested on mips64el (qemu) only.

Signed-off-by: Peter Zijlstra (Intel) 
Reviewed-by: Kirill Tkhai 
Cc: Andrew Morton 
Cc: Davidlohr Bueso 
Cc: Fenghua Yu 
Cc: James Hogan 
Cc: Kees Cook 
Cc: Linus Torvalds 
Cc: Paul Burton 
Cc: Qais Yousef 
Cc: Ralf Baechle 
Cc: Tony Luck 
Cc: oleg@redhat.com
Cc: linux@roeck-us.net
Cc: linux-ia64@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Link: http://lkml.kernel.org/r/20140923150641.GH3312@worktop.programming.kicks-ass.net
Signed-off-by: Ingo Molnar

Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

2014-08-07T15:47:00+00:00

Pull MIPS updates from Ralf Baechle:
 "This is the main pull request for 3.17.  It contains:

   - misc Cavium Octeon, BCM47xx, BCM63xx and Alchemy  updates
   - MIPS ptrace updates and cleanups
   - various fixes that will also go to -stable
   - a number of cleanups and small non-critical fixes.
   - NUMA support for the Loongson 3.
   - more support for MSA
   - support for MAAR
   - various FP enhancements and fixes"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (139 commits)
  MIPS: jz4740: remove unnecessary null test before debugfs_remove
  MIPS: Octeon: remove unnecessary null test before debugfs_remove_recursive
  MIPS: ZBOOT: implement stack protector in compressed boot phase
  MIPS: mipsreg: remove duplicate MIPS_CONF4_FTLBSETS_SHIFT
  MIPS: Bonito64: remove a duplicate define
  MIPS: Malta: initialise MAARs
  MIPS: Initialise MAARs
  MIPS: detect presence of MAARs
  MIPS: define MAAR register accessors & bits
  MIPS: mark MSA experimental
  MIPS: Don't build MSA support unless it can be used
  MIPS: consistently clear MSA flags when starting & copying threads
  MIPS: 16 byte align MSA vector context
  MIPS: disable preemption whilst initialising MSA
  MIPS: ensure MSA gets disabled during boot
  MIPS: fix read_msa_* & write_msa_* functions on non-MSA toolchains
  MIPS: fix MSA context for tasks which don't use FP first
  MIPS: init upper 64b of vector registers when MSA is first used
  MIPS: save/disable MSA in lose_fpu
  MIPS: preserve scalar FP CSR when switching vector context
  ...

MIPS: 16 byte align MSA vector context

2014-08-01T22:06:44+00:00

The MSA specification upon first read appears to suggest that it is safe
to perform vector loads & stores with arbitrary alignment. However it
leaves provision for "address-dependent exceptions"... Align the vector
context to a 16 byte boundary to ensure that the kernel cannot cause any
such exceptions.

Note that the fpu field of struct thread_struct was already at a 16 byte
boundary within the struct, the introduction of FPU_ALIGN simply makes
the requirement explicit. The only part of this impacting the generated
kernel binary is ARCH_MIN_TASKALIGN.

Signed-off-by: Paul Burton 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/7308/
Signed-off-by: Ralf Baechle

arch, locking: Ciao arch_mutex_cpu_relax()

2014-07-17T10:32:47+00:00

The arch_mutex_cpu_relax() function, introduced by 34b133f, is
hacky and ugly. It was added a few years ago to address the fact
that common cpu_relax() calls include yielding on s390, and thus
impact the optimistic spinning functionality of mutexes. Nowadays
we use this function well beyond mutexes: rwsem, qrwlock, mcs and
lockref. Since the macro that defines the call is in the mutex header,
any users must include mutex.h and the naming is misleading as well.

This patch (i) renames the call to cpu_relax_lowlatency  ("relax, but
only if you can do it with very low latency") and (ii) defines it in
each arch's asm/processor.h local header, just like for regular cpu_relax
functions. On all archs, except s390, cpu_relax_lowlatency is simply cpu_relax,
and thus we can take it out of mutex.h. While this can seem redundant,
I believe it is a good choice as it allows us to move out arch specific
logic from generic locking primitives and enables future(?) archs to
transparently define it, similarly to System Z.

Signed-off-by: Davidlohr Bueso 
Signed-off-by: Peter Zijlstra 
Cc: Andrew Morton 
Cc: Anton Blanchard 
Cc: Aurelien Jacquiot 
Cc: Benjamin Herrenschmidt 
Cc: Bharat Bhushan 
Cc: Catalin Marinas 
Cc: Chen Liqin 
Cc: Chris Metcalf 
Cc: Christian Borntraeger 
Cc: Chris Zankel 
Cc: David Howells 
Cc: David S. Miller 
Cc: Deepthi Dharwar 
Cc: Dominik Dingel 
Cc: Fenghua Yu 
Cc: Geert Uytterhoeven 
Cc: Guan Xuetao 
Cc: Haavard Skinnemoen 
Cc: Hans-Christian Egtvedt 
Cc: Heiko Carstens 
Cc: Helge Deller 
Cc: Hirokazu Takata 
Cc: Ivan Kokshaysky 
Cc: James E.J. Bottomley 
Cc: James Hogan 
Cc: Jason Wang 
Cc: Jesper Nilsson 
Cc: Joe Perches 
Cc: Jonas Bonn 
Cc: Joseph Myers 
Cc: Kees Cook 
Cc: Koichi Yasutake 
Cc: Lennox Wu 
Cc: Linus Torvalds 
Cc: Mark Salter 
Cc: Martin Schwidefsky 
Cc: Matt Turner 
Cc: Max Filippov 
Cc: Michael Neuling 
Cc: Michal Simek 
Cc: Mikael Starvik 
Cc: Nicolas Pitre 
Cc: Paolo Bonzini 
Cc: Paul Burton 
Cc: Paul E. McKenney 
Cc: Paul Gortmaker 
Cc: Paul Mackerras 
Cc: Qais Yousef 
Cc: Qiaowei Ren 
Cc: Rafael Wysocki 
Cc: Ralf Baechle 
Cc: Richard Henderson 
Cc: Richard Kuo 
Cc: Russell King 
Cc: Steven Miao 
Cc: Steven Rostedt 
Cc: Stratos Karafotis 
Cc: Tim Chen 
Cc: Tony Luck 
Cc: Vasily Kulikov 
Cc: Vineet Gupta 
Cc: Vineet Gupta 
Cc: Waiman Long 
Cc: Will Deacon 
Cc: Wolfram Sang 
Cc: adi-buildroot-devel@lists.sourceforge.net
Cc: linux390@de.ibm.com
Cc: linux-alpha@vger.kernel.org
Cc: linux-am33-list@redhat.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-c6x-dev@linux-c6x.org
Cc: linux-cris-kernel@axis.com
Cc: linux-hexagon@vger.kernel.org
Cc: linux-ia64@vger.kernel.org
Cc: linux@lists.openrisc.net
Cc: linux-m32r-ja@ml.linux-m32r.org
Cc: linux-m32r@ml.linux-m32r.org
Cc: linux-m68k@lists.linux-m68k.org
Cc: linux-metag@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-parisc@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-s390@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: linux-xtensa@linux-xtensa.org
Cc: sparclinux@vger.kernel.org
Link: http://lkml.kernel.org/r/1404079773.2619.4.camel@buesod1.americas.hpqcorp.net
Signed-off-by: Ingo Molnar

MIPS: Basic MSA context switching support

2014-03-26T22:09:10+00:00

This patch adds support for context switching the MSA vector registers.
These 128 bit vector registers are aliased with the FP registers - an
FP register accesses the least significant bits of the vector register
with which it is aliased (ie. the register with the same index). Due to
both this & the requirement that the scalar FPU must be 64-bit (FR=1) if
enabled at the same time as MSA the kernel will enable MSA & scalar FP
at the same time for tasks which use MSA. If we restore the MSA vector
context then we might as well enable the scalar FPU since the reason it
was left disabled was to allow for lazy FP context restoring - but we
just restored the FP context as it's a subset of the vector context. If
we restore the FP context and have previously used MSA then we have to
restore the whole vector context anyway (see comment in
enable_restore_fp_context for details) so similarly we might as well
enable MSA.

Thus if a task does not use MSA then it will continue to behave as
without this patch - the scalar FP context will be saved & restored as
usual. But if a task executes an MSA instruction then it will save &
restore the vector context forever more.

Signed-off-by: Paul Burton 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/6431/
Signed-off-by: Ralf Baechle