This allows the kernel to correctly detect an R16000 MIPS CPU on systems that have those. Otherwise, such systems will detect the CPU as an R14000, due to similarities in the CPU PRId value. Signed-off-by: Joshua Kinard <kumba@gentoo.org> Cc: Linux MIPS List <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/9092/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Add architectural definitions and probing for the MIPS Common Device Memory Map (CDMM) region. When supported and enabled at a particular physical address, this region allows some number of per-CPU devices to be discovered and controlled via MMIO. A bit exists in Config3 to determine whether the feature is present, and a CDMMBase CP0 register allows the region to be enabled at a particular physical address. [ralf@linux-mips.org: Sort conflict with other patches.] Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9178/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Add support for extended physical addressing (XPA) so that
32-bit platforms can access equal to or greater than 40 bits
of physical addresses.
NOTE:
1) XPA and EVA are not the same and cannot be used
simultaneously.
2) If you configure your kernel for XPA, the PTEs
and all address sizes become 64-bit.
3) Your platform MUST have working HIGHMEM support.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9355/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The LLBIT (bit 4) in the Config5 CP0 register indicates the software availability of the Load-Linked bit. This bit is only set by hardware and it has the following meaning: 0: LLB functionality is not supported 1: LLB functionality is supported. The following feature are also supported: - ERETNC instruction. Similar to ERET but it does not clear the LLB bit in the LLAddr register. - CP0 LLAddr/LLB bit must be set - LLbit is software accessible through the LLAddr[0] This will be used later on to emulate R2 LL/SC instructions. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Add MIPS R6 to the ISA definitions Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Latest versions of QEMU added support for mips32r6-generic and mips64r6-generic cpu types so add related definitions in preparation of MIPS R6 support. This is also used for QEMU R2 generic cpus. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
This is a dual core (quad thread) BMIPS5000. It needs a little extra code to boot the second core (CPU2/CPU3), but for now we can treat it the same as a single core BMIPS5000. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: mbizon@freebox.fr Cc: jogo@openwrt.org Cc: jfraser@broadcom.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8166/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Detect the presence of the Config5 FRE & UFE bits, as indicated by the FREP bit in FPIR. Record this as a CPU option bit, and provide a cpu_has_fre macro to ease checking of that option bit. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7678/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Detect the presence of MAAR using the MRP bit in Config5, and record that presence using a CPU option bit. A cpu_has_maar macro will then allow code to conditionalise upon the presence of MAARs. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7330/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>