linux-stable.git/arch/mips/boot, branch v6.17

mips: lantiq: xway: sysctrl: rename the etop node

2025-08-22T20:03:21+00:00

Bindig requires a node name matching ‘^ethernet@[0-9a-f]+$’. This patch
changes the clock name from “etop” to “ethernet”.

This fixes the following warning:
arch/mips/boot/dts/lantiq/danube_easy50712.dtb: etop@e180000 (lantiq,etop-xway): $nodename:0: 'etop@e180000' does not match '^ethernet@[0-9a-f]+$'
	from schema $id: http://devicetree.org/schemas/net/lantiq,etop-xway.yaml#

Fixes: dac0bad93741 ("dt-bindings: net: lantiq,etop-xway: Document Lantiq Xway ETOP bindings")
Signed-off-by: Aleksander Jan Bajkowski 
Acked-by: Jakub Kicinski

mips: dts: lantiq: danube: add missing burst length property

2025-08-22T20:03:21+00:00

The upstream dts lacks the lantiq,{rx/tx}-burst-length property. Other
issues were also fixed:
arch/mips/boot/dts/lantiq/danube_easy50712.dtb: etop@e180000 (lantiq,etop-xway): 'interrupt-names' is a required property
	from schema $id: http://devicetree.org/schemas/net/lantiq,etop-xway.yaml#
arch/mips/boot/dts/lantiq/danube_easy50712.dtb: etop@e180000 (lantiq,etop-xway): 'lantiq,tx-burst-length' is a required property
	from schema $id: http://devicetree.org/schemas/net/lantiq,etop-xway.yaml#
arch/mips/boot/dts/lantiq/danube_easy50712.dtb: etop@e180000 (lantiq,etop-xway): 'lantiq,rx-burst-length' is a required property
	from schema $id: http://devicetree.org/schemas/net/lantiq,etop-xway.yaml#

Fixes: 14d4e308e0aa ("net: lantiq: configure the burst length in ethernet drivers")
Signed-off-by: Aleksander Jan Bajkowski 
Acked-by: Jakub Kicinski

Merge tag 'mips_6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

2025-07-31T18:08:55+00:00

Pull MIPS updates from Thomas Bogendoerfer:

 - DT updates for ralink, mobileye and atheros/qualcomm

 - Clean up of mc146818 usage

 - Speed up delay calibration for CPS

 - Other cleanups and fixes

* tag 'mips_6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (50 commits)
  MIPS: Don't use %pK through printk
  MIPS: Update Joshua Kinard's e-mail address
  MIPS: mobileye: dts: eyeq5,eyeq6h: rename the emmc controller
  MIPS: mm: tlb-r4k: Uniquify TLB entries on init
  MIPS: SGI-IP27: Delete an unnecessary check before kfree() in hub_domain_free()
  mips/malta,loongson2ef: use generic mc146818_get_time function
  mips: remove redundant macro mc146818_decode_year
  mips/mach-rm: remove custom mc146818rtc.h file
  mips: remove unused function mc146818_set_rtc_mmss
  MIPS: CPS: Optimise delay CPU calibration for SMP
  MIPS: CPS: Improve mips_cps_first_online_in_cluster()
  MIPS: disable MMID when not supported by the hardware
  MIPS: eyeq5_defconfig: add I2C subsystem, driver and temp sensor driver
  MIPS: eyeq5_defconfig: add GPIO subsystem & driver
  MIPS: mobileye: eyeq5: add two GPIO bank nodes
  MIPS: mobileye: eyeq5: add evaluation board I2C temp sensor
  MIPS: mobileye: eyeq5: add 5 I2C controller nodes
  MIPS: eyeq5_defconfig: Update for v6.16-rc1
  MIPS: vpe-mt: add missing prototypes for vpe_{alloc,start,stop,free}
  mips: boot: use 'targets' instead of extra-y in Makefile
  ...

MIPS: mobileye: dts: eyeq5,eyeq6h: rename the emmc controller

2025-07-28T07:56:41+00:00

The name should match the pattern defined in the mmc-controller binding.

Reported-by: kernel test robot 
Closes: https://lore.kernel.org/oe-kbuild-all/202507220336.JhvVLL7k-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202507220215.wVoUMK5B-lkp@intel.com/
Signed-off-by: Benoît Monin 
Reviewed-by: Krzysztof Kozlowski 
Signed-off-by: Thomas Bogendoerfer

MIPS: dts: ralink: mt7620a: add wifi

2025-07-23T10:29:08+00:00

MT7620A devices all contain a wifi device as part of the SOC. Add it
here to get it working.

Signed-off-by: Rosen Penev 
Reviewed-by: Sergio Paracuellos 
Link: https://patch.msgid.link/20250722212856.11343-7-rosenp@gmail.com
Signed-off-by: Johannes Berg

MIPS: mobileye: eyeq5: add two GPIO bank nodes

2025-07-16T16:33:18+00:00

This platform uses the same GPIO controller as Nomadik. It however has
its own pinconf & pinmux controller. EyeQ5 is the first platform to use
gpio-nomadik independently from pinctrl-nomadik.

Signed-off-by: Théo Lebrun 
Acked-by: Gregory CLEMENT 
Signed-off-by: Thomas Bogendoerfer

MIPS: mobileye: eyeq5: add evaluation board I2C temp sensor

2025-07-16T16:30:50+00:00

Declare the temperature sensor on I2C bus 2. Its label is the schematics
identifier.

Acked-by: Linus Walleij 
Acked-by: Andi Shyti 
Signed-off-by: Théo Lebrun 
Acked-by: Gregory CLEMENT 
Signed-off-by: Thomas Bogendoerfer

MIPS: mobileye: eyeq5: add 5 I2C controller nodes

2025-07-16T16:30:45+00:00

Add the SoC I2C controller nodes to the platform devicetree. Use a
default bus frequency of 400kHz. They are AMBA devices that are matched
on PeriphID.

Set transfer timeout to 10ms instead of Linux's default of 200ms.

Acked-by: Linus Walleij 
Acked-by: Andi Shyti 
Signed-off-by: Théo Lebrun 
Acked-by: Gregory CLEMENT 
Signed-off-by: Thomas Bogendoerfer

mips: boot: use 'targets' instead of extra-y in Makefile

2025-07-03T10:35:11+00:00

vmlinux.bin.* files are built as prerequisites of other objects.
There is no need to use extra-y, which is planned for deprecation.

Signed-off-by: Masahiro Yamada 
Signed-off-by: Thomas Bogendoerfer

mips: dts: qca: add wmac support

2025-07-03T10:35:11+00:00

Now that OF ahb support was added to the ath9k driver, we can use it to
enable and use the SoC wireless found in these chipsets.

Signed-off-by: Rosen Penev 
Reviewed-by: Krzysztof Kozlowski 
Signed-off-by: Thomas Bogendoerfer