Since 5.12-rc1, the Device Tree blob must now be properly aligned.

Therefore, the decompress routine must be careful to copy the blob at
the next aligned address after the kernel image.

This commit fixes the kernel sometimes not booting with a Device Tree
blob appended to it.

Fixes: 79edff12060f ("scripts/dtc: Update to upstream version v1.6.0-51-g183df9e9c2b9")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Pull MIPS updates from Thomas Bogendoerfer:

 - added support for Nintendo N64

 - added support for Realtek RTL83XX SoCs

 - kaslr support for Loongson64

 - first steps to get rid of set_fs()

 - DMA runtime coherent/non-coherent selection cleanup

 - cleanups and fixes

* tag 'mips_5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (98 commits)
  Revert "MIPS: Add basic support for ptrace single step"
  vmlinux.lds.h: catch more UBSAN symbols into .data
  MIPS: kernel: Drop kgdb_call_nmi_hook
  MAINTAINERS: Add git tree for KVM/mips
  MIPS: Use common way to parse elfcorehdr
  MIPS: Simplify EVA cache handling
  Revert "MIPS: kernel: {ftrace,kgdb}: Set correct address limit for cache flushes"
  MIPS: remove CONFIG_DMA_PERDEV_COHERENT
  MIPS: remove CONFIG_DMA_MAYBE_COHERENT
  driver core: lift dma_default_coherent into common code
  MIPS: refactor the runtime coherent vs noncoherent DMA indicators
  MIPS/alchemy: factor out the DMA coherent setup
  MIPS/malta: simplify plat_setup_iocoherency
  MIPS: Add basic support for ptrace single step
  MAINTAINERS: replace non-matching patterns for loongson{2,3}
  MIPS: Make check condition for SDBBP consistent with EJTAG spec
  mips: Replace lkml.org links with lore
  Revert "MIPS: microMIPS: Fix the judgment of mm_jr16_op and mm_jalr_op"
  MIPS: crash_dump.c: Simplify copy_oldmem_page()
  Revert "mips: Manually call fdt_init_reserved_mem() method"
  ...

Commit 1e35918ad9d1 ("MIPS: Enable Undefined Behavior Sanitizer
UBSAN") added a possibility to build the entire kernel with UBSAN
instrumentation for MIPS, with the exception for VDSO.
However, self-extracting head wasn't been added to exceptions, so
this occurs:

mips-alpine-linux-musl-ld: arch/mips/boot/compressed/decompress.o:
in function `FSE_buildDTable_wksp':
decompress.c:(.text.FSE_buildDTable_wksp+0x278): undefined reference
to `__ubsan_handle_shift_out_of_bounds'
mips-alpine-linux-musl-ld: decompress.c:(.text.FSE_buildDTable_wksp+0x2a8):
undefined reference to `__ubsan_handle_shift_out_of_bounds'
mips-alpine-linux-musl-ld: decompress.c:(.text.FSE_buildDTable_wksp+0x2c4):
undefined reference to `__ubsan_handle_shift_out_of_bounds'
mips-alpine-linux-musl-ld: arch/mips/boot/compressed/decompress.o:
decompress.c:(.text.FSE_buildDTable_raw+0x9c): more undefined references
to `__ubsan_handle_shift_out_of_bounds' follow

Add UBSAN_SANITIZE := n to mips/boot/compressed/Makefile to exclude
it from instrumentation scope and fix this issue.

Fixes: 1e35918ad9d1 ("MIPS: Enable Undefined Behavior Sanitizer UBSAN")
Cc: stable@vger.kernel.org # 5.0+
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Signed-off-by: Bert Vermeulen <bert@biot.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

The RTL838x/839x family of SoCs are Realtek switches with an embedded
MIPS core.

* RTL838x - 500MHz 4kce single core - 1Gbit ports and L2 features
* RTL839x - 700MHz 34Kc single core - 1Gbit ports and L2 features

These switches, depending on the exact part number, will have anywhere
between 8 and 52 ports. The MIPS core is wired to a switch cpu port which
has a tagging feature allowing us to make use of the DSA subsystem.
The SoCs are somewhat basic in certain areas, getting better with more
advanced features on newer series.

The switch functionality is MMIO-mapped via a large MFD region.

The SoCs have the following peripherals
* ethernet
* switch
* uart - ns16550a
* spi-flash interface
* gpio
* wdt
* led

The code was derived from various vendor SDKs based on Linux v2.6
kernels.

This patchset allows us to boot RTL838x/RTL839x units with basic support.
Most of the other drivers are already written and functional, and work to
get them upstream is already in progress.

Signed-off-by: Birger Koblitz <mail@birger-koblitz.de>
Signed-off-by: Bert Vermeulen <bert@biot.com>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Commit 2ee1503e546f ("MIPS: zboot: head.S clean up").

After .noreorder removed, clear BSS fall into endless loop. The bne
instruction will add nop to the delay slot at compile time. So a0
register will not increment by 4. Fix it and clear BSS from _edata
to (_end - 1).

Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

.cprestore is removed as we don't expect Position Independent
zboot ELF.

.noreorder is also removed and rest instructions are massaged
to improve readability.

t9 register is used for indirect jump as MIPS ABI requirement.

start label is removed as it already defined in LEAF.

Reported-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

The compressed payload is not necesarily 4-byte aligned, at least when
compiling with Clang. In that case, the 4-byte value appended to the
compressed payload that corresponds to the uncompressed kernel image
size must be read using get_unaligned_le32().

This fixes Clang-built kernels not booting on MIPS (tested on a Ingenic
JZ4770 board).

Fixes: b8f54f2cde78 ("MIPS: ZBOOT: copy appended dtb to the end of the kernel")
Cc: <stable@vger.kernel.org> # v4.7
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

The node names for devices using the pwm-leds driver follow a certain
naming scheme (now).  Parent node name is not enforced, but recommended
by DT project.

Signed-off-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Enable gcov profiling of the entire kernel on mips. Required changes
include disabling profiling for:

* arch/kernel/boot/compressed: not linked to main kernel.

Lightly tested on Loongson 3A3000 an 3A4000, seems to work as expected.

without "GCOV_PROFILE := n" in compressed Makefile,
build errors as follows:
...
ld: arch/mips/boot/compressed/string.o:(.data+0x88):
 undefined reference to `__gcov_merge_add'
ld: arch/mips/boot/compressed/string.o:
 in function `_GLOBAL__sub_I_00100_0_memcpy':
string.c:(.text.startup+0x4): undefined reference to `__gcov_init'
ld: arch/mips/boot/compressed/string.o:
 in function `_GLOBAL__sub_D_00100_1_memcpy':
string.c:(.text.exit+0x0): undefined reference to `__gcov_exit'
...

Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Xingxing Su <suxingxing@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>