DTC introduced an i2c_bus_reg check in v1.4.7, used since Linux v4.20,
which complains about upper case addresses used in the unit name.

nexys4ddr.dts names an I2C device node "ad7420@4B", leading to:

  arch/mips/boot/dts/xilfpga/nexys4ddr.dts:109.16-112.8: Warning
    (i2c_bus_reg): /i2c@10A00000/ad7420@4B: I2C bus unit address format
    error, expected "4b"

Fix this by switching to lower case addresses throughout the file, as is
*mostly* the case in the file already & fairly standard throughout the
tree.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: stable@vger.kernel.org # v4.20+
Cc: linux-mips@vger.kernel.org

According to the Schematic, the hardware of ci20 leads to uart3,
but not to uart2. Uart2 is miswritten in the original code.

Signed-off-by: Zhou Yanjie <zhouyanjie@cduestc.edu.cn>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips <linux-mips@vger.kernel.org>
Cc: linux-kernel <linux-kernel@vger.kernel.org>
Cc: devicetree@vger.kernel.org
Cc: robh+dt@kernel.org
Cc: ralf@linux-mips.org
Cc: jhogan@kernel.org
Cc: mark.rutland@arm.com
Cc: malat@debian.org
Cc: ezequiel@collabora.co.uk
Cc: ulf.hansson@linaro.org
Cc: syq <syq@debian.org>
Cc: jiaxun.yang <jiaxun.yang@flygoat.com>

The interrupt number set in the devicetree node of the DMA driver was
wrong.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

Remove the Malta display platform code in favour of probing the
img-ascii-lcd driver via device tree. This reduces the amount of
platform code & the img-ascii-lcd driver offers us advantages in terms
of code sharing with other boards & functionality such as changing the
displayed message via sysfs. Defconfigs are untouched because the driver
already defaults y on when CONFIG_MIPS_MALTA=y.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21182/
Cc: linux-mips@linux-mips.org

KEXEC needs the new kernel's load address to be aligned on a page
boundary (see sanity_check_segment_list()), but on MIPS the default
vmlinuz load address is only explicitly aligned to 16 bytes.

Since the largest PAGE_SIZE supported by MIPS kernels is 64KB, increase
the alignment calculated by calc_vmlinuz_load_addr to 64KB.

Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21131/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <james.hogan@mips.com>
Cc: Steven J . Hill <Steven.Hill@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: <stable@vger.kernel.org> # 2.6.36+

The Intel EG20T Platform Controller Hub used on the MIPS Boston
development board supports prefetching memory to optimize DMA transfers.
Unfortunately for unknown reasons this doesn't work well with some MIPS
CPUs such as the P6600, particularly when using an I/O Coherence Unit
(IOCU) to provide cache-coherent DMA. In these systems it is common for
DMA data to be lost, resulting in broken access to EG20T devices such as
the MMC or SATA controllers.

Support for a DT property to configure the prefetching was added a while
back by commit 549ce8f134bd ("misc: pch_phub: Read prefetch value from
device tree if passed") but we never added the DT snippet to make use of
it. Add that now in order to disable the prefetching & fix DMA on the
affected systems.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21068/
Cc: linux-mips@linux-mips.org

Pull MIPS updates from Paul Burton:

 - kexec support for the generic MIPS platform when running on a CPU
   including the MIPS Coherence Manager & related hardware.

 - Improvements to the definition of memory barriers used around MMIO
   accesses, and fixes in their use.

 - Switch to CONFIG_NO_BOOTMEM from Mike Rapoport, finally dropping
   reliance on the old bootmem code.

 - A number of fixes & improvements for Loongson 3 systems.

 - DT & config updates for the Microsemi Ocelot platform.

 - Workaround to enable USB power on the Netgear WNDR3400v3.

 - Various cleanups & fixes.

* tag 'mips_4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (51 commits)
  MIPS: Cleanup DSP ASE detection
  MIPS: dts: Change upper case to lower case
  MIPS: generic: Add Network, SPI and I2C to ocelot_defconfig
  MIPS: Loongson-3: Fix BRIDGE irq delivery problem
  MIPS: Loongson-3: Fix CPU UART irq delivery problem
  MIPS: Remove unused PREF, PREFE & PREFX macros
  MIPS: lib: Use kernel_pref & user_pref in memcpy()
  MIPS: Remove unused CAT macro
  MIPS: Add kernel_pref & user_pref helpers
  MIPS: Remove unused TTABLE macro
  MIPS: Remove unused PIC macros
  MIPS: Remove unused MOVN & MOVZ macros
  MIPS: Provide actually relaxed MMIO accessors
  MIPS: Enforce strong ordering for MMIO accessors
  MIPS: Correct `mmiowb' barrier for `wbflush' platforms
  MIPS: Define MMIO ordering barriers
  MIPS: mscc: add PCB120 to the ocelot fitImage
  MIPS: mscc: add DT for Ocelot PCB120
  MIPS: memset: Limit excessive `noreorder' assembly mode use
  MIPS: memset: Fix CPU_DADDI_WORKAROUNDS `small_fixup' regression
  ...

Pull dmaengine updates from Vinod Koul:

 - Support for ColdFire mcf5441x edma controller

 - Support for link list mode in sprd dma

 - More users of managed dmaenginem_async_device_register API

 - Cyclic mode support in owl dma driver

 - DT updates for renesas drivers, dma-jz4780 updates and support for
   JZ4770, JZ4740 and JZ4725B controllers

 - Removal of deprecated dma_slave_config direction in dmaengine
   drivers, few more users will be removed in next cycle and eventually
   removed.

 - Minor updates to idma64, ioat, pxa, ppc drivers

* tag 'dmaengine-4.20-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (66 commits)
  dmaengine: ppc4xx: fix off-by-one build failure
  dmaengine: owl: Fix warnings generated during build
  dmaengine: fsl-edma: remove dma_slave_config direction usage
  dmaengine: rcar-dmac: set scatter/gather max segment size
  dmaengine: mmp_tdma: remove dma_slave_config direction usage
  dmaengine: ep93xx_dma: remove dma_slave_config direction usage
  dmaengine: k3dma: remove dma_slave_config direction usage
  dmaengine: k3dma: dont use direction for memcpy
  dmaengine: imx-dma: remove dma_slave_config direction usage
  dmaengine: idma: remove dma_slave_config direction usage
  dmaengine: hsu: remove dma_slave_config direction usage
  dmaengine: dw: remove dma_slave_config direction usage
  dmaengine: jz4740: remove dma_slave_config direction usage
  dmaengine: coh901318: remove dma_slave_config direction usage
  dmaengine: bcm2835: remove dma_slave_config direction usage
  dmaengine: at_hdmac: remove dma_slave_config direction usage
  dmaengine: owl: Add Slave and Cyclic mode support for Actions Semi Owl S900 SoC
  dmaengine: ioat: fix prototype of ioat_enumerate_channels
  dmaengine: stm32-dma: check whether length is aligned on FIFO threshold
  dt-bindings: dmaengine: usb-dmac: Add binding for r8a7744
  ...

All the upper case in unit-address and hex constants are
changed to lower case according to the DT conventions.

Signed-off-by: Songjun Wu <songjun.wu@linux.intel.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Patchwork: https://patchwork.linux-mips.org/patch/20768/
Cc: yixin.zhu@linux.intel.com
Cc: chuanhua.lei@linux.intel.com
Cc: hauke.mehrtens@intel.com
Cc: devicetree@vger.kernel.org
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ralf Baechle <ralf@linux-mips.org>

The Ocelot PCB120 evaluation board is different from the PCB123 in that
it has 4 external VSC8584 (or VSC8574) PHYs.

It uses the SoC's second MDIO bus for external PHYs which have a
reversed address on the bus (i.e. PHY4 is on address 3, PHY5 is on
address 2, PHY6 on 1 and PHY7 on 0).

Here is how the PHYs are connected to the switch ports:
port 0: phy0 (internal)
port 1: phy1 (internal)
port 2: phy2 (internal)
port 3: phy3 (internal)
port 4: phy7
port 5: phy4
port 6: phy6
port 9: phy5

Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20869/
Cc: ralf@linux-mips.org
Cc: jhogan@kernel.org
Cc: robh+dt@kernel.org
Cc: mark.rutland@arm.com
Cc: davem@davemloft.net
Cc: andrew@lunn.ch
Cc: f.fainelli@gmail.com
Cc: allan.nielsen@microchip.com
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: thomas.petazzoni@bootlin.com
Cc: antoine.tenart@bootlin.com