[ Upstream commit 09782e72eec451fa14d327595f86cdc338ebe53c ]
In fact, it is a multi-threaded MIPS34Kc, not a single-threaded MIPS24Kc.
Fixes: 0ec488700972 ("mips: dts: Add EcoNet DTS with EN751221 and SmartFiber XP8421-B board")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b9706ce84be9cb26be03e1ad2e43ec8bc3986be ] This fixes the following warning: arch/mips/boot/dts/lantiq/danube_easy50712.dtb: stp@e100bb0 (lantiq,gpio-stp-xway): $nodename:0: 'stp@e100bb0' does not match '^gpio@[0-9a-f]+$' from schema $id: http://devicetree.org/schemas/gpio/gpio-stp-xway.yaml# Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d66949a1875352d2ddd52b144333288952a9e36f ] This fixes the following warning: arch/mips/boot/dts/lantiq/danube_easy50712.dtb: pci@e105400 (lantiq,pci-xway): 'device_type' is a required property from schema $id: http://devicetree.org/schemas/pci/pci-bus-common.yaml# Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cb96fd880ef78500b34d10fa76ddd3fa070287d6 ] This fixes the following warning: arch/mips/boot/dts/lantiq/danube_easy50712.dtb: / (lantiq,xway): 'model' is a required property from schema $id: http://devicetree.org/schemas/root-node.yaml# Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8dee66c37085dc9858eb8608bc783c2900e50e7 ] This fixes the following warnings: arch/mips/boot/dts/lantiq/danube_easy50712.dtb: cpus: '#address-cells' is a required property from schema $id: http://devicetree.org/schemas/cpus.yaml# arch/mips/boot/dts/lantiq/danube_easy50712.dtb: cpus: '#size-cells' is a required property from schema $id: http://devicetree.org/schemas/cpus.yaml# arch/mips/boot/dts/lantiq/danube_easy50712.dtb: cpu@0 (mips,mips24Kc): 'reg' is a required property from schema $id: http://devicetree.org/schemas/mips/cpus.yaml# Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Bindig requires a node name matching ‘^ethernet@[0-9a-f]+$’. This patch
changes the clock name from “etop” to “ethernet”.
This fixes the following warning:
arch/mips/boot/dts/lantiq/danube_easy50712.dtb: etop@e180000 (lantiq,etop-xway): $nodename:0: 'etop@e180000' does not match '^ethernet@[0-9a-f]+$'
from schema $id: http://devicetree.org/schemas/net/lantiq,etop-xway.yaml#
Fixes: dac0bad93741 ("dt-bindings: net: lantiq,etop-xway: Document Lantiq Xway ETOP bindings")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Acked-by: Jakub Kicinski <kuba@kernel.org>
The upstream dts lacks the lantiq,{rx/tx}-burst-length property. Other
issues were also fixed:
arch/mips/boot/dts/lantiq/danube_easy50712.dtb: etop@e180000 (lantiq,etop-xway): 'interrupt-names' is a required property
from schema $id: http://devicetree.org/schemas/net/lantiq,etop-xway.yaml#
arch/mips/boot/dts/lantiq/danube_easy50712.dtb: etop@e180000 (lantiq,etop-xway): 'lantiq,tx-burst-length' is a required property
from schema $id: http://devicetree.org/schemas/net/lantiq,etop-xway.yaml#
arch/mips/boot/dts/lantiq/danube_easy50712.dtb: etop@e180000 (lantiq,etop-xway): 'lantiq,rx-burst-length' is a required property
from schema $id: http://devicetree.org/schemas/net/lantiq,etop-xway.yaml#
Fixes: 14d4e308e0aa ("net: lantiq: configure the burst length in ethernet drivers")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Pull MIPS updates from Thomas Bogendoerfer:
- DT updates for ralink, mobileye and atheros/qualcomm
- Clean up of mc146818 usage
- Speed up delay calibration for CPS
- Other cleanups and fixes
* tag 'mips_6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (50 commits)
MIPS: Don't use %pK through printk
MIPS: Update Joshua Kinard's e-mail address
MIPS: mobileye: dts: eyeq5,eyeq6h: rename the emmc controller
MIPS: mm: tlb-r4k: Uniquify TLB entries on init
MIPS: SGI-IP27: Delete an unnecessary check before kfree() in hub_domain_free()
mips/malta,loongson2ef: use generic mc146818_get_time function
mips: remove redundant macro mc146818_decode_year
mips/mach-rm: remove custom mc146818rtc.h file
mips: remove unused function mc146818_set_rtc_mmss
MIPS: CPS: Optimise delay CPU calibration for SMP
MIPS: CPS: Improve mips_cps_first_online_in_cluster()
MIPS: disable MMID when not supported by the hardware
MIPS: eyeq5_defconfig: add I2C subsystem, driver and temp sensor driver
MIPS: eyeq5_defconfig: add GPIO subsystem & driver
MIPS: mobileye: eyeq5: add two GPIO bank nodes
MIPS: mobileye: eyeq5: add evaluation board I2C temp sensor
MIPS: mobileye: eyeq5: add 5 I2C controller nodes
MIPS: eyeq5_defconfig: Update for v6.16-rc1
MIPS: vpe-mt: add missing prototypes for vpe_{alloc,start,stop,free}
mips: boot: use 'targets' instead of extra-y in Makefile
...
The name should match the pattern defined in the mmc-controller binding. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202507220336.JhvVLL7k-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202507220215.wVoUMK5B-lkp@intel.com/ Signed-off-by: Benoît Monin <benoit.monin@bootlin.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
MT7620A devices all contain a wifi device as part of the SOC. Add it here to get it working. Signed-off-by: Rosen Penev <rosenp@gmail.com> Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://patch.msgid.link/20250722212856.11343-7-rosenp@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>