linux-stable.git/arch/mips/boot/compressed, branch linux-4.9.y

mips: disable branch profiling in boot/decompress.o

2021-07-20T14:21:16+00:00

[ Upstream commit 97e488073cfca0eea84450169ca4cbfcc64e33e3 ]

Use DISABLE_BRANCH_PROFILING for arch/mips/boot/compressed/decompress.o
to prevent linkage errors.

mips64-linux-ld: arch/mips/boot/compressed/decompress.o: in function `LZ4_decompress_fast_extDict':
decompress.c:(.text+0x8c): undefined reference to `ftrace_likely_update'
mips64-linux-ld: decompress.c:(.text+0xf4): undefined reference to `ftrace_likely_update'
mips64-linux-ld: decompress.c:(.text+0x200): undefined reference to `ftrace_likely_update'
mips64-linux-ld: decompress.c:(.text+0x230): undefined reference to `ftrace_likely_update'
mips64-linux-ld: decompress.c:(.text+0x320): undefined reference to `ftrace_likely_update'
mips64-linux-ld: arch/mips/boot/compressed/decompress.o:decompress.c:(.text+0x3f4): more undefined references to `ftrace_likely_update' follow

Fixes: e76e1fdfa8f8 ("lib: add support for LZ4-compressed kernel")
Reported-by: kernel test robot 
Signed-off-by: Randy Dunlap 
Cc: Thomas Bogendoerfer 
Cc: linux-mips@vger.kernel.org
Cc: Kyungsik Lee 
Signed-off-by: Thomas Bogendoerfer 
Signed-off-by: Sasha Levin

mips: always link byteswap helpers into decompressor

2021-07-20T14:21:15+00:00

[ Upstream commit cddc40f5617e53f97ef019d5b29c1bd6cbb031ec ]

My series to clean up the unaligned access implementation
across architectures caused some mips randconfig builds to
fail with:

   mips64-linux-ld: arch/mips/boot/compressed/decompress.o: in function `decompress_kernel':
   decompress.c:(.text.decompress_kernel+0x54): undefined reference to `__bswapsi2'

It turns out that this problem has already been fixed for the XZ
decompressor but now it also shows up in (at least) LZO and LZ4.  From my
analysis I concluded that the compiler could always have emitted those
calls, but the different implementation allowed it to make otherwise
better decisions about not inlining the byteswap, which results in the
link error when the out-of-line code is missing.

While it could be addressed by adding it to the two decompressor
implementations that are known to be affected, but as this only adds
112 bytes to the kernel, the safer choice is to always add them.

Fixes: c50ec6787536 ("MIPS: zboot: Fix the build with XZ compression on older GCC versions")
Fixes: 0652035a5794 ("asm-generic: unaligned: remove byteshift helpers")
Link: https://lore.kernel.org/linux-mm/202106301304.gz2wVY9w-lkp@intel.com/
Link: https://lore.kernel.org/linux-mm/202106260659.TyMe8mjr-lkp@intel.com/
Link: https://lore.kernel.org/linux-mm/202106172016.onWT6Tza-lkp@intel.com/
Link: https://lore.kernel.org/linux-mm/202105231743.JJcALnhS-lkp@intel.com/
Signed-off-by: Arnd Bergmann 
Signed-off-by: Thomas Bogendoerfer 
Signed-off-by: Sasha Levin

MIPS: boot: Fix unaligned access with CONFIG_MIPS_RAW_APPENDED_DTB

2021-01-23T14:38:16+00:00

commit 4d4f9c1a17a3480f8fe523673f7232b254d724b7 upstream.

The compressed payload is not necesarily 4-byte aligned, at least when
compiling with Clang. In that case, the 4-byte value appended to the
compressed payload that corresponds to the uncompressed kernel image
size must be read using get_unaligned_le32().

This fixes Clang-built kernels not booting on MIPS (tested on a Ingenic
JZ4770 board).

Fixes: b8f54f2cde78 ("MIPS: ZBOOT: copy appended dtb to the end of the kernel")
Cc:  # v4.7
Signed-off-by: Paul Cercueil 
Reviewed-by: Nick Desaulniers 
Reviewed-by: Philippe Mathieu-Daudé 
Signed-off-by: Thomas Bogendoerfer 
Signed-off-by: Greg Kroah-Hartman

MIPS: Truncate link address into 32bit for 32bit kernel

2020-06-20T08:24:16+00:00

[ Upstream commit ff487d41036035376e47972c7c522490b839ab37 ]

LLD failed to link vmlinux with 64bit load address for 32bit ELF
while bfd will strip 64bit address into 32bit silently.
To fix LLD build, we should truncate load address provided by platform
into 32bit for 32bit kernel.

Signed-off-by: Jiaxun Yang 
Link: https://github.com/ClangBuiltLinux/linux/issues/786
Link: https://sourceware.org/bugzilla/show_bug.cgi?id=25784
Reviewed-by: Fangrui Song 
Reviewed-by: Kees Cook 
Tested-by: Nathan Chancellor 
Cc: Maciej W. Rozycki 
Tested-by: Nick Desaulniers 
Signed-off-by: Thomas Bogendoerfer 
Signed-off-by: Sasha Levin

MIPS: Prevent link failure with kcov instrumentation

2020-01-23T07:19:37+00:00

[ Upstream commit a4a3893114a41e365274d5fab5d9ff5acc235ff0 ]

__sanitizer_cov_trace_pc() is not linked in and causing link
failure if KCOV_INSTRUMENT is enabled. Fix this by disabling
instrumentation for compressed image.

Signed-off-by: Jouni Hogander 
Signed-off-by: Paul Burton 
Cc: Lukas Bulwahn 
Cc: linux-mips@vger.kernel.org
Signed-off-by: Sasha Levin

MIPS: fix build on non-linux hosts

2019-08-04T07:33:14+00:00

[ Upstream commit 1196364f21ffe5d1e6d83cafd6a2edb89404a3ae ]

calc_vmlinuz_load_addr.c requires SZ_64K to be defined for alignment
purposes.  It included "../../../../include/linux/sizes.h" to define
that size, however "sizes.h" tries to include  which
assumes linux system headers.  These may not exist eg. the following
error was encountered when building Linux for OpenWrt under macOS:

In file included from arch/mips/boot/compressed/calc_vmlinuz_load_addr.c:16:
arch/mips/boot/compressed/../../../../include/linux/sizes.h:11:10: fatal error: 'linux/const.h' file not found
         ^~~~~~~~~~

Change makefile to force building on local linux headers instead of
system headers.  Also change eye-watering relative reference in include
file spec.

Thanks to Jo-Philip Wich & Petr Štetiar for assistance in tracking this
down & fixing.

Suggested-by: Jo-Philipp Wich 
Signed-off-by: Petr Štetiar 
Signed-off-by: Kevin Darbyshire-Bryant 
Signed-off-by: Paul Burton 
Cc: linux-mips@vger.kernel.org
Signed-off-by: Sasha Levin

MIPS: Align kernel load address to 64KB

2019-01-09T15:16:45+00:00

commit bec0de4cfad21bd284dbddee016ed1767a5d2823 upstream.

KEXEC needs the new kernel's load address to be aligned on a page
boundary (see sanity_check_segment_list()), but on MIPS the default
vmlinuz load address is only explicitly aligned to 16 bytes.

Since the largest PAGE_SIZE supported by MIPS kernels is 64KB, increase
the alignment calculated by calc_vmlinuz_load_addr to 64KB.

Signed-off-by: Huacai Chen 
Signed-off-by: Paul Burton 
Patchwork: https://patchwork.linux-mips.org/patch/21131/
Cc: Ralf Baechle 
Cc: James Hogan 
Cc: Steven J . Hill 
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang 
Cc: Zhangjin Wu 
Cc:  # 2.6.36+
Signed-off-by: Greg Kroah-Hartman

MIPS: ZBOOT: copy appended dtb to the end of the kernel

2016-08-02T12:00:16+00:00

Instead of rewriting the arguments, just move the appended dtb to where
the decompressed kernel expects it. This eliminates the need for special
casing vmlinuz.bin appended dtb files.

Signed-off-by: Jonas Gorski 
Cc: Kevin Cernekee 
Cc: Florian Fainelli 
Cc: John Crispin 
Cc: Paul Burton 
Cc: James Hogan 
Cc: Alban Bedel 
Cc: Daniel Gimpelevich 
Cc: Antony Pavlov 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13698/
Signed-off-by: Ralf Baechle

MIPS: ath79: Add zboot debug serial support

2016-05-13T12:01:37+00:00

Reuse the early printk code to support the serial in zboot. We copy
early_printk.c instead of referencing it because we need to build a
different object file for the normal kernel and zboot.

Signed-off-by: Alban Bedel 
Cc: Andrew Bresticker 
Cc: Alex Smith 
Cc: Wu Zhangjin 
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12234/
Signed-off-by: Ralf Baechle

MIPS: zboot: Remove copied source files on clean

2016-04-03T08:37:21+00:00

The copied source files must be added to the extra-y list to have them
removed on clean.

Signed-off-by: Alban Bedel 
Cc: Andrew Bresticker 
Cc: Alex Smith 
Cc: Wu Zhangjin 
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12233/
Signed-off-by: Ralf Baechle