<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-stable.git/arch/mips/bmips/setup.c, branch linux-4.9.y</title>
<subtitle>Linux kernel stable tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/'/>
<entry>
<title>MIPS: Use address-of operator on section symbols</title>
<updated>2022-05-15T17:39:17+00:00</updated>
<author>
<name>Nathan Chancellor</name>
<email>natechancellor@gmail.com</email>
</author>
<published>2021-01-05T20:18:27+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=40992017f28a85b9a91adf5160de6fb9323cfa0d'/>
<id>40992017f28a85b9a91adf5160de6fb9323cfa0d</id>
<content type='text'>
commit d422c6c0644bccbb1ebeefffa51f35cec3019517 upstream.

When building xway_defconfig with clang:

arch/mips/lantiq/prom.c:82:23: error: array comparison always evaluates
to true [-Werror,-Wtautological-compare]
        else if (__dtb_start != __dtb_end)
                             ^
1 error generated.

These are not true arrays, they are linker defined symbols, which are
just addresses. Using the address of operator silences the warning
and does not change the resulting assembly with either clang/ld.lld
or gcc/ld (tested with diff + objdump -Dr). Do the same thing across
the entire MIPS subsystem to ensure there are no more warnings around
this type of comparison.

Link: https://github.com/ClangBuiltLinux/linux/issues/1232
Signed-off-by: Nathan Chancellor &lt;natechancellor@gmail.com&gt;
Acked-by: Florian Fainelli &lt;f.fainelli@gmail.com&gt;
Signed-off-by: Thomas Bogendoerfer &lt;tsbogend@alpha.franken.de&gt;
Cc: Sudip Mukherjee &lt;sudipm.mukherjee@gmail.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit d422c6c0644bccbb1ebeefffa51f35cec3019517 upstream.

When building xway_defconfig with clang:

arch/mips/lantiq/prom.c:82:23: error: array comparison always evaluates
to true [-Werror,-Wtautological-compare]
        else if (__dtb_start != __dtb_end)
                             ^
1 error generated.

These are not true arrays, they are linker defined symbols, which are
just addresses. Using the address of operator silences the warning
and does not change the resulting assembly with either clang/ld.lld
or gcc/ld (tested with diff + objdump -Dr). Do the same thing across
the entire MIPS subsystem to ensure there are no more warnings around
this type of comparison.

Link: https://github.com/ClangBuiltLinux/linux/issues/1232
Signed-off-by: Nathan Chancellor &lt;natechancellor@gmail.com&gt;
Acked-by: Florian Fainelli &lt;f.fainelli@gmail.com&gt;
Signed-off-by: Thomas Bogendoerfer &lt;tsbogend@alpha.franken.de&gt;
Cc: Sudip Mukherjee &lt;sudipm.mukherjee@gmail.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>MIPS: BMIPS: Support APPENDED_DTB</title>
<updated>2016-10-06T15:31:02+00:00</updated>
<author>
<name>Jaedon Shin</name>
<email>jaedon.shin@gmail.com</email>
</author>
<published>2016-09-30T14:17:34+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=d66698e0834657161314050b6c99c3eba36b180a'/>
<id>d66698e0834657161314050b6c99c3eba36b180a</id>
<content type='text'>
Use appended DTB when available.

Signed-off-by: Jaedon Shin &lt;jaedon.shin@gmail.com&gt;
Cc: Kevin Cernekee &lt;cernekee@gmail.com&gt;
Cc: Florian Fainelli &lt;f.fainelli@gmail.com&gt;
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14337/
Signed-off-by: Ralf Baechle &lt;ralf@linux-mips.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Use appended DTB when available.

Signed-off-by: Jaedon Shin &lt;jaedon.shin@gmail.com&gt;
Cc: Kevin Cernekee &lt;cernekee@gmail.com&gt;
Cc: Florian Fainelli &lt;f.fainelli@gmail.com&gt;
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14337/
Signed-off-by: Ralf Baechle &lt;ralf@linux-mips.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>MIPS: BMIPS: Add BCM6362 support</title>
<updated>2016-10-04T14:13:57+00:00</updated>
<author>
<name>Álvaro Fernández Rojas</name>
<email>noltari@gmail.com</email>
</author>
<published>2016-08-03T09:58:29+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=8e385a66d7db14599457fdc7898403c1fa24acb4'/>
<id>8e385a66d7db14599457fdc7898403c1fa24acb4</id>
<content type='text'>
BCM6362 is a BMIPS4350 SoC which needs the same fixup as BCM6368 in order to
enable SMP support.

Signed-off-by: Álvaro Fernández Rojas &lt;noltari@gmail.com&gt;
Cc: f.fainelli@gmail.com
Cc: jogo@openwrt.org
Cc: cernekee@gmail.com
Cc: robh@kernel.org
Cc: simon@fire.lp0.eu
Cc: john@phrozen.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13845/
Signed-off-by: Ralf Baechle &lt;ralf@linux-mips.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
BCM6362 is a BMIPS4350 SoC which needs the same fixup as BCM6368 in order to
enable SMP support.

Signed-off-by: Álvaro Fernández Rojas &lt;noltari@gmail.com&gt;
Cc: f.fainelli@gmail.com
Cc: jogo@openwrt.org
Cc: cernekee@gmail.com
Cc: robh@kernel.org
Cc: simon@fire.lp0.eu
Cc: john@phrozen.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13845/
Signed-off-by: Ralf Baechle &lt;ralf@linux-mips.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>MIPS: BMIPS: Add BCM3368 support</title>
<updated>2016-10-04T14:13:57+00:00</updated>
<author>
<name>Álvaro Fernández Rojas</name>
<email>noltari@gmail.com</email>
</author>
<published>2016-08-03T09:58:27+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=4bac0e2afc7b7603c1781733629254d7a6b9a83c'/>
<id>4bac0e2afc7b7603c1781733629254d7a6b9a83c</id>
<content type='text'>
BCM3368 has a shared TLB which conflicts with current SMP support, so it must
be disabled for now.

Signed-off-by: Álvaro Fernández Rojas &lt;noltari@gmail.com&gt;
Cc: f.fainelli@gmail.com
Cc: jogo@openwrt.org
Cc: cernekee@gmail.com
Cc: robh@kernel.org
Cc: simon@fire.lp0.eu
Cc: john@phrozen.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13840/
Signed-off-by: Ralf Baechle &lt;ralf@linux-mips.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
BCM3368 has a shared TLB which conflicts with current SMP support, so it must
be disabled for now.

Signed-off-by: Álvaro Fernández Rojas &lt;noltari@gmail.com&gt;
Cc: f.fainelli@gmail.com
Cc: jogo@openwrt.org
Cc: cernekee@gmail.com
Cc: robh@kernel.org
Cc: simon@fire.lp0.eu
Cc: john@phrozen.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13840/
Signed-off-by: Ralf Baechle &lt;ralf@linux-mips.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>MIPS: store the appended dtb address in a variable</title>
<updated>2016-08-02T12:00:16+00:00</updated>
<author>
<name>Jonas Gorski</name>
<email>jogo@openwrt.org</email>
</author>
<published>2016-06-20T09:27:37+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=15f37e1588920e010f20b53f04af94e91b8ee714'/>
<id>15f37e1588920e010f20b53f04af94e91b8ee714</id>
<content type='text'>
Instead of rewriting the arguments to match the UHI spec, store the
address of a appended or UHI supplied dtb in fw_supplied_dtb.

That way the original bootloader arugments are kept intact while still
making the use of an appended dtb invisible for mach code.

Mach code can still find out if it is an appended dtb by comparing
fw_arg1 with fw_supplied_dtb.

Signed-off-by: Jonas Gorski &lt;jogo@openwrt.org&gt;
Cc: Kevin Cernekee &lt;cernekee@gmail.com&gt;
Cc: Florian Fainelli &lt;f.fainelli@gmail.com&gt;
Cc: John Crispin &lt;john@phrozen.org&gt;
Cc: Paul Burton &lt;paul.burton@imgtec.com&gt;
Cc: James Hogan &lt;james.hogan@imgtec.com&gt;
Cc: Alban Bedel &lt;albeu@free.fr&gt;
Cc: Daniel Gimpelevich &lt;daniel@gimpelevich.san-francisco.ca.us&gt;
Cc: Antony Pavlov &lt;antonynpavlov@gmail.com&gt;
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13699/
Signed-off-by: Ralf Baechle &lt;ralf@linux-mips.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Instead of rewriting the arguments to match the UHI spec, store the
address of a appended or UHI supplied dtb in fw_supplied_dtb.

That way the original bootloader arugments are kept intact while still
making the use of an appended dtb invisible for mach code.

Mach code can still find out if it is an appended dtb by comparing
fw_arg1 with fw_supplied_dtb.

Signed-off-by: Jonas Gorski &lt;jogo@openwrt.org&gt;
Cc: Kevin Cernekee &lt;cernekee@gmail.com&gt;
Cc: Florian Fainelli &lt;f.fainelli@gmail.com&gt;
Cc: John Crispin &lt;john@phrozen.org&gt;
Cc: Paul Burton &lt;paul.burton@imgtec.com&gt;
Cc: James Hogan &lt;james.hogan@imgtec.com&gt;
Cc: Alban Bedel &lt;albeu@free.fr&gt;
Cc: Daniel Gimpelevich &lt;daniel@gimpelevich.san-francisco.ca.us&gt;
Cc: Antony Pavlov &lt;antonynpavlov@gmail.com&gt;
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13699/
Signed-off-by: Ralf Baechle &lt;ralf@linux-mips.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>MIPS: BMIPS: Add support for BCM63268</title>
<updated>2016-05-13T12:02:09+00:00</updated>
<author>
<name>Álvaro Fernández Rojas</name>
<email>noltari@gmail.com</email>
</author>
<published>2016-04-09T10:57:19+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=3652acd2315562614826eba7d38fae51389636f9'/>
<id>3652acd2315562614826eba7d38fae51389636f9</id>
<content type='text'>
This SoC is very similar to BCM63168 and Broadcom usually refers to them as
BCM63268.
Add BCM63268 and missing BCM63168 to device tree documentation.

Signed-off-by: Álvaro Fernández Rojas &lt;noltari@gmail.com&gt;
Acked-by: Rob Herring &lt;robh@kernel.org&gt;
Cc: f.fainelli@gmail.com
Cc: jogo@openwrt.org
Cc: cernekee@gmail.com
Cc: robh@kernel.org
Cc: simon@fire.lp0.eu
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13042/
Signed-off-by: Ralf Baechle &lt;ralf@linux-mips.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
This SoC is very similar to BCM63168 and Broadcom usually refers to them as
BCM63268.
Add BCM63268 and missing BCM63168 to device tree documentation.

Signed-off-by: Álvaro Fernández Rojas &lt;noltari@gmail.com&gt;
Acked-by: Rob Herring &lt;robh@kernel.org&gt;
Cc: f.fainelli@gmail.com
Cc: jogo@openwrt.org
Cc: cernekee@gmail.com
Cc: robh@kernel.org
Cc: simon@fire.lp0.eu
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13042/
Signed-off-by: Ralf Baechle &lt;ralf@linux-mips.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>MIPS: BMIPS: Add BCM6358 support</title>
<updated>2016-05-13T12:02:09+00:00</updated>
<author>
<name>Álvaro Fernández Rojas</name>
<email>noltari@gmail.com</email>
</author>
<published>2016-04-09T10:56:47+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=3604b4510c17c16271b3446528807227dfb02b04'/>
<id>3604b4510c17c16271b3446528807227dfb02b04</id>
<content type='text'>
BCM6358 has a shared TLB which conflicts with current SMP support, so it must
be disabled for now.
BCM6358 uses &gt;= 0xfffe0000 addresses for internal registers, which need to be
remapped (by using a simplified version of BRCM63xx ioremap.h).
However, 0xfff80000 is a better address, since it also covers BCM3368, leaving
the possibility to add it in the future.

Signed-off-by: Álvaro Fernández Rojas &lt;noltari@gmail.com&gt;
Cc: f.fainelli@gmail.com
Cc: jogo@openwrt.org
Cc: cernekee@gmail.com
Cc: robh@kernel.org
Cc: simon@fire.lp0.eu
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13040/
Signed-off-by: Ralf Baechle &lt;ralf@linux-mips.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
BCM6358 has a shared TLB which conflicts with current SMP support, so it must
be disabled for now.
BCM6358 uses &gt;= 0xfffe0000 addresses for internal registers, which need to be
remapped (by using a simplified version of BRCM63xx ioremap.h).
However, 0xfff80000 is a better address, since it also covers BCM3368, leaving
the possibility to add it in the future.

Signed-off-by: Álvaro Fernández Rojas &lt;noltari@gmail.com&gt;
Cc: f.fainelli@gmail.com
Cc: jogo@openwrt.org
Cc: cernekee@gmail.com
Cc: robh@kernel.org
Cc: simon@fire.lp0.eu
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13040/
Signed-off-by: Ralf Baechle &lt;ralf@linux-mips.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>MIPS: BMIPS: Add early CPU initialization code</title>
<updated>2016-05-13T12:01:55+00:00</updated>
<author>
<name>Florian Fainelli</name>
<email>f.fainelli@gmail.com</email>
</author>
<published>2016-02-09T20:55:50+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=738a3f79027bef44b0bd3bfcc325f53b518749d4'/>
<id>738a3f79027bef44b0bd3bfcc325f53b518749d4</id>
<content type='text'>
Port the stblinux-3.3 code to perform a bunch of CPU-specific initialization,
make it compatible with run-time detection of the CPU, and unroll the
brcmstb-specific macros: BDEV_RB(), BDEV_UNSET.

The "pref 30" disabling is done as a quirk. This is a preliminary change to
allow the use of the "rotr" instruction gated by cpu_has_rixi.

Signed-off-by: Florian Fainelli &lt;f.fainelli@gmail.com&gt;
Cc: john@phrozen.org
Cc: cernekee@gmail.com
Cc: jon.fraser@broadcom.com
Cc: pgynther@google.com
Cc: paul.burton@imgtec.com
Cc: ddaney.cavm@gmail.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12504/
Signed-off-by: Ralf Baechle &lt;ralf@linux-mips.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Port the stblinux-3.3 code to perform a bunch of CPU-specific initialization,
make it compatible with run-time detection of the CPU, and unroll the
brcmstb-specific macros: BDEV_RB(), BDEV_UNSET.

The "pref 30" disabling is done as a quirk. This is a preliminary change to
allow the use of the "rotr" instruction gated by cpu_has_rixi.

Signed-off-by: Florian Fainelli &lt;f.fainelli@gmail.com&gt;
Cc: john@phrozen.org
Cc: cernekee@gmail.com
Cc: jon.fraser@broadcom.com
Cc: pgynther@google.com
Cc: paul.burton@imgtec.com
Cc: ddaney.cavm@gmail.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12504/
Signed-off-by: Ralf Baechle &lt;ralf@linux-mips.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>MIPS: bmips: Support SMP on BCM63168</title>
<updated>2016-01-04T08:42:26+00:00</updated>
<author>
<name>Simon Arlott</name>
<email>simon@fire.lp0.eu</email>
</author>
<published>2015-11-15T16:37:23+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=16580796f90531119adbd0913f5126d6369ad17b'/>
<id>16580796f90531119adbd0913f5126d6369ad17b</id>
<content type='text'>
The BCM63168 requires the same CPU1 fix as BCM6368.

Signed-off-by: Simon Arlott &lt;simon@fire.lp0.eu&gt;
Cc: Kevin Cernekee &lt;cernekee@gmail.com&gt;
Cc: Florian Fainelli &lt;f.fainelli@gmail.com&gt;
Cc: linux-mips@linux-mips.org
Cc: Linux Kernel Mailing List &lt;linux-kernel@vger.kernel.org&gt;
Patchwork: https://patchwork.linux-mips.org/patch/11487/
Signed-off-by: Ralf Baechle &lt;ralf@linux-mips.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The BCM63168 requires the same CPU1 fix as BCM6368.

Signed-off-by: Simon Arlott &lt;simon@fire.lp0.eu&gt;
Cc: Kevin Cernekee &lt;cernekee@gmail.com&gt;
Cc: Florian Fainelli &lt;f.fainelli@gmail.com&gt;
Cc: linux-mips@linux-mips.org
Cc: Linux Kernel Mailing List &lt;linux-kernel@vger.kernel.org&gt;
Patchwork: https://patchwork.linux-mips.org/patch/11487/
Signed-off-by: Ralf Baechle &lt;ralf@linux-mips.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>MIPS: Make MIPS_CMDLINE_DTB default</title>
<updated>2015-11-11T07:38:37+00:00</updated>
<author>
<name>Jonas Gorski</name>
<email>jogo@openwrt.org</email>
</author>
<published>2015-10-12T11:13:03+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=2bcef9b457bbe159a5e3843e2578d8195e0b1c56'/>
<id>2bcef9b457bbe159a5e3843e2578d8195e0b1c56</id>
<content type='text'>
Seval of-enabled machines (bmips, lantiq, xlp, pistachio, ralink) copied
the arguments from dtb to arcs_command_line to prevent the kernel from
overwriting them.

Since there is now an option to keep the dtb arguments, default to the
new option remove the "backup" to arcs_command_line in case of USE_OF is
enabled, except for those platforms that still take the bootloader
arguments or do not use any at all.

Signed-off-by: Jonas Gorski &lt;jogo@openwrt.org&gt;
Cc: linux-mips@linux-mips.org
Cc: Kevin Cernekee &lt;cernekee@gmail.com&gt;
Cc: Florian Fainelli &lt;f.fainelli@gmail.com&gt;
Cc: Zubair Lutfullah Kakakhel &lt;Zubair.Kakakhel@imgtec.com&gt;
Cc: James Hogan &lt;james.hogan@imgtec.com&gt;
Cc: John Crispin &lt;blogic@openwrt.org&gt;
Cc: Ganesan Ramalingam &lt;ganesanr@broadcom.com&gt;
Cc: Jayachandran C &lt;jchandra@broadcom.com&gt;
Cc: Andrew Bresticker &lt;abrestic@chromium.org&gt;
Cc: James Hartley &lt;james.hartley@imgtec.com&gt;
Patchwork: https://patchwork.linux-mips.org/patch/11285/
Signed-off-by: Ralf Baechle &lt;ralf@linux-mips.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Seval of-enabled machines (bmips, lantiq, xlp, pistachio, ralink) copied
the arguments from dtb to arcs_command_line to prevent the kernel from
overwriting them.

Since there is now an option to keep the dtb arguments, default to the
new option remove the "backup" to arcs_command_line in case of USE_OF is
enabled, except for those platforms that still take the bootloader
arguments or do not use any at all.

Signed-off-by: Jonas Gorski &lt;jogo@openwrt.org&gt;
Cc: linux-mips@linux-mips.org
Cc: Kevin Cernekee &lt;cernekee@gmail.com&gt;
Cc: Florian Fainelli &lt;f.fainelli@gmail.com&gt;
Cc: Zubair Lutfullah Kakakhel &lt;Zubair.Kakakhel@imgtec.com&gt;
Cc: James Hogan &lt;james.hogan@imgtec.com&gt;
Cc: John Crispin &lt;blogic@openwrt.org&gt;
Cc: Ganesan Ramalingam &lt;ganesanr@broadcom.com&gt;
Cc: Jayachandran C &lt;jchandra@broadcom.com&gt;
Cc: Andrew Bresticker &lt;abrestic@chromium.org&gt;
Cc: James Hartley &lt;james.hartley@imgtec.com&gt;
Patchwork: https://patchwork.linux-mips.org/patch/11285/
Signed-off-by: Ralf Baechle &lt;ralf@linux-mips.org&gt;
</pre>
</div>
</content>
</entry>
</feed>
