linux-stable.git/arch/mips/ar7/platform.c, branch master

MIPS: AR7: remove platform

2023-10-19T08:39:46+00:00

After a discussion about removing VLYNQ support from the Kernel, it was
concluded that its only user, the AR7 platform can go [1]. Even OpenWRT
has removed support because these devices are "stuck with 3.18" [2].

[1] https://lore.kernel.org/r/3395161f-2543-46f0-83d9-b918800305e1@gmail.com
[2] https://openwrt.org/docs/techref/targets/ar7

Suggested-by: Jonas Gorski 
Signed-off-by: Wolfram Sang 
Acked-by: Florian Fainelli 
Signed-off-by: Thomas Bogendoerfer

remove ioremap_nocache and devm_ioremap_nocache

2020-01-06T08:45:59+00:00

ioremap has provided non-cached semantics by default since the Linux 2.6
days, so remove the additional ioremap_nocache interface.

Signed-off-by: Christoph Hellwig 
Acked-by: Arnd Bergmann

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 102

2019-05-24T15:39:00+00:00

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details you
  should have received a copy of the gnu general public license along
  with this program if not write to the free software foundation inc
  51 franklin st fifth floor boston ma 02110 1301 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 50 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Kate Stewart 
Reviewed-by: Allison Randal 
Reviewed-by: Richard Fontana 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190523091649.499889647@linutronix.de
Signed-off-by: Greg Kroah-Hartman

net: phy: fixed-phy: Drop GPIO from fixed_phy_add()

2019-02-05T02:33:36+00:00

All users of the fixed_phy_add() pass -1 as GPIO number
to the fixed phy driver, and all users of fixed_phy_register()
pass -1 as GPIO number as well, except for the device
tree MDIO bus.

Any new users should create a proper device and pass the
GPIO as a descriptor associated with the device so delete
the GPIO argument from the calls and drop the code looking
requesting a GPIO in fixed_phy_add().

In fixed phy_register(), investigate the "fixed-link"
node and pick the GPIO descriptor from "link-gpios" if
this property exists. Move the corresponding code out
of of_mdio.c as the fixed phy code anyways requires
OF to be in use.

Tested-by: Andrew Lunn 
Signed-off-by: Linus Walleij 
Signed-off-by: David S. Miller

MIPS: AR7: Constify gpio_led

2018-02-19T10:55:36+00:00

gpio_leds are not supposed to change at runtime. struct
gpio_led_platform_data contains a const struct gpio_led pointer since
v2.6.39, so mark the gpio_led structures const too.

Signed-off-by: Arvind Yadav 
Cc: Ralf Baechle 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18007/
[jhogan@kernel.org: improve commit message]
Signed-off-by: James Hogan

MIPS: AR7: ensure the port type's FCR value is used

2018-01-10T10:34:56+00:00

Since commit aef9a7bd9b67 ("serial/uart/8250: Add tunable RX interrupt
trigger I/F of FIFO buffers"), the port's default FCR value isn't used
in serial8250_do_set_termios anymore, but copied over once in
serial8250_config_port and then modified as needed.

Unfortunately, serial8250_config_port will never be called if the port
is shared between kernel and userspace, and the port's flag doesn't have
UPF_BOOT_AUTOCONF, which would trigger a serial8250_config_port as well.

This causes garbled output from userspace:

[    5.220000] random: procd urandom read with 49 bits of entropy available
ers
   [kee

Fix this by forcing it to be configured on boot, resulting in the
expected output:

[    5.250000] random: procd urandom read with 50 bits of entropy available
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level

Fixes: aef9a7bd9b67 ("serial/uart/8250: Add tunable RX interrupt trigger I/F of FIFO buffers")
Signed-off-by: Jonas Gorski 
Cc: Greg Kroah-Hartman 
Cc: Yoshihiro YUNOMAE 
Cc: Florian Fainelli 
Cc: Nicolas Schichan 
Cc: linux-mips@linux-mips.org
Cc: linux-serial@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17544/
Signed-off-by: Ralf Baechle

MIPS: AR7: Ensure that serial ports are properly set up

2017-11-08T14:57:55+00:00

Without UPF_FIXED_TYPE, the data from the PORT_AR7 uart_config entry is
never copied, resulting in a dead port.

Fixes: 154615d55459 ("MIPS: AR7: Use correct UART port type")
Signed-off-by: Oswald Buddenhagen 
[jonas.gorski: add Fixes tag]
Signed-off-by: Jonas Gorski 
Reviewed-by: Florian Fainelli 
Cc: Ralf Baechle 
Cc: Greg Kroah-Hartman 
Cc: Yoshihiro YUNOMAE 
Cc: Nicolas Schichan 
Cc: Oswald Buddenhagen 
Cc: linux-mips@linux-mips.org
Cc: linux-serial@vger.kernel.org
Cc: 
Patchwork: https://patchwork.linux-mips.org/patch/17543/
Signed-off-by: James Hogan

MIPS: AR7: Defer registration of GPIO

2017-11-08T12:44:26+00:00

When called from prom init code, ar7_gpio_init() will fail as it will
call gpiochip_add() which relies on a working kmalloc() to alloc
the gpio_desc array and kmalloc is not useable yet at prom init time.

Move ar7_gpio_init() to ar7_register_devices() (a device_initcall)
where kmalloc works.

Fixes: 14e85c0e69d5 ("gpio: remove gpio_descs global array")
Signed-off-by: Jonas Gorski 
Reviewed-by: Florian Fainelli 
Cc: Ralf Baechle 
Cc: Greg Kroah-Hartman 
Cc: Yoshihiro YUNOMAE 
Cc: Nicolas Schichan 
Cc: linux-mips@linux-mips.org
Cc: linux-serial@vger.kernel.org
Cc:  # 3.19+
Patchwork: https://patchwork.linux-mips.org/patch/17542/
Signed-off-by: James Hogan

MIPS: Audit and remove any unnecessary uses of module.h

2017-02-14T09:00:25+00:00

Historically a lot of these existed because we did not have
a distinction between what was modular code and what was providing
support to modules via EXPORT_SYMBOL and friends.  That changed
when we forked out support for the latter into the export.h file.

This means we should be able to reduce the usage of module.h
in code that is obj-y Makefile or bool Kconfig.  In the case of
some code where it is modular, we can extend that to also include
files that are building basic support functionality but not related
to loading or registering the final module; such files also have
no need whatsoever for module.h

The advantage in removing such instances is that module.h itself
sources about 15 other headers; adding significantly to what we feed
cpp, and it can obscure what headers we are effectively using.

Since module.h might have been the implicit source for init.h
(for __init) and for export.h (for EXPORT_SYMBOL) we consider each
instance for the presence of either and replace/add as needed.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

Build coverage of all the mips defconfigs revealed the module.h
header was masking a couple of implicit include instances, so
we add the appropriate headers there.

Signed-off-by: Paul Gortmaker 
Cc: David Daney 
Cc: John Crispin 
Cc: Ralf Baechle 
Cc: "Steven J. Hill" 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15131/
[james.hogan@imgtec.com: Preserve sort order where it already exists]
Signed-off-by: James Hogan

Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

2015-09-03T23:55:55+00:00

Pull MIPS updates from Ralf Baechle:
 "This is the main pull request for 4.3 for MIPS.  Here's the summary:

  Three fixes that didn't make 4.2-stable:

   - a -Os build might compile the kernel using the MIPS16 instruction
     set but the R2 optimized inline functions in  are
     implemented using 32-bit wide instructions which is invalid.

   - a build error in pgtable-bits.h for a particular kernel
     configuration.

   - accessing registers of the CM GCR might have been compiled to use
     64 bit accesses but these registers are onl 32 bit wide.

  And also a few new bits:

   - move the ATH79 GPIO driver to drivers/gpio

   - the definition of IRQCHIP_DECLARE has moved to linux/irqchip.h,
     change ATH79 accordingly.

   - fix definition of pgprot_writecombine

   - add an implementation of dma_map_ops.mmap

   - fix alignment of quiet build output for vmlinuz link

   - BCM47xx: Use kmemdup rather than duplicating its implementation

   - Netlogic: Fix 0x0x prefixes of constants.

   - merge Bjorn Helgaas' series to remove most of the weak keywords
     from function declarations.

   - CP0 and CP1 registers are best considered treated as unsigned
     values to avoid large values from becoming negative values.

   - improve support for the MIPS GIC timer.

   - enable common clock framework for Malta and SEAD3.

   - a number of improvments and fixes to dump_tlb().

   - document the MIPS TLB dump functionality in Magic SysRq.

   - Cavium Octeon CN68XX improvments.

   - NetLogic improvments.

   - irq: Use access helper irq_data_get_affinity_mask.

   - handle MSA unaligned accesses.

   - a number of R6-related math-emu fixes.

   - support for I6400.

   - improvments to MSA support.

   - add uprobes support.

   - move from deprecated __initcall to arch_initcall.

   - remove finish_arch_switch().

   - IRQ cleanups by Thomas Gleixner.

   - migrate to new 'set-state' interface.

   - random small cleanups"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (148 commits)
  MIPS: UAPI: Fix unrecognized opcode WSBH/DSBH/DSHD when using MIPS16.
  MIPS: Fix alignment of quiet build output for vmlinuz link
  MIPS: math-emu: Remove unused handle_dsemul function declaration
  MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction
  MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction
  MIPS: math-emu: Add support for the MIPS R6 CLASS FPU instruction
  MIPS: math-emu: Add support for the MIPS R6 RINT FPU instruction
  MIPS: math-emu: Add support for the MIPS R6 MSUBF FPU instruction
  MIPS: math-emu: Add support for the MIPS R6 MADDF FPU instruction
  MIPS: math-emu: Add support for the MIPS R6 SELNEZ FPU instruction
  MIPS: math-emu: Add support for the MIPS R6 SELEQZ FPU instruction
  MIPS: math-emu: Add support for the CMP.condn.fmt R6 instruction
  MIPS: inst.h: Add new MIPS R6 FPU opcodes
  MIPS: Octeon: Fix management port MII address on Kontron S1901
  MIPS: BCM47xx: Use kmemdup rather than duplicating its implementation
  STAGING: Octeon: Use common helpers for determining interface and port
  MIPS: Octeon: Support interfaces 4 and 5
  MIPS: Octeon: Set up 1:1 mapping between CN68XX PKO queues and ports
  MIPS: Octeon: Initialize CN68XX PKO
  STAGING: Octeon: Support CN68XX style WQE
  ...