linux-stable.git/arch/microblaze, branch v4.0

microblaze: Fix syscall error recovery for invalid syscall IDs

2015-03-04T14:12:27+00:00

This patch fixes two bugs in the Microblaze syscall trap handler when an invalid
syscall ID is used.

First, the range check on line 351 only checks for syscall IDs greater than
__NR_syscalls. A negative syscall ID (either passed to `syscall()` or as returned
by `do_syscall_trace_enter()` on error) will still satisfy this test and cause
the Linux kernel to access an invalid memory location and cause a kernel oops.
This has been fixed by also checking for r12 < 0.

Secondly, the current error recovery at line 378 returns using the wrong register
(r15 instead of r14) and does not restore the previous stack state. This has been
fixed by invoking `ret_from_trap` on error, setting r3 to `-ENOSYS`, similar to
what would happen when calling a valid syscall.

Signed-off-by: Jamie Garside 
Signed-off-by: Michal Simek

microblaze: Coding style cleanup

2015-03-04T14:11:55+00:00

No function change.

Signed-off-by: Michal Simek

all arches, signal: move restart_block to struct task_struct

2015-02-13T02:54:12+00:00

If an attacker can cause a controlled kernel stack overflow, overwriting
the restart block is a very juicy exploit target.  This is because the
restart_block is held in the same memory allocation as the kernel stack.

Moving the restart block to struct task_struct prevents this exploit by
making the restart_block harder to locate.

Note that there are other fields in thread_info that are also easy
targets, at least on some architectures.

It's also a decent simplification, since the restart code is more or less
identical on all architectures.

[james.hogan@imgtec.com: metag: align thread_info::supervisor_stack]
Signed-off-by: Andy Lutomirski 
Cc: Thomas Gleixner 
Cc: Al Viro 
Cc: "H. Peter Anvin" 
Cc: Ingo Molnar 
Cc: Kees Cook 
Cc: David Miller 
Acked-by: Richard Weinberger 
Cc: Richard Henderson 
Cc: Ivan Kokshaysky 
Cc: Matt Turner 
Cc: Vineet Gupta 
Cc: Russell King 
Cc: Catalin Marinas 
Cc: Will Deacon 
Cc: Haavard Skinnemoen 
Cc: Hans-Christian Egtvedt 
Cc: Steven Miao 
Cc: Mark Salter 
Cc: Aurelien Jacquiot 
Cc: Mikael Starvik 
Cc: Jesper Nilsson 
Cc: David Howells 
Cc: Richard Kuo 
Cc: "Luck, Tony" 
Cc: Geert Uytterhoeven 
Cc: Michal Simek 
Cc: Ralf Baechle 
Cc: Jonas Bonn 
Cc: "James E.J. Bottomley" 
Cc: Helge Deller 
Cc: Benjamin Herrenschmidt 
Cc: Paul Mackerras 
Acked-by: Michael Ellerman  (powerpc)
Tested-by: Michael Ellerman  (powerpc)
Cc: Martin Schwidefsky 
Cc: Heiko Carstens 
Cc: Chen Liqin 
Cc: Lennox Wu 
Cc: Chris Metcalf 
Cc: Guan Xuetao 
Cc: Chris Zankel 
Cc: Max Filippov 
Cc: Oleg Nesterov 
Cc: Guenter Roeck 
Signed-off-by: James Hogan 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: make FIRST_USER_ADDRESS unsigned long on all archs

2015-02-12T01:06:03+00:00

LKP has triggered a compiler warning after my recent patch "mm: account
pmd page tables to the process":

    mm/mmap.c: In function 'exit_mmap':
 >> mm/mmap.c:2857:2: warning: right shift count >= width of type [enabled by default]

The code:

 > 2857                WARN_ON(mm_nr_pmds(mm) >
   2858                                round_up(FIRST_USER_ADDRESS, PUD_SIZE) >> PUD_SHIFT);

In this, on tile, we have FIRST_USER_ADDRESS defined as 0.  round_up() has
the same type -- int.  PUD_SHIFT.

I think the best way to fix it is to define FIRST_USER_ADDRESS as unsigned
long.  On every arch for consistency.

Signed-off-by: Kirill A. Shutemov 
Reported-by: Wu Fengguang 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

microblaze: define __PAGETABLE_PMD_FOLDED

2015-02-12T01:06:03+00:00

Microblaze uses custom implementation of PMD folding, but doesn't define
__PAGETABLE_PMD_FOLDED, which generic code expects to see.  Let's fix it.

Defining __PAGETABLE_PMD_FOLDED will drop out unused __pmd_alloc().  It
also fixes problems with recently-introduced pmd accounting.

Signed-off-by: Kirill A. Shutemov 
Reported-by: Guenter Roeck 
Tested-by: Guenter Roeck 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

2015-02-11T04:01:30+00:00

Pull networking updates from David Miller:

 1) More iov_iter conversion work from Al Viro.

    [ The "crypto: switch af_alg_make_sg() to iov_iter" commit was
      wrong, and this pull actually adds an extra commit on top of the
      branch I'm pulling to fix that up, so that the pre-merge state is
      ok.   - Linus ]

 2) Various optimizations to the ipv4 forwarding information base trie
    lookup implementation.  From Alexander Duyck.

 3) Remove sock_iocb altogether, from CHristoph Hellwig.

 4) Allow congestion control algorithm selection via routing metrics.
    From Daniel Borkmann.

 5) Make ipv4 uncached route list per-cpu, from Eric Dumazet.

 6) Handle rfs hash collisions more gracefully, also from Eric Dumazet.

 7) Add xmit_more support to r8169, e1000, and e1000e drivers.  From
    Florian Westphal.

 8) Transparent Ethernet Bridging support for GRO, from Jesse Gross.

 9) Add BPF packet actions to packet scheduler, from Jiri Pirko.

10) Add support for uniqu flow IDs to openvswitch, from Joe Stringer.

11) New NetCP ethernet driver, from Muralidharan Karicheri and Wingman
    Kwok.

12) More sanely handle out-of-window dupacks, which can result in
    serious ACK storms.  From Neal Cardwell.

13) Various rhashtable bug fixes and enhancements, from Herbert Xu,
    Patrick McHardy, and Thomas Graf.

14) Support xmit_more in be2net, from Sathya Perla.

15) Group Policy extensions for vxlan, from Thomas Graf.

16) Remove Checksum Offload support for vxlan, from Tom Herbert.

17) Like ipv4, support lockless transmit over ipv6 UDP sockets.  From
    Vlad Yasevich.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1494+1 commits)
  crypto: fix af_alg_make_sg() conversion to iov_iter
  ipv4: Namespecify TCP PMTU mechanism
  i40e: Fix for stats init function call in Rx setup
  tcp: don't include Fast Open option in SYN-ACK on pure SYN-data
  openvswitch: Only set TUNNEL_VXLAN_OPT if VXLAN-GBP metadata is set
  ipv6: Make __ipv6_select_ident static
  ipv6: Fix fragment id assignment on LE arches.
  bridge: Fix inability to add non-vlan fdb entry
  net: Mellanox: Delete unnecessary checks before the function call "vunmap"
  cxgb4: Add support in cxgb4 to get expansion rom version via ethtool
  ethtool: rename reserved1 memeber in ethtool_drvinfo for expansion ROM version
  net: dsa: Remove redundant phy_attach()
  IB/mlx4: Reset flow support for IB kernel ULPs
  IB/mlx4: Always use the correct port for mirrored multicast attachments
  net/bonding: Fix potential bad memory access during bonding events
  tipc: remove tipc_snprintf
  tipc: nl compat add noop and remove legacy nl framework
  tipc: convert legacy nl stats show to nl compat
  tipc: convert legacy nl net id get to nl compat
  tipc: convert legacy nl net id set to nl compat
  ...

Merge branch 'akpm' (patches from Andrew)

2015-02-11T00:45:56+00:00

Merge misc updates from Andrew Morton:
 "Bite-sized chunks this time, to avoid the MTA ratelimiting woes.

   - fs/notify updates

   - ocfs2

   - some of MM"

That laconic "some MM" is mainly the removal of remap_file_pages(),
which is a big simplification of the VM, and which gets rid of a *lot*
of random cruft and special cases because we no longer support the
non-linear mappings that it used.

From a user interface perspective, nothing has changed, because the
remap_file_pages() syscall still exists, it's just done by emulating the
old behavior by creating a lot of individual small mappings instead of
one non-linear one.

The emulation is slower than the old "native" non-linear mappings, but
nobody really uses or cares about remap_file_pages(), and simplifying
the VM is a big advantage.

* emailed patches from Andrew Morton : (78 commits)
  memcg: zap memcg_slab_caches and memcg_slab_mutex
  memcg: zap memcg_name argument of memcg_create_kmem_cache
  memcg: zap __memcg_{charge,uncharge}_slab
  mm/page_alloc.c: place zone_id check before VM_BUG_ON_PAGE check
  mm: hugetlb: fix type of hugetlb_treat_as_movable variable
  mm, hugetlb: remove unnecessary lower bound on sysctl handlers"?
  mm: memory: merge shared-writable dirtying branches in do_wp_page()
  mm: memory: remove ->vm_file check on shared writable vmas
  xtensa: drop _PAGE_FILE and pte_file()-related helpers
  x86: drop _PAGE_FILE and pte_file()-related helpers
  unicore32: drop pte_file()-related helpers
  um: drop _PAGE_FILE and pte_file()-related helpers
  tile: drop pte_file()-related helpers
  sparc: drop pte_file()-related helpers
  sh: drop _PAGE_FILE and pte_file()-related helpers
  score: drop _PAGE_FILE and pte_file()-related helpers
  s390: drop pte_file()-related helpers
  parisc: drop _PAGE_FILE and pte_file()-related helpers
  openrisc: drop _PAGE_FILE and pte_file()-related helpers
  nios2: drop _PAGE_FILE and pte_file()-related helpers
  ...

microblaze: drop _PAGE_FILE and pte_file()-related helpers

2015-02-10T22:30:32+00:00

We've replaced remap_file_pages(2) implementation with emulation.  Nobody
creates non-linear mapping anymore.

Signed-off-by: Kirill A. Shutemov 
Cc: Michal Simek 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge tag 'microblaze-3.20-rc1' of git://git.monstr.eu/linux-2.6-microblaze

2015-02-10T21:51:06+00:00

Pull Microblaze pupdates from Michal Simek:
 - Remove various compilation errors
 - Various code cleanup patches
 - Add missing MB versions/architectures for autodetection

* tag 'microblaze-3.20-rc1' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Remove *.dtb files in make clean
  microblaze: whitespace fix
  microblaze/uaccess: fix sparse errors
  microblaze: intc: Reformat output
  microblaze: intc: Refactor DT sanity check
  microblaze: intc: Don't override error codes
  microblaze: Add target architecture
  microblaze: Add missing PVR version codes
  microblaze: Fix variable types to remove W=1 warning
  microblaze: Use unsigned type for limit comparison in cache.c
  microblaze: Use unsigned type for proper comparison in cpuinfo*.c
  microblaze: Use unsigned type for "for" loop because of comparison-kgdb.c
  microblaze: Change extern inline to static inline
  microblaze: Mark get_frame_size as static
  microblaze: Use unsigned return type in do_syscall_trace_enter
  microblaze: Declare microblaze_kgdb_break in header
  microblaze: Remove unused prom header from reset.c
  microblaze: Remove unused prom_parse.c
  microblaze: Wire-up execveat syscall
  microblaze: Use empty asm-generic/linkage.h

microblaze: Remove *.dtb files in make clean

2015-02-10T15:24:39+00:00

dts/Makefile is called only for simpleImage target
which is causing that *.dtb are not removed.
This patch fix it.

Signed-off-by: Michal Simek