linux-stable.git/arch/microblaze/kernel, branch v6.5.2

Merge tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

2023-06-28T17:28:11+00:00

Pull mm updates from Andrew Morton:

 - Yosry Ahmed brought back some cgroup v1 stats in OOM logs

 - Yosry has also eliminated cgroup's atomic rstat flushing

 - Nhat Pham adds the new cachestat() syscall. It provides userspace
   with the ability to query pagecache status - a similar concept to
   mincore() but more powerful and with improved usability

 - Mel Gorman provides more optimizations for compaction, reducing the
   prevalence of page rescanning

 - Lorenzo Stoakes has done some maintanance work on the
   get_user_pages() interface

 - Liam Howlett continues with cleanups and maintenance work to the
   maple tree code. Peng Zhang also does some work on maple tree

 - Johannes Weiner has done some cleanup work on the compaction code

 - David Hildenbrand has contributed additional selftests for
   get_user_pages()

 - Thomas Gleixner has contributed some maintenance and optimization
   work for the vmalloc code

 - Baolin Wang has provided some compaction cleanups,

 - SeongJae Park continues maintenance work on the DAMON code

 - Huang Ying has done some maintenance on the swap code's usage of
   device refcounting

 - Christoph Hellwig has some cleanups for the filemap/directio code

 - Ryan Roberts provides two patch series which yield some
   rationalization of the kernel's access to pte entries - use the
   provided APIs rather than open-coding accesses

 - Lorenzo Stoakes has some fixes to the interaction between pagecache
   and directio access to file mappings

 - John Hubbard has a series of fixes to the MM selftesting code

 - ZhangPeng continues the folio conversion campaign

 - Hugh Dickins has been working on the pagetable handling code, mainly
   with a view to reducing the load on the mmap_lock

 - Catalin Marinas has reduced the arm64 kmalloc() minimum alignment
   from 128 to 8

 - Domenico Cerasuolo has improved the zswap reclaim mechanism by
   reorganizing the LRU management

 - Matthew Wilcox provides some fixups to make gfs2 work better with the
   buffer_head code

 - Vishal Moola also has done some folio conversion work

 - Matthew Wilcox has removed the remnants of the pagevec code - their
   functionality is migrated over to struct folio_batch

* tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (380 commits)
  mm/hugetlb: remove hugetlb_set_page_subpool()
  mm: nommu: correct the range of mmap_sem_read_lock in task_mem()
  hugetlb: revert use of page_cache_next_miss()
  Revert "page cache: fix page_cache_next/prev_miss off by one"
  mm/vmscan: fix root proactive reclaim unthrottling unbalanced node
  mm: memcg: rename and document global_reclaim()
  mm: kill [add|del]_page_to_lru_list()
  mm: compaction: convert to use a folio in isolate_migratepages_block()
  mm: zswap: fix double invalidate with exclusive loads
  mm: remove unnecessary pagevec includes
  mm: remove references to pagevec
  mm: rename invalidate_mapping_pagevec to mapping_try_invalidate
  mm: remove struct pagevec
  net: convert sunrpc from pagevec to folio_batch
  i915: convert i915_gpu_error to use a folio_batch
  pagevec: rename fbatch_count()
  mm: remove check_move_unevictable_pages()
  drm: convert drm_gem_put_pages() to use a folio_batch
  i915: convert shmem_sg_free_table() to use a folio_batch
  scatterlist: add sg_set_folio()
  ...

microblaze: allow pte_offset_map() to fail

2023-06-19T23:19:06+00:00

In rare transient cases, not yet made possible, pte_offset_map() and
pte_offset_map_lock() may not find a page table: handle appropriately.

Link: https://lkml.kernel.org/r/eab66faf-c0ab-3a8f-47bf-8a7c5af638f@google.com
Signed-off-by: Hugh Dickins 
Cc: Alexander Gordeev 
Cc: Alexandre Ghiti 
Cc: Aneesh Kumar K.V 
Cc: Catalin Marinas 
Cc: Christian Borntraeger 
Cc: Chris Zankel 
Cc: Claudio Imbrenda 
Cc: David Hildenbrand 
Cc: "David S. Miller" 
Cc: Geert Uytterhoeven 
Cc: Greg Ungerer 
Cc: Heiko Carstens 
Cc: Helge Deller 
Cc: "H. Peter Anvin" 
Cc: Ingo Molnar 
Cc: John David Anglin 
Cc: John Paul Adrian Glaubitz 
Cc: Kirill A. Shutemov 
Cc: Matthew Wilcox (Oracle) 
Cc: Max Filippov 
Cc: Michael Ellerman 
Cc: Michal Simek 
Cc: Mike Kravetz 
Cc: Mike Rapoport (IBM) 
Cc: Palmer Dabbelt 
Cc: Peter Zijlstra 
Cc: Qi Zheng 
Cc: Russell King 
Cc: Suren Baghdasaryan 
Cc: Thomas Bogendoerfer 
Cc: Thomas Gleixner 
Cc: Will Deacon 
Signed-off-by: Andrew Morton

of/flattree: Replace all non-returning strlcpy with strscpy

2023-06-14T19:04:06+00:00

strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().
No return values were used, so direct replacement is safe.

[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89

Signed-off-by: Azeem Shaikh 
Reviewed-by: Kees Cook 
Signed-off-by: Kees Cook 
Link: https://lore.kernel.org/r/20230530162202.983558-1-azeemshaikh38@gmail.com

cachestat: wire up cachestat for other architectures

2023-06-09T23:25:16+00:00

cachestat is previously only wired in for x86 (and architectures using
the generic unistd.h table):

https://lore.kernel.org/lkml/20230503013608.2431726-1-nphamcs@gmail.com/

This patch wires cachestat in for all the other architectures.

[nphamcs@gmail.com: wire up cachestat for arm64]
  Link: https://lkml.kernel.org/r/20230511092843.3896327-1-nphamcs@gmail.com
Link: https://lkml.kernel.org/r/20230510195806.2902878-1-nphamcs@gmail.com
Signed-off-by: Nhat Pham 
Tested-by: Michael Ellerman 	[powerpc]
Acked-by: Geert Uytterhoeven 	[m68k]
Reviewed-by: Arnd Bergmann 
Acked-by: Heiko Carstens 		[s390]
Cc: Alexander Gordeev 
Cc: Christian Borntraeger 
Cc: Christophe Leroy 
Cc: Chris Zankel 
Cc: David S. Miller 
Cc: Helge Deller 
Cc: Ivan Kokshaysky 
Cc: "James E.J. Bottomley" 
Cc: Johannes Weiner 
Cc: John Paul Adrian Glaubitz 
Cc: Matt Turner 
Cc: Max Filippov 
Cc: Michal Simek 
Cc: Nicholas Piggin 
Cc: Richard Henderson 
Cc: Rich Felker 
Cc: Russell King 
Cc: Sven Schnelle 
Cc: Thomas Bogendoerfer 
Cc: Vasily Gorbik 
Cc: Yoshinori Sato 
Signed-off-by: Andrew Morton

arch/idle: Change arch_cpu_idle() behavior: always exit with IRQs disabled

2023-01-13T10:48:15+00:00

Current arch_cpu_idle() is called with IRQs disabled, but will return
with IRQs enabled.

However, the very first thing the generic code does after calling
arch_cpu_idle() is raw_local_irq_disable(). This means that
architectures that can idle with IRQs disabled end up doing a
pointless 'enable-disable' dance.

Therefore, push this IRQ disabling into the idle function, meaning
that those architectures can avoid the pointless IRQ state flipping.

Signed-off-by: Peter Zijlstra (Intel) 
Signed-off-by: Ingo Molnar 
Tested-by: Tony Lindgren 
Tested-by: Ulf Hansson 
Reviewed-by: Gautham R. Shenoy 
Acked-by: Mark Rutland  [arm64]
Acked-by: Rafael J. Wysocki 
Acked-by: Guo Ren 
Acked-by: Frederic Weisbecker 
Link: https://lore.kernel.org/r/20230112195540.618076436@infradead.org

objtool/idle: Validate __cpuidle code as noinstr

2023-01-13T10:48:15+00:00

Idle code is very like entry code in that RCU isn't available. As
such, add a little validation.

Signed-off-by: Peter Zijlstra (Intel) 
Signed-off-by: Ingo Molnar 
Tested-by: Tony Lindgren 
Tested-by: Ulf Hansson 
Acked-by: Geert Uytterhoeven 
Acked-by: Rafael J. Wysocki 
Acked-by: Frederic Weisbecker 
Link: https://lore.kernel.org/r/20230112195540.373461409@infradead.org

[elf][non-regset] uninline elf_core_copy_task_fpregs() (and lose pt_regs argument)

2022-11-25T04:24:23+00:00

Don't bother with pointless macros - we are not sharing it with aout coredumps
anymore.  Just convert the underlying functions to the same arguments (nobody
uses regs, actually) and call them elf_core_copy_task_fpregs().  And unexport
the entire bunch, while we are at it.

[added missing includes in arch/{csky,m68k,um}/kernel/process.c to avoid extra
warnings about the lack of externs getting added to huge piles for those
files.  Pointless, but...]

Signed-off-by: Al Viro

Merge tag 'kbuild-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

2022-10-10T19:00:45+00:00

Pull Kbuild updates from Masahiro Yamada:

- Remove potentially incomplete targets when Kbuid is interrupted by
SIGINT etc in case GNU Make may miss to do that when stderr is piped
to another program.

- Rewrite the single target build so it works more correctly.

- Fix rpm-pkg builds with V=1.

- List top-level subdirectories in ./Kbuild.

- Ignore auto-generated __kstrtab_* and __kstrtabns_* symbols in
kallsyms.

- Avoid two different modules in lib/zstd/ having shared code, which
potentially causes building the common code as build-in and modular
back-and-forth.

- Unify two modpost invocations to optimize the build process.

- Remove head-y syntax in favor of linker scripts for placing
particular sections in the head of vmlinux.

- Bump the minimal GNU Make version to 3.82.

- Clean up misc Makefiles and scripts.

* tag 'kbuild-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (41 commits)
docs: bump minimal GNU Make version to 3.82
ia64: simplify esi object addition in Makefile
Revert "kbuild: Check if linker supports the -X option"
kbuild: rebuild .vmlinux.export.o when its prerequisite is updated
kbuild: move modules.builtin(.modinfo) rules to Makefile.vmlinux_o
zstd: Fixing mixed module-builtin objects
kallsyms: ignore __kstrtab_* and __kstrtabns_* symbols
kallsyms: take the input file instead of reading stdin
kallsyms: drop duplicated ignore patterns from kallsyms.c
kbuild: reuse mksysmap output for kallsyms
mksysmap: update comment about __crc_*
kbuild: remove head-y syntax
kbuild: use obj-y instead extra-y for objects placed at the head
kbuild: hide error checker logs for V=1 builds
kbuild: re-run modpost when it is updated
kbuild: unify two modpost invocations
kbuild: move vmlinux.o rule to the top Makefile
kbuild: move .vmlinux.objs rule to Makefile.modpost
kbuild: list sub-directories in ./Kbuild
Makefile.compiler: replace cc-ifversion with compiler-specific macros
...

kbuild: use obj-y instead extra-y for objects placed at the head

2022-10-02T09:04:05+00:00

The objects placed at the head of vmlinux need special treatments:

 - arch/$(SRCARCH)/Makefile adds them to head-y in order to place
   them before other archives in the linker command line.

 - arch/$(SRCARCH)/kernel/Makefile adds them to extra-y instead of
   obj-y to avoid them going into built-in.a.

This commit gets rid of the latter.

Create vmlinux.a to collect all the objects that are unconditionally
linked to vmlinux. The objects listed in head-y are moved to the head
of vmlinux.a by using 'ar m'.

With this, arch/$(SRCARCH)/kernel/Makefile can consistently use obj-y
for builtin objects.

There is no *.o that is directly linked to vmlinux. Drop unneeded code
in scripts/clang-tools/gen_compile_commands.py.

$(AR) mPi needs 'T' to workaround the llvm-ar bug. The fix was suggested
by Nathan Chancellor [1].

[1]: https://lore.kernel.org/llvm/YyjjT5gQ2hGMH0ni@dev-arch.thelio-3990X/

Signed-off-by: Masahiro Yamada 
Tested-by: Nick Desaulniers 
Reviewed-by: Nicolas Schier

microblaze: Add support for error injection

2022-09-26T12:13:29+00:00

To inject the error using the tmr inject IP reset vectors need to be placed
in lmb(bram) due to the limitation in HW when this code runs out of DDR.
Below code adds the error inject code to the .init.ivt section to copy
it in machine_early_init to lmb/Bram location. C_BASE_VECTORS which allow
moving reset vectors out of 0 location is not currently supported by
Microblaze architecture, that's why all the time reset vectors with
injection code is all the time copied to address 0.

As of now getting this functionality working CPU switches to real mode
and simply jumps to bram, which causes triggering of fault which continues
to call_xmb_manager_break break handler which will at the end calls the
error count callback function and performs recovery.

Signed-off-by: Appana Durga Kedareswara rao 
Link: https://lore.kernel.org/r/20220627064024.771037-4-appana.durga.rao@xilinx.com
Signed-off-by: Michal Simek