linux-stable.git/arch/microblaze/kernel, branch v5.8

mm: pgtable: add shortcuts for accessing kernel PMD and PTE

2020-06-09T16:39:13+00:00

The powerpc 32-bit implementation of pgtable has nice shortcuts for
accessing kernel PMD and PTE for a given virtual address.  Make these
helpers available for all architectures.

[rppt@linux.ibm.com: microblaze: fix page table traversal in setup_rt_frame()]
  Link: http://lkml.kernel.org/r/20200518191511.GD1118872@kernel.org
[akpm@linux-foundation.org: s/pmd_ptr_k/pmd_off_k/ in various powerpc places]

Signed-off-by: Mike Rapoport 
Signed-off-by: Andrew Morton 
Cc: Arnd Bergmann 
Cc: Borislav Petkov 
Cc: Brian Cain 
Cc: Catalin Marinas 
Cc: Chris Zankel 
Cc: "David S. Miller" 
Cc: Geert Uytterhoeven 
Cc: Greentime Hu 
Cc: Greg Ungerer 
Cc: Guan Xuetao 
Cc: Guo Ren 
Cc: Heiko Carstens 
Cc: Helge Deller 
Cc: Ingo Molnar 
Cc: Ley Foon Tan 
Cc: Mark Salter 
Cc: Matthew Wilcox 
Cc: Matt Turner 
Cc: Max Filippov 
Cc: Michael Ellerman 
Cc: Michal Simek 
Cc: Nick Hu 
Cc: Paul Walmsley 
Cc: Richard Weinberger 
Cc: Rich Felker 
Cc: Russell King 
Cc: Stafford Horne 
Cc: Thomas Bogendoerfer 
Cc: Thomas Gleixner 
Cc: Tony Luck 
Cc: Vincent Chen 
Cc: Vineet Gupta 
Cc: Will Deacon 
Cc: Yoshinori Sato 
Link: http://lkml.kernel.org/r/20200514170327.31389-9-rppt@kernel.org
Signed-off-by: Linus Torvalds

mm: reorder includes after introduction of linux/pgtable.h

2020-06-09T16:39:13+00:00

The replacement of  with  made the include
of the latter in the middle of asm includes.  Fix this up with the aid of
the below script and manual adjustments here and there.

	import sys
	import re

	if len(sys.argv) is not 3:
	    print "USAGE: %s  " % (sys.argv[0])
	    sys.exit(1)

	hdr_to_move="#include " % sys.argv[2]
	moved = False
	in_hdrs = False

	with open(sys.argv[1], "r") as f:
	    lines = f.readlines()
	    for _line in lines:
		line = _line.rstrip('
')
		if line == hdr_to_move:
		    continue
		if line.startswith("#include 
Signed-off-by: Andrew Morton 
Cc: Arnd Bergmann 
Cc: Borislav Petkov 
Cc: Brian Cain 
Cc: Catalin Marinas 
Cc: Chris Zankel 
Cc: "David S. Miller" 
Cc: Geert Uytterhoeven 
Cc: Greentime Hu 
Cc: Greg Ungerer 
Cc: Guan Xuetao 
Cc: Guo Ren 
Cc: Heiko Carstens 
Cc: Helge Deller 
Cc: Ingo Molnar 
Cc: Ley Foon Tan 
Cc: Mark Salter 
Cc: Matthew Wilcox 
Cc: Matt Turner 
Cc: Max Filippov 
Cc: Michael Ellerman 
Cc: Michal Simek 
Cc: Nick Hu 
Cc: Paul Walmsley 
Cc: Richard Weinberger 
Cc: Rich Felker 
Cc: Russell King 
Cc: Stafford Horne 
Cc: Thomas Bogendoerfer 
Cc: Thomas Gleixner 
Cc: Tony Luck 
Cc: Vincent Chen 
Cc: Vineet Gupta 
Cc: Will Deacon 
Cc: Yoshinori Sato 
Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org
Signed-off-by: Linus Torvalds

mm: introduce include/linux/pgtable.h

2020-06-09T16:39:13+00:00

The include/linux/pgtable.h is going to be the home of generic page table
manipulation functions.

Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and
make the latter include asm/pgtable.h.

Signed-off-by: Mike Rapoport 
Signed-off-by: Andrew Morton 
Cc: Arnd Bergmann 
Cc: Borislav Petkov 
Cc: Brian Cain 
Cc: Catalin Marinas 
Cc: Chris Zankel 
Cc: "David S. Miller" 
Cc: Geert Uytterhoeven 
Cc: Greentime Hu 
Cc: Greg Ungerer 
Cc: Guan Xuetao 
Cc: Guo Ren 
Cc: Heiko Carstens 
Cc: Helge Deller 
Cc: Ingo Molnar 
Cc: Ley Foon Tan 
Cc: Mark Salter 
Cc: Matthew Wilcox 
Cc: Matt Turner 
Cc: Max Filippov 
Cc: Michael Ellerman 
Cc: Michal Simek 
Cc: Nick Hu 
Cc: Paul Walmsley 
Cc: Richard Weinberger 
Cc: Rich Felker 
Cc: Russell King 
Cc: Stafford Horne 
Cc: Thomas Bogendoerfer 
Cc: Thomas Gleixner 
Cc: Tony Luck 
Cc: Vincent Chen 
Cc: Vineet Gupta 
Cc: Will Deacon 
Cc: Yoshinori Sato 
Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org
Signed-off-by: Linus Torvalds

mm: don't include asm/pgtable.h if linux/mm.h is already included

2020-06-09T16:39:13+00:00

Patch series "mm: consolidate definitions of page table accessors", v2.

The low level page table accessors (pXY_index(), pXY_offset()) are
duplicated across all architectures and sometimes more than once.  For
instance, we have 31 definition of pgd_offset() for 25 supported
architectures.

Most of these definitions are actually identical and typically it boils
down to, e.g.

static inline unsigned long pmd_index(unsigned long address)
{
        return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1);
}

static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address)
{
        return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address);
}

These definitions can be shared among 90% of the arches provided
XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined.

For architectures that really need a custom version there is always
possibility to override the generic version with the usual ifdefs magic.

These patches introduce include/linux/pgtable.h that replaces
include/asm-generic/pgtable.h and add the definitions of the page table
accessors to the new header.

This patch (of 12):

The linux/mm.h header includes  to allow inlining of the
functions involving page table manipulations, e.g.  pte_alloc() and
pmd_alloc().  So, there is no point to explicitly include 
in the files that include .

The include statements in such cases are remove with a simple loop:

	for f in $(git grep -l "include ") ; do
		sed -i -e '/include / d' $f
	done

Signed-off-by: Mike Rapoport 
Signed-off-by: Andrew Morton 
Cc: Arnd Bergmann 
Cc: Borislav Petkov 
Cc: Brian Cain 
Cc: Catalin Marinas 
Cc: Chris Zankel 
Cc: "David S. Miller" 
Cc: Geert Uytterhoeven 
Cc: Greentime Hu 
Cc: Greg Ungerer 
Cc: Guan Xuetao 
Cc: Guo Ren 
Cc: Heiko Carstens 
Cc: Helge Deller 
Cc: Ingo Molnar 
Cc: Ley Foon Tan 
Cc: Mark Salter 
Cc: Matthew Wilcox 
Cc: Matt Turner 
Cc: Max Filippov 
Cc: Michael Ellerman 
Cc: Michal Simek 
Cc: Mike Rapoport 
Cc: Nick Hu 
Cc: Paul Walmsley 
Cc: Richard Weinberger 
Cc: Rich Felker 
Cc: Russell King 
Cc: Stafford Horne 
Cc: Thomas Bogendoerfer 
Cc: Thomas Gleixner 
Cc: Tony Luck 
Cc: Vincent Chen 
Cc: Vineet Gupta 
Cc: Will Deacon 
Cc: Yoshinori Sato 
Link: http://lkml.kernel.org/r/20200514170327.31389-1-rppt@kernel.org
Link: http://lkml.kernel.org/r/20200514170327.31389-2-rppt@kernel.org
Signed-off-by: Linus Torvalds

kernel: rename show_stack_loglvl() => show_stack()

2020-06-09T16:39:13+00:00

Now the last users of show_stack() got converted to use an explicit log
level, show_stack_loglvl() can drop it's redundant suffix and become once
again well known show_stack().

Signed-off-by: Dmitry Safonov 
Signed-off-by: Andrew Morton 
Link: http://lkml.kernel.org/r/20200418201944.482088-51-dima@arista.com
Signed-off-by: Linus Torvalds

microblaze: add show_stack_loglvl()

2020-06-09T16:39:11+00:00

Currently, the log-level of show_stack() depends on a platform
realization.  It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).

Furthermore, it forces the logic decision from user to an architecture
side.  In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages.  And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.

Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers.  Also, it will consolidate
printings with headers.

Introduce show_stack_loglvl(), that eventually will substitute
show_stack().

[1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#u

Signed-off-by: Dmitry Safonov 
Signed-off-by: Andrew Morton 
Cc: Michal Simek 
Link: http://lkml.kernel.org/r/20200418201944.482088-21-dima@arista.com
Signed-off-by: Linus Torvalds

microblaze: add loglvl to microblaze_unwind()

2020-06-09T16:39:11+00:00

Currently, the log-level of show_stack() depends on a platform
realization.  It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).

Furthermore, it forces the logic decision from user to an architecture
side.  In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages.  And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.

Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers.  Also, it will consolidate
printings with headers.

Add log level parameter to microblaze_unwind() as a preparation to add
show_stack_loglvl().

[1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#u

Signed-off-by: Dmitry Safonov 
Signed-off-by: Andrew Morton 
Cc: Michal Simek 
Link: http://lkml.kernel.org/r/20200418201944.482088-20-dima@arista.com
Signed-off-by: Linus Torvalds

microblaze: add loglvl to microblaze_unwind_inner()

2020-06-09T16:39:11+00:00

Currently, the log-level of show_stack() depends on a platform
realization.  It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).

Furthermore, it forces the logic decision from user to an architecture
side.  In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages.  And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.

Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers.  Also, it will consolidate
printings with headers.

Add log level argument to microblaze_unwind_inner() as a preparation for
introducing show_stack_loglvl().

[1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#u

Signed-off-by: Dmitry Safonov 
Signed-off-by: Andrew Morton 
Cc: Michal Simek 
Link: http://lkml.kernel.org/r/20200418201944.482088-19-dima@arista.com
Signed-off-by: Linus Torvalds

kallsyms/printk: add loglvl to print_ip_sym()

2020-06-09T16:39:10+00:00

Patch series "Add log level to show_stack()", v3.

Add log level argument to show_stack().

Done in three stages:
1. Introducing show_stack_loglvl() for every architecture
2. Migrating old users with an explicit log level
3. Renaming show_stack_loglvl() into show_stack()

Justification:

- It's a design mistake to move a business-logic decision into platform
  realization detail.

- I have currently two patches sets that would benefit from this work:
  Removing console_loglevel jumps in sysrq driver [1] Hung task warning
  before panic [2] - suggested by Tetsuo (but he probably didn't realise
  what it would involve).

- While doing (1), (2) the backtraces were adjusted to headers and other
  messages for each situation - so there won't be a situation when the
  backtrace is printed, but the headers are missing because they have
  lesser log level (or the reverse).

- As the result in (2) plays with console_loglevel for kdb are removed.

The least important for upstream, but maybe still worth to note that every
company I've worked in so far had an off-list patch to print backtrace
with the needed log level (but only for the architecture they cared
about).  If you have other ideas how you will benefit from show_stack()
with a log level - please, reply to this cover letter.

See also discussion on v1:
https://lore.kernel.org/linux-riscv/20191106083538.z5nlpuf64cigxigh@pathway.suse.cz/

This patch (of 50):

print_ip_sym() needs to have a log level parameter to comply with other
parts being printed.  Otherwise, half of the expected backtrace would be
printed and other may be missing with some logging level.

The following callee(s) are using now the adjusted log level:
- microblaze/unwind: the same level as headers & userspace unwind.
  Note that pr_debug()'s there are for debugging the unwinder itself.
- nds32/traps: symbol addresses are printed with the same log level
  as backtrace headers.
- lockdep: ip for locking issues is printed with the same log level
  as other part of the warning.
- sched: ip where preemption was disabled is printed as error like
  the rest part of the message.
- ftrace: bug reports are now consistent in the log level being used.

Signed-off-by: Dmitry Safonov 
Signed-off-by: Andrew Morton 
Acked-by: Steven Rostedt (VMware) 
Cc: Albert Ou 
Cc: Ben Segall 
Cc: Dietmar Eggemann 
Cc: Greentime Hu 
Cc: Greg Kroah-Hartman 
Cc: Ingo Molnar 
Cc: James Hogan 
Cc: Juri Lelli 
Cc: Mel Gorman 
Cc: Michal Simek 
Cc: Palmer Dabbelt 
Cc: Paul Burton 
Cc: Paul Walmsley 
Cc: Peter Zijlstra 
Cc: Ralf Baechle 
Cc: Thomas Gleixner 
Cc: Vincent Chen 
Cc: Vincent Guittot 
Cc: Will Deacon 
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Dmitry Safonov 
Cc: Jiri Slaby 
Cc: Petr Mladek 
Cc: Sergey Senozhatsky 
Cc: Ivan Kokshaysky 
Cc: Matt Turner 
Cc: Richard Henderson 
Cc: Vineet Gupta 
Cc: Russell King 
Cc: Catalin Marinas 
Cc: Aurelien Jacquiot 
Cc: Mark Salter 
Cc: Guo Ren 
Cc: Yoshinori Sato 
Cc: Brian Cain 
Cc: Fenghua Yu 
Cc: Tony Luck 
Cc: Geert Uytterhoeven 
Cc: Ley Foon Tan 
Cc: Jonas Bonn 
Cc: Stafford Horne 
Cc: Stefan Kristiansson 
Cc: Helge Deller 
Cc: "James E.J. Bottomley" 
Cc: Benjamin Herrenschmidt 
Cc: Michael Ellerman 
Cc: Paul Mackerras 
Cc: Christian Borntraeger 
Cc: Heiko Carstens 
Cc: Vasily Gorbik 
Cc: Rich Felker 
Cc: "David S. Miller" 
Cc: Anton Ivanov 
Cc: Jeff Dike 
Cc: Richard Weinberger 
Cc: Guan Xuetao 
Cc: Borislav Petkov 
Cc: "H. Peter Anvin" 
Cc: Chris Zankel 
Cc: Max Filippov 
Cc: Len Brown 
Cc: Pavel Machek 
Cc: "Rafael J. Wysocki" 
Cc: "Rafael J. Wysocki" 
Cc: Daniel Thompson 
Cc: Douglas Anderson 
Cc: Jason Wessel 
Link: http://lkml.kernel.org/r/20200418201944.482088-2-dima@arista.com
Signed-off-by: Linus Torvalds

Merge branch 'from-miklos' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2020-06-01T23:44:06+00:00

Pull vfs updates from Al Viro:
 "Assorted patches from Miklos.

  An interesting part here is /proc/mounts stuff..."

The "/proc/mounts stuff" is using a cursor for keeeping the location
data while traversing the mount listing.

Also probably worth noting is the addition of faccessat2(), which takes
an additional set of flags to specify how the lookup is done
(AT_EACCESS, AT_SYMLINK_NOFOLLOW, AT_EMPTY_PATH).

* 'from-miklos' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  vfs: add faccessat2 syscall
  vfs: don't parse "silent" option
  vfs: don't parse "posixacl" option
  vfs: don't parse forbidden flags
  statx: add mount_root
  statx: add mount ID
  statx: don't clear STATX_ATIME on SB_RDONLY
  uapi: deprecate STATX_ALL
  utimensat: AT_EMPTY_PATH support
  vfs: split out access_override_creds()
  proc/mounts: add cursor
  aio: fix async fsync creds
  vfs: allow unprivileged whiteout creation