Pull generic entry code updates from Thomas Gleixner:

 - Make syscall user dispatching configurable

   Not all architectures can makes use of syscall user dispatching.
   Allow them to disable the feature completely.

 - Consolidate stack randomization for the generic entry code and the
   architectures using it.

   Stack randomization on syscall entry was sprinkled throughout the
   architecture specific low level entry code and in some cases at the
   wrong points, e.g. before establishing state, which violates the
   non-instrumentable constraints of that code.

   Clean this up by integrating stack randomization into the generic
   entry code helpers so that it is invoked at the earliest possible
   point right after establishing state and converting all generic entry
   code using architecture over.

 - Clean up the syscall number handling in the generic entry code. It
   works correctly for architectures which have a separate return value
   storage in pt_regs, but fails to distinguish the case where user
   space handed in -1 as syscall number from the case where the entry
   code rejects it by returning -1 to the callers. Aside of that the
   return value functionality of those interfaces is not really
   intuitive.

   Fix this by separating the decision to reject a syscall (user
   dispatch, ptrace, seccomp ...) from the potential modification of the
   syscall number through these mechanisms.

   This solves most of the problems for architectures which do not have
   a separate return value storage in pt_regs except for the case where
   a tracepoint has a BPF script or a probe attached which overwrite
   both the syscall number and the return value. But that's a problem
   which cannot be solved in the generic code, that only can be
   addressed by separating the storage model in the affected
   architectures.

* tag 'core-entry-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  entry, treewide: Make syscall_enter_from_user_mode[_work]() indicate syscall execution
  entry: Make return type of syscall_trace_enter() bool
  entry: Rework trace_syscall_enter()
  entry: Rework syscall_audit_enter()
  syscall_user_dispatch: Introduce ARCH_SUPPORTS_SYSCALL_USER_DISPATCH
  entry: Fix seccomp bypass after ptrace with TSYNC
  x86/entry: Simplify the syscall number logic
  x86/entry: Get rid of the sys_ni_syscall() indirection
  x86/entry: Make syscall functions static
  ptrace, treewide: Rename ptrace_report_syscall_entry() to ptrace_report_syscall_permit_entry()
  seccomp, treewide: Rename and convert __secure_computing() to return boolean
  entry: Use syscall number instead of rereading it
  entry: Remove syscall_enter_from_user_mode()
  x86/syscall: Use [syscall_]enter_from_user_mode_randomize_stack()
  s390/syscall: Use enter_from_user_mode_randomize_stack()
  riscv/syscall: Use syscall_enter_from_user_mode_randomize_stack()
  powerpc/syscall: Use syscall_enter_from_user_mode_randomize_stack()
  loongarch/syscall: Use syscall_enter_from_user_mode_randomize_stack()
  entry: Provide [syscall_]enter_from_user_mode_randomize_stack()
  randomize_kstack: Provide add_random_kstack_offset_irqsoff()
  ...

Pull failfs filesystem from Christian Brauner:
 "Add failfs and expose a FD_FAILFS_ROOT sentinel.

  This allows userspace to shed their filesystem state completely. A
  process with its root or working directory in failfs must anchor every
  path lookup at an explicit file descriptor. Absolute paths, absolute
  symlinks and AT_FDCWD-relative lookups simply fail.

  Failfs is the counterpart to nullfs. nullfs says adds a permanently
  empty, immutable directory whose lookups fail with ENOENT but which
  can be opened, read, stat'd and mounted upon. Failfs on the other hand
  fails every operation. The root cannot be opened at all. A single
  instance is mounted during early boot via kern_mount(), which makes it
  logically distinct from every mount namespace.

  This is accompanied by a new fchroot() system call which makes
  chrooting via a file descriptor a first class concept. It's possible
  to chroot into failfs as an unprivileged user provided the task has no
  new privileges set"

* tag 'vfs-7.3-rc1.failfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  Documentation: add failfs documentation
  selftests/filesystems: add failfs selftests
  arch: hookup fchroot() system call
  fs: support FD_FAILFS_ROOT in fchroot()
  fs: add fchroot()
  fs: support FD_FAILFS_ROOT in fchdir()
  fs: add failfs

microblaze handles TLB misses in software, and the handler builds the
address of the L1 entry by ORing the index into the page directory base
instead of adding it (hw_exception_handler.S):

		bsrli	r5, r3, PGDIR_SHIFT - 2
		andi	r5, r5, PAGE_SIZE - 4
	/* Assume pgdir aligned on 4K boundary, no need for
	   "andi r4,r4,0xfffff003" */
		or	r4, r4, r5
		lwi	r4, r4, 0		/* Get L1 entry */

The index is masked to the low 12 bits, so the OR only works if those bits
of the base are zero -- which is exactly the assumption the comment states
and the reason the masking of the base can be skipped.

swapper_pg_dir had no alignment directive of its own.  It was aligned
because it followed empty_zero_page in head.S, and that one carried the
.align 12:

	.section .data
	.global empty_zero_page
	.align 12
	empty_zero_page:
		.space	PAGE_SIZE
	.global swapper_pg_dir
	swapper_pg_dir:
		.space	PAGE_SIZE

Commit 6215d9f4470f ("arch, mm: consolidate empty_zero_page") removed
empty_zero_page from head.S, and with it the .align 12 that -- despite
sitting next to empty_zero_page -- was what page aligned swapper_pg_dir. 
Since then swapper_pg_dir lands wherever .data happens to put it, its low
bits are no longer zero, and every kernel TLB miss ORs the index into a
base with a nonzero offset.  The resulting L1 lookups read the wrong
words, no valid translation is ever installed, and the kernel spins in
exceptions long before it can print anything.  On qemu-system-microblazeel
(petalogix-s3adsp1800) the console stays completely silent at 100% CPU;
there is no oops and no guest error reported by qemu, which makes this
awkward to diagnose.

Give swapper_pg_dir the alignment it requires, rather than relying on a
neighbour to provide it.

microblaze has no noMMU variant left in mainline -- CONFIG_MMU is def_bool
y and mmu_defconfig is the only defconfig -- so this is not a corner case:
every mainline microblaze kernel since v7.1-rc1 fails to boot, including
the v7.1 release.

	v7.0:                    swapper_pg_dir = 0xc05fd000  (aligned)
	v7.1-rc1:                swapper_pg_dir = 0xc0603140  (offset 320)
	v7.1-rc1 + this fix:     swapper_pg_dir = 0xc0604000  (aligned)
	next-20260726:           swapper_pg_dir = 0xc0615140  (offset 320)
	next-20260726 + this fix: swapper_pg_dir = 0xc0616000  (aligned)

Verified on qemu-system-microblazeel (petalogix-s3adsp1800) with
mmu_defconfig and microblazeel gcc 12.5.0: v7.1-rc1 and next-20260726 both
print nothing at all without the fix, and both boot to userspace with it.

Link: https://lore.kernel.org/20260727215823.1422701-1-ramin.moussavi@yacoub.de
Fixes: 6215d9f4470f ("arch, mm: consolidate empty_zero_page")
Signed-off-by: Ramin Moussavi <ramin.moussavi@yacoub.de>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Wire up the fchroot() system call as number 472 on (nearly) all
architectures and sync the mirrored copies of the syscall tables and
the asm-generic unistd.h under tools/.

Link: https://patch.msgid.link/20260724-work-failfs-v2-5-485dabbae185@kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>

The return value of that function is boolean and tells the caller whether
to permit the syscall processing or not.

Rename the function so the purpose is clear and make the return type bool.

Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Mukesh Kumar Chaurasiya (IBM) <mkchauras@gmail.com>
Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Radu Rendec <radu@rendec.net>
Reviewed-by: Mukesh Kumar Chaurasiya (IBM) <mkchauras@gmail.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://patch.msgid.link/20260707190254.280015701@kernel.org

Reduce 22 declarations of empty_zero_page to 3 and 23 declarations of
ZERO_PAGE() to 4.

Every architecture defines empty_zero_page that way or another, but for the
most of them it is always a page aligned page in BSS and most definitions
of ZERO_PAGE do virt_to_page(empty_zero_page).

Move Linus vetted x86 definition of empty_zero_page and ZERO_PAGE() to the
core MM and drop these definitions in architectures that do not implement
colored zero page (MIPS and s390).

ZERO_PAGE() remains a macro because turning it to a wrapper for a static
inline causes severe pain in header dependencies.

For the most part the change is mechanical, with these being noteworthy:

* alpha: aliased empty_zero_page with ZERO_PGE that was also used for boot
  parameters. Switching to a generic empty_zero_page removes the aliasing
  and keeps ZERO_PGE for boot parameters only
* arm64: uses __pa_symbol() in ZERO_PAGE() so that definition of
  ZERO_PAGE() is kept intact.
* m68k/parisc/um: allocated empty_zero_page from memblock,
  although they do not support zero page coloring and having it in BSS
  will work fine.
* sparc64 can have empty_zero_page in BSS rather allocate it, but it
  can't use virt_to_page() for BSS. Keep it's definition of ZERO_PAGE()
  but instead of allocating it, make mem_map_zero point to
  empty_zero_page.
* sh: used empty_zero_page for boot parameters at the very early boot.
  Rename the parameters page to boot_params_page and let sh use the generic
  empty_zero_page.
* hexagon: had an amusing comment about empty_zero_page

	/* A handy thing to have if one has the RAM. Declared in head.S */

  that unfortunately had to go :)

Link: https://lkml.kernel.org/r/20260211103141.3215197-4-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Helge Deller <deller@gmx.de>		[parisc]
Tested-by: Helge Deller <deller@gmx.de>		[parisc]
Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Magnus Lindholm <linmag7@gmail.com>	[alpha]
Acked-by: Dinh Nguyen <dinguyen@kernel.org>	[nios2]
Acked-by: Andreas Larsson <andreas@gaisler.com>	[sparc]
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Acked-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: "Borislav Petkov (AMD)" <bp@alien8.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Provide a new syscall which has the only purpose to yield the CPU after the
kernel granted a time slice extension.

sched_yield() is not suitable for that because it unconditionally
schedules, but the end of the time slice extension is not required to
schedule when the task was already preempted. This also allows to have a
strict check for termination to catch user space invoking random syscalls
including sched_yield() from a time slice extension region.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20251215155708.929634896@linutronix.de

Add the listns() system call to all architectures.

Link: https://patch.msgid.link/20251029-work-namespace-nstree-listns-v4-20-2e6f823ebdc0@kernel.org
Tested-by: syzbot@syzkaller.appspotmail.com
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>

Pull scheduler updates from Ingo Molnar:
 "Core scheduler changes:

   - Make migrate_{en,dis}able() inline, to improve performance
     (Menglong Dong)

   - Move STDL_INIT() functions out-of-line (Peter Zijlstra)

   - Unify the SCHED_{SMT,CLUSTER,MC} Kconfig (Peter Zijlstra)

  Fair scheduling:

   - Defer throttling to when tasks exit to user-space, to reduce the
     chance & impact of throttle-preemption with held locks and other
     resources (Aaron Lu, Valentin Schneider)

   - Get rid of sched_domains_curr_level hack for tl->cpumask(), as the
     warning was getting triggered on certain topologies (Peter
     Zijlstra)

  Misc cleanups & fixes:

   - Header cleanups (Menglong Dong)

   - Fix race in push_dl_task() (Harshit Agarwal)"

* tag 'sched-core-2025-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Fix some typos in include/linux/preempt.h
  sched: Make migrate_{en,dis}able() inline
  rcu: Replace preempt.h with sched.h in include/linux/rcupdate.h
  arch: Add the macro COMPILE_OFFSETS to all the asm-offsets.c
  sched/fair: Do not balance task to a throttled cfs_rq
  sched/fair: Do not special case tasks in throttled hierarchy
  sched/fair: update_cfs_group() for throttled cfs_rqs
  sched/fair: Propagate load for throttled cfs_rq
  sched/fair: Get rid of throttled_lb_pair()
  sched/fair: Task based throttle time accounting
  sched/fair: Switch to task based throttle model
  sched/fair: Implement throttle task work and related helpers
  sched/fair: Add related data structure for task based throttle
  sched: Unify the SCHED_{SMT,CLUSTER,MC} Kconfig
  sched: Move STDL_INIT() functions out-of-line
  sched/fair: Get rid of sched_domains_curr_level hack for tl->cpumask()
  sched/deadline: Fix race in push_dl_task()

The include/generated/asm-offsets.h is generated in Kbuild during
compiling from arch/SRCARCH/kernel/asm-offsets.c. When we want to
generate another similar offset header file, circular dependency can
happen.

For example, we want to generate a offset file include/generated/test.h,
which is included in include/sched/sched.h. If we generate asm-offsets.h
first, it will fail, as include/sched/sched.h is included in asm-offsets.c
and include/generated/test.h doesn't exist; If we generate test.h first,
it can't success neither, as include/generated/asm-offsets.h is included
by it.

In x86_64, the macro COMPILE_OFFSETS is used to avoid such circular
dependency. We can generate asm-offsets.h first, and if the
COMPILE_OFFSETS is defined, we don't include the "generated/test.h".

And we define the macro COMPILE_OFFSETS for all the asm-offsets.c for this
purpose.

Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>