linux-stable.git/arch/hexagon/include/asm, branch linux-4.4.y

hexagon: modify ffs() and fls() to return int

2018-10-10T06:52:12+00:00

[ Upstream commit 5c41aaad409c097cf1ef74f2c649fed994744ef5 ]

Building drivers/mtd/nand/raw/nandsim.c on arch/hexagon/ produces a
printk format build warning.  This is due to hexagon's ffs() being
coded as returning long instead of int.

Fix the printk format warning by changing all of hexagon's ffs() and
fls() functions to return int instead of long.  The variables that
they return are already int instead of long.  This return type
matches the return type in .

../drivers/mtd/nand/raw/nandsim.c: In function 'init_nandsim':
../drivers/mtd/nand/raw/nandsim.c:760:2: warning: format '%u' expects argument of type 'unsigned int', but argument 2 has type 'long int' [-Wformat]

There are no ffs() or fls() allmodconfig build errors after making this
change.

Signed-off-by: Randy Dunlap 
Cc: Richard Kuo 
Cc: linux-hexagon@vger.kernel.org
Cc: Geert Uytterhoeven 
Patch-mainline: linux-kernel @ 07/22/2018, 16:03
Signed-off-by: Richard Kuo 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

futex: Remove duplicated code and fix undefined behaviour

2018-05-26T06:48:50+00:00

commit 30d6e0a4190d37740e9447e4e4815f06992dd8c3 upstream.

There is code duplicated over all architecture's headers for
futex_atomic_op_inuser. Namely op decoding, access_ok check for uaddr,
and comparison of the result.

Remove this duplication and leave up to the arches only the needed
assembly which is now in arch_futex_atomic_op_inuser.

This effectively distributes the Will Deacon's arm64 fix for undefined
behaviour reported by UBSAN to all architectures. The fix was done in
commit 5f16a046f8e1 (arm64: futex: Fix undefined behaviour with
FUTEX_OP_OPARG_SHIFT usage). Look there for an example dump.

And as suggested by Thomas, check for negative oparg too, because it was
also reported to cause undefined behaviour report.

Note that s390 removed access_ok check in d12a29703 ("s390/uaccess:
remove pointless access_ok() checks") as access_ok there returns true.
We introduce it back to the helper for the sake of simplicity (it gets
optimized away anyway).

Signed-off-by: Jiri Slaby 
Signed-off-by: Thomas Gleixner 
Acked-by: Russell King 
Acked-by: Michael Ellerman  (powerpc)
Acked-by: Heiko Carstens  [s390]
Acked-by: Chris Metcalf  [for tile]
Reviewed-by: Darren Hart (VMware) 
Reviewed-by: Will Deacon  [core/arm64]
Cc: linux-mips@linux-mips.org
Cc: Rich Felker 
Cc: linux-ia64@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: peterz@infradead.org
Cc: Benjamin Herrenschmidt 
Cc: Max Filippov 
Cc: Paul Mackerras 
Cc: sparclinux@vger.kernel.org
Cc: Jonas Bonn 
Cc: linux-s390@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: Yoshinori Sato 
Cc: linux-hexagon@vger.kernel.org
Cc: Helge Deller 
Cc: "James E.J. Bottomley" 
Cc: Catalin Marinas 
Cc: Matt Turner 
Cc: linux-snps-arc@lists.infradead.org
Cc: Fenghua Yu 
Cc: Arnd Bergmann 
Cc: linux-xtensa@linux-xtensa.org
Cc: Stefan Kristiansson 
Cc: openrisc@lists.librecores.org
Cc: Ivan Kokshaysky 
Cc: Stafford Horne 
Cc: linux-arm-kernel@lists.infradead.org
Cc: Richard Henderson 
Cc: Chris Zankel 
Cc: Michal Simek 
Cc: Tony Luck 
Cc: linux-parisc@vger.kernel.org
Cc: Vineet Gupta 
Cc: Ralf Baechle 
Cc: Richard Kuo 
Cc: linux-alpha@vger.kernel.org
Cc: Martin Schwidefsky 
Cc: linuxppc-dev@lists.ozlabs.org
Cc: "David S. Miller" 
Link: http://lkml.kernel.org/r/20170824073105.3901-1-jslaby@suse.cz
Cc: Ben Hutchings 
Signed-off-by: Greg Kroah-Hartman

hexagon: fix strncpy_from_user() error return

2016-09-24T08:07:44+00:00

commit f35c1e0671728d1c9abc405d05ef548b5fcb2fc4 upstream.

It's -EFAULT, not -1 (and contrary to the comment in there,
__strnlen_user() can return 0 - on faults).

Acked-by: Richard Kuo 
Signed-off-by: Al Viro 
Signed-off-by: Greg Kroah-Hartman

Merge tag 'v4.3-rc4' into locking/core, to pick up fixes before applying new changes

2015-10-06T15:10:28+00:00

Signed-off-by: Ingo Molnar

Merge branch 'strscpy' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile

2015-10-04T15:31:13+00:00

Pull strscpy string copy function implementation from Chris Metcalf.

Chris sent this during the merge window, but I waffled back and forth on
the pull request, which is why it's going in only now.

The new "strscpy()" function is definitely easier to use and more secure
than either strncpy() or strlcpy(), both of which are horrible nasty
interfaces that have serious and irredeemable problems.

strncpy() has a useless return value, and doesn't NUL-terminate an
overlong result.  To make matters worse, it pads a short result with
zeroes, which is a performance disaster if you have big buffers.

strlcpy(), by contrast, is a mis-designed "fix" for strlcpy(), lacking
the insane NUL padding, but having a differently broken return value
which returns the original length of the source string.  Which means
that it will read characters past the count from the source buffer, and
you have to trust the source to be properly terminated.  It also makes
error handling fragile, since the test for overflow is unnecessarily
subtle.

strscpy() avoids both these problems, guaranteeing the NUL termination
(but not excessive padding) if the destination size wasn't zero, and
making the overflow condition very obvious by returning -E2BIG.  It also
doesn't read past the size of the source, and can thus be used for
untrusted source data too.

So why did I waffle about this for so long?

Every time we introduce a new-and-improved interface, people start doing
these interminable series of trivial conversion patches.

And every time that happens, somebody does some silly mistake, and the
conversion patch to the improved interface actually makes things worse.
Because the patch is mindnumbing and trivial, nobody has the attention
span to look at it carefully, and it's usually done over large swatches
of source code which means that not every conversion gets tested.

So I'm pulling the strscpy() support because it *is* a better interface.
But I will refuse to pull mindless conversion patches.  Use this in
places where it makes sense, but don't do trivial patches to fix things
that aren't actually known to be broken.

* 'strscpy' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  tile: use global strscpy() rather than private copy
  string: provide strscpy()
  Make asm/word-at-a-time.h available on all architectures

atomic, arch: Audit atomic_{read,set}()

2015-09-23T07:54:28+00:00

This patch makes sure that atomic_{read,set}() are at least
{READ,WRITE}_ONCE().

We already had the 'requirement' that atomic_read() should use
ACCESS_ONCE(), and most archs had this, but a few were lacking.
All are now converted to use READ_ONCE().

And, by a symmetry and general paranoia argument, upgrade atomic_set()
to use WRITE_ONCE().

Signed-off-by: Peter Zijlstra (Intel) 
Cc: Andrew Morton 
Cc: Dmitry Vyukov 
Cc: Linus Torvalds 
Cc: Paul E. McKenney 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: james.hogan@imgtec.com
Cc: linux-kernel@vger.kernel.org
Cc: oleg@redhat.com
Cc: will.deacon@arm.com
Signed-off-by: Ingo Molnar

dma-mapping: consolidate dma_set_mask

2015-09-10T20:29:01+00:00

Almost everyone implements dma_set_mask the same way, although some time
that's hidden in ->set_dma_mask methods.

This patch consolidates those into a common implementation that either
calls ->set_dma_mask if present or otherwise uses the default
implementation.  Some architectures used to only call ->set_dma_mask
after the initial checks, and those instance have been fixed to do the
full work.  h8300 implemented dma_set_mask bogusly as a no-ops and has
been fixed.

Unfortunately some architectures overload unrelated semantics like changing
the dma_ops into it so we still need to allow for an architecture override
for now.

[jcmvbkbc@gmail.com: fix xtensa]
Signed-off-by: Christoph Hellwig 
Cc: Arnd Bergmann 
Cc: Russell King 
Cc: Catalin Marinas 
Cc: Will Deacon 
Cc: Yoshinori Sato 
Cc: Michal Simek 
Cc: Jonas Bonn 
Cc: Chris Metcalf 
Cc: Guan Xuetao 
Cc: Ralf Baechle 
Cc: Benjamin Herrenschmidt 
Cc: Ingo Molnar 
Cc: Thomas Gleixner 
Cc: "H. Peter Anvin" 
Cc: Andy Shevchenko 
Signed-off-by: Max Filippov 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

dma-mapping: consolidate dma_supported

2015-09-10T20:29:01+00:00

Most architectures just call into ->dma_supported, but some also return 1
if the method is not present, or 0 if no dma ops are present (although
that should never happeb). Consolidate this more broad version into
common code.

Also fix h8300 which inorrectly always returned 0, which would have been
a problem if it's dma_set_mask implementation wasn't a similarly buggy
noop.

As a few architectures have much more elaborate implementations, we
still allow for arch overrides.

[jcmvbkbc@gmail.com: fix xtensa]
Signed-off-by: Christoph Hellwig 
Cc: Arnd Bergmann 
Cc: Russell King 
Cc: Catalin Marinas 
Cc: Will Deacon 
Cc: Yoshinori Sato 
Cc: Michal Simek 
Cc: Jonas Bonn 
Cc: Chris Metcalf 
Cc: Guan Xuetao 
Cc: Ralf Baechle 
Cc: Benjamin Herrenschmidt 
Cc: Ingo Molnar 
Cc: Thomas Gleixner 
Cc: "H. Peter Anvin" 
Cc: Andy Shevchenko 
Signed-off-by: Max Filippov 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

dma-mapping: cosolidate dma_mapping_error

2015-09-10T20:29:01+00:00

Currently there are three valid implementations of dma_mapping_error:

 (1) call ->mapping_error
 (2) check for a hardcoded error code
 (3) always return 0

This patch provides a common implementation that calls ->mapping_error
if present, then checks for DMA_ERROR_CODE if defined or otherwise
returns 0.

[jcmvbkbc@gmail.com: fix xtensa]
Signed-off-by: Christoph Hellwig 
Cc: Arnd Bergmann 
Cc: Russell King 
Cc: Catalin Marinas 
Cc: Will Deacon 
Cc: Yoshinori Sato 
Cc: Michal Simek 
Cc: Jonas Bonn 
Cc: Chris Metcalf 
Cc: Guan Xuetao 
Cc: Ralf Baechle 
Cc: Benjamin Herrenschmidt 
Cc: Ingo Molnar 
Cc: Thomas Gleixner 
Cc: "H. Peter Anvin" 
Cc: Andy Shevchenko 
Signed-off-by: Max Filippov 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

dma-mapping: consolidate dma_{alloc,free}_noncoherent

2015-09-10T20:29:01+00:00

Most architectures do not support non-coherent allocations and either
define dma_{alloc,free}_noncoherent to their coherent versions or stub
them out.

Openrisc uses dma_{alloc,free}_attrs to implement them, and only Mips
implements them directly.

This patch moves the Openrisc version to common code, and handles the
DMA_ATTR_NON_CONSISTENT case in the mips dma_map_ops instance.

Note that actual non-coherent allocations require a dma_cache_sync
implementation, so if non-coherent allocations didn't work on
an architecture before this patch they still won't work after it.

[jcmvbkbc@gmail.com: fix xtensa]
Signed-off-by: Christoph Hellwig 
Cc: Arnd Bergmann 
Cc: Russell King 
Cc: Catalin Marinas 
Cc: Will Deacon 
Cc: Yoshinori Sato 
Cc: Michal Simek 
Cc: Jonas Bonn 
Cc: Chris Metcalf 
Cc: Guan Xuetao 
Cc: Ralf Baechle 
Cc: Benjamin Herrenschmidt 
Cc: Ingo Molnar 
Cc: Thomas Gleixner 
Cc: "H. Peter Anvin" 
Cc: Andy Shevchenko 
Signed-off-by: Max Filippov 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds