linux-stable.git/arch/blackfin/kernel/process.c, branch linux-3.3.y

nohz: Remove tick_nohz_idle_enter_norcu() / tick_nohz_idle_exit_norcu()

2011-12-11T18:31:57+00:00

Those two APIs were provided to optimize the calls of
tick_nohz_idle_enter() and rcu_idle_enter() into a single
irq disabled section. This way no interrupt happening in-between would
needlessly process any RCU job.

Now we are talking about an optimization for which benefits
have yet to be measured. Let's start simple and completely decouple
idle rcu and dyntick idle logics to simplify.

Signed-off-by: Frederic Weisbecker 
Cc: Ingo Molnar 
Cc: Thomas Gleixner 
Cc: Peter Zijlstra 
Reviewed-by: Josh Triplett 
Signed-off-by: Paul E. McKenney

nohz: Allow rcu extended quiescent state handling seperately from tick stop

2011-12-11T18:31:36+00:00

It is assumed that rcu won't be used once we switch to tickless
mode and until we restart the tick. However this is not always
true, as in x86-64 where we dereference the idle notifiers after
the tick is stopped.

To prepare for fixing this, add two new APIs:
tick_nohz_idle_enter_norcu() and tick_nohz_idle_exit_norcu().

If no use of RCU is made in the idle loop between
tick_nohz_enter_idle() and tick_nohz_exit_idle() calls, the arch
must instead call the new *_norcu() version such that the arch doesn't
need to call rcu_idle_enter() and rcu_idle_exit().

Otherwise the arch must call tick_nohz_enter_idle() and
tick_nohz_exit_idle() and also call explicitly:

- rcu_idle_enter() after its last use of RCU before the CPU is put
to sleep.
- rcu_idle_exit() before the first use of RCU after the CPU is woken
up.

Signed-off-by: Frederic Weisbecker 
Cc: Mike Frysinger 
Cc: Guan Xuetao 
Cc: David Miller 
Cc: Chris Metcalf 
Cc: Hans-Christian Egtvedt 
Cc: Ralf Baechle 
Cc: Paul E. McKenney 
Cc: Ingo Molnar 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: H. Peter Anvin 
Cc: Russell King 
Cc: Paul Mackerras 
Cc: Heiko Carstens 
Cc: Paul Mundt 
Signed-off-by: Paul E. McKenney

nohz: Separate out irq exit and idle loop dyntick logic

2011-12-11T18:31:35+00:00

The tick_nohz_stop_sched_tick() function, which tries to delay
the next timer tick as long as possible, can be called from two
places:

- From the idle loop to start the dytick idle mode
- From interrupt exit if we have interrupted the dyntick
idle mode, so that we reprogram the next tick event in
case the irq changed some internal state that requires this
action.

There are only few minor differences between both that
are handled by that function, driven by the ts->inidle
cpu variable and the inidle parameter. The whole guarantees
that we only update the dyntick mode on irq exit if we actually
interrupted the dyntick idle mode, and that we enter in RCU extended
quiescent state from idle loop entry only.

Split this function into:

- tick_nohz_idle_enter(), which sets ts->inidle to 1, enters
dynticks idle mode unconditionally if it can, and enters into RCU
extended quiescent state.

- tick_nohz_irq_exit() which only updates the dynticks idle mode
when ts->inidle is set (ie: if tick_nohz_idle_enter() has been called).

To maintain symmetry, tick_nohz_restart_sched_tick() has been renamed
into tick_nohz_idle_exit().

This simplifies the code and micro-optimize the irq exit path (no need
for local_irq_save there). This also prepares for the split between
dynticks and rcu extended quiescent state logics. We'll need this split to
further fix illegal uses of RCU in extended quiescent states in the idle
loop.

Signed-off-by: Frederic Weisbecker 
Cc: Mike Frysinger 
Cc: Guan Xuetao 
Cc: David Miller 
Cc: Chris Metcalf 
Cc: Hans-Christian Egtvedt 
Cc: Ralf Baechle 
Cc: Paul E. McKenney 
Cc: Ingo Molnar 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: H. Peter Anvin 
Cc: Russell King 
Cc: Paul Mackerras 
Cc: Heiko Carstens 
Cc: Paul Mundt 
Signed-off-by: Paul E. McKenney 
Reviewed-by: Josh Triplett

Blackfin: exec: remove redundant set_fs(USER_DS)

2011-07-23T05:18:18+00:00

The address limit is already set in flush_old_exec() so this
set_fs(USER_DS) is redundant.

Signed-off-by: Mathias Krause 
Signed-off-by: Mike Frysinger

Blackfin: don't touch task->cpus_allowed directly

2011-05-25T12:24:10+00:00

Every callter (except kthread_bind) should use proper
set_cpus_allowed_ptr() APIs.

Signed-off-by: KOSAKI Motohiro 
Signed-off-by: Mike Frysinger

BKL: remove extraneous #include

2010-11-17T16:59:32+00:00

The big kernel lock has been removed from all these files at some point,
leaving only the #include.

Remove this too as a cleanup.

Signed-off-by: Arnd Bergmann 
Signed-off-by: Linus Torvalds

Blackfin: access_ok: permit L1 stack

2010-10-22T07:48:54+00:00

When apps run with their stack in L1, some system calls might be made
where a buffer is in the stack as an argument.  So make sure the core
Blackfin access code does not reject this memory location.

Signed-off-by: Barry Song 
Signed-off-by: Mike Frysinger

Blackfin: Rename IRQ flags handling functions

2010-10-07T13:08:52+00:00

Rename h/w IRQ flags handling functions to be in line with what is expected for
the irq renaming patch.  This renames local_*_hw() to hard_local_*() using the
following perl command:

	perl -pi -e 's/local_irq_(restore|enable|disable)_hw/hard_local_irq_\1/ or s/local_irq_save_hw([_a-z]*)[(]flags[)]/flags = hard_local_irq_save\1()/' `find arch/blackfin/ -name "*.[ch]"`

and then fixing up asm/irqflags.h manually.

Additionally, arch/hard_local_save_flags() and arch/hard_local_irq_save() both
return the flags rather than passing it through the argument list.

Signed-off-by: David Howells

Make do_execve() take a const filename pointer

2010-08-18T01:07:43+00:00

Make do_execve() take a const filename pointer so that kernel_execve() compiles
correctly on ARM:

arch/arm/kernel/sys_arm.c:88: warning: passing argument 1 of 'do_execve' discards qualifiers from pointer target type

This also requires the argv and envp arguments to be consted twice, once for
the pointer array and once for the strings the array points to.  This is
because do_execve() passes a pointer to the filename (now const) to
copy_strings_kernel().  A simpler alternative would be to cast the filename
pointer in do_execve() when it's passed to copy_strings_kernel().

do_execve() may not change any of the strings it is passed as part of the argv
or envp lists as they are some of them in .rodata, so marking these strings as
const should be fine.

Further kernel_execve() and sys_execve() need to be changed to match.

This has been test built on x86_64, frv, arm and mips.

Signed-off-by: David Howells 
Tested-by: Ralf Baechle 
Acked-by: Russell King 
Signed-off-by: Linus Torvalds

Mark arguments to certain syscalls as being const

2010-08-13T23:53:13+00:00

Mark arguments to certain system calls as being const where they should be but
aren't.  The list includes:

 (*) The filename arguments of various stat syscalls, execve(), various utimes
     syscalls and some mount syscalls.

 (*) The filename arguments of some syscall helpers relating to the above.

 (*) The buffer argument of various write syscalls.

Signed-off-by: David Howells 
Acked-by: David S. Miller 
Signed-off-by: Linus Torvalds