linux-stable.git/arch/avr32/kernel/process.c, branch linux-3.3.y

nohz: Remove tick_nohz_idle_enter_norcu() / tick_nohz_idle_exit_norcu()

2011-12-11T18:31:57+00:00

Those two APIs were provided to optimize the calls of
tick_nohz_idle_enter() and rcu_idle_enter() into a single
irq disabled section. This way no interrupt happening in-between would
needlessly process any RCU job.

Now we are talking about an optimization for which benefits
have yet to be measured. Let's start simple and completely decouple
idle rcu and dyntick idle logics to simplify.

Signed-off-by: Frederic Weisbecker 
Cc: Ingo Molnar 
Cc: Thomas Gleixner 
Cc: Peter Zijlstra 
Reviewed-by: Josh Triplett 
Signed-off-by: Paul E. McKenney

nohz: Allow rcu extended quiescent state handling seperately from tick stop

2011-12-11T18:31:36+00:00

It is assumed that rcu won't be used once we switch to tickless
mode and until we restart the tick. However this is not always
true, as in x86-64 where we dereference the idle notifiers after
the tick is stopped.

To prepare for fixing this, add two new APIs:
tick_nohz_idle_enter_norcu() and tick_nohz_idle_exit_norcu().

If no use of RCU is made in the idle loop between
tick_nohz_enter_idle() and tick_nohz_exit_idle() calls, the arch
must instead call the new *_norcu() version such that the arch doesn't
need to call rcu_idle_enter() and rcu_idle_exit().

Otherwise the arch must call tick_nohz_enter_idle() and
tick_nohz_exit_idle() and also call explicitly:

- rcu_idle_enter() after its last use of RCU before the CPU is put
to sleep.
- rcu_idle_exit() before the first use of RCU after the CPU is woken
up.

Signed-off-by: Frederic Weisbecker 
Cc: Mike Frysinger 
Cc: Guan Xuetao 
Cc: David Miller 
Cc: Chris Metcalf 
Cc: Hans-Christian Egtvedt 
Cc: Ralf Baechle 
Cc: Paul E. McKenney 
Cc: Ingo Molnar 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: H. Peter Anvin 
Cc: Russell King 
Cc: Paul Mackerras 
Cc: Heiko Carstens 
Cc: Paul Mundt 
Signed-off-by: Paul E. McKenney

nohz: Separate out irq exit and idle loop dyntick logic

2011-12-11T18:31:35+00:00

The tick_nohz_stop_sched_tick() function, which tries to delay
the next timer tick as long as possible, can be called from two
places:

- From the idle loop to start the dytick idle mode
- From interrupt exit if we have interrupted the dyntick
idle mode, so that we reprogram the next tick event in
case the irq changed some internal state that requires this
action.

There are only few minor differences between both that
are handled by that function, driven by the ts->inidle
cpu variable and the inidle parameter. The whole guarantees
that we only update the dyntick mode on irq exit if we actually
interrupted the dyntick idle mode, and that we enter in RCU extended
quiescent state from idle loop entry only.

Split this function into:

- tick_nohz_idle_enter(), which sets ts->inidle to 1, enters
dynticks idle mode unconditionally if it can, and enters into RCU
extended quiescent state.

- tick_nohz_irq_exit() which only updates the dynticks idle mode
when ts->inidle is set (ie: if tick_nohz_idle_enter() has been called).

To maintain symmetry, tick_nohz_restart_sched_tick() has been renamed
into tick_nohz_idle_exit().

This simplifies the code and micro-optimize the irq exit path (no need
for local_irq_save there). This also prepares for the split between
dynticks and rcu extended quiescent state logics. We'll need this split to
further fix illegal uses of RCU in extended quiescent states in the idle
loop.

Signed-off-by: Frederic Weisbecker 
Cc: Mike Frysinger 
Cc: Guan Xuetao 
Cc: David Miller 
Cc: Chris Metcalf 
Cc: Hans-Christian Egtvedt 
Cc: Ralf Baechle 
Cc: Paul E. McKenney 
Cc: Ingo Molnar 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: H. Peter Anvin 
Cc: Russell King 
Cc: Paul Mackerras 
Cc: Heiko Carstens 
Cc: Paul Mundt 
Signed-off-by: Paul E. McKenney 
Reviewed-by: Josh Triplett

avr32: make architecture sys_clone prototype match asm-generic prototype

2011-01-13T19:41:06+00:00

This patch will fix the arguments to the architecture sys_clone() function to
match the asm-generic/syscalls.h prototype. In the same go remove the
architecture specific prototype for the same function.

The sys_clone() function is only called from assembly, hence the argument types
were not having any affect.

Signed-off-by: Hans-Christian Egtvedt

Make do_execve() take a const filename pointer

2010-08-18T01:07:43+00:00

Make do_execve() take a const filename pointer so that kernel_execve() compiles
correctly on ARM:

arch/arm/kernel/sys_arm.c:88: warning: passing argument 1 of 'do_execve' discards qualifiers from pointer target type

This also requires the argv and envp arguments to be consted twice, once for
the pointer array and once for the strings the array points to.  This is
because do_execve() passes a pointer to the filename (now const) to
copy_strings_kernel().  A simpler alternative would be to cast the filename
pointer in do_execve() when it's passed to copy_strings_kernel().

do_execve() may not change any of the strings it is passed as part of the argv
or envp lists as they are some of them in .rodata, so marking these strings as
const should be fine.

Further kernel_execve() and sys_execve() need to be changed to match.

This has been test built on x86_64, frv, arm and mips.

Signed-off-by: David Howells 
Tested-by: Ralf Baechle 
Acked-by: Russell King 
Signed-off-by: Linus Torvalds

Mark arguments to certain syscalls as being const

2010-08-13T23:53:13+00:00

Mark arguments to certain system calls as being const where they should be but
aren't.  The list includes:

 (*) The filename arguments of various stat syscalls, execve(), various utimes
     syscalls and some mount syscalls.

 (*) The filename arguments of some syscall helpers relating to the above.

 (*) The buffer argument of various write syscalls.

Signed-off-by: David Howells 
Acked-by: David S. Miller 
Signed-off-by: Linus Torvalds

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

2010-03-30T13:02:32+00:00

percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo 
Guess-its-ok-by: Christoph Lameter 
Cc: Ingo Molnar 
Cc: Lee Schermerhorn

ptrace: remove PT_DTRACE from avr32, mn10300, parisc, s390, sh, xtensa

2009-06-18T20:03:48+00:00

avr32, mn10300, parisc, s390, sh, xtensa:

They never set PT_DTRACE, but clear it after do_execve().

Signed-off-by: Oleg Nesterov 
Cc: David Howells 
Acked-by: Kyle McMartin 
Cc: Grant Grundler 
Cc: Matthew Wilcox 
Acked-by: Martin Schwidefsky 
Cc: Heiko Carstens 
Acked-by: Paul Mundt 
Acked-by: Chris Zankel 
Acked-by: Roland McGrath 
Acked-by: Haavard Skinnemoen 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Simplify copy_thread()

2009-04-03T02:04:51+00:00

First argument unused since 2.3.11.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Alexey Dobriyan 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

avr32: Introducing asm/syscalls.h

2008-12-17T12:32:38+00:00

Declaring arch-dependent syscalls for avr32 architecture

Signed-off-by: Jaswinder Singh 
Signed-off-by: Haavard Skinnemoen