Lower sd card speeds for two boards to make them run more reliable,
missing 32k clock definition for Anbric xx3 devices, missing cache-levels
for rk3588, fixed rk3326-board display supplies and more dt-schema fixes.

* tag 'v6.3-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: correct panel supplies on some rk3326 boards
  arm64: dts: rockchip: use just "port" in panel on RockPro64
  arm64: dts: rockchip: use just "port" in panel on Pinebook Pro
  arm64: dts: rockchip: Remove non-existing pwm-delay-us property
  arm64: dts: rockchip: Add clk_rtc_32k to Anbernic xx3 Devices
  arm64: dts: rockchip: add rk3588 cache level information
  arm64: dts: rockchip: Lower SD card speed on rk3399 Pinebook Pro
  arm64: dts: rockchip: Lower sd speed on rk3566-soquartz
  ARM: dts: rockchip: fix a typo error for rk3288 spdif node
  arm64: dts: rockchip: Fix rk3399 GICv3 ITS node name

Link: https://lore.kernel.org/r/10559306.CDJkKcVGEf@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

i.MX fixes for 6.3, 2nd round:

- Fix 'reg' address length for i.MX8MP LCDIF2 device.
- A couple of changes from Fabio Estevam to fix DTC warnings caused
  unnecessary address/size cells.
- Re-enable PCI driver support in imx_v6_v7_defconfig.
- Fix PMIC clock source property for imx8mm-evk board.
- A couple of fixes from Peng Fan to correct off-on delay property for
  i.MX8 Verdin boards.

* tag 'imx-fixes-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: imx_v6_v7_defconfig: Fix unintentional disablement of PCI
  ARM: dts: imx6ull-colibri: Remove unnecessary #address-cells/#size-cells
  ARM: dts: imx7d-remarkable2: Remove unnecessary #address-cells/#size-cells
  arm64: dts: imx8mp-verdin: correct off-on-delay
  arm64: dts: imx8mm-verdin: correct off-on-delay
  arm64: dts: imx8mm-evk: correct pmic clock source
  arm64: dts: imx8mp: fix address length for LCDIF2

Link: https://lore.kernel.org/r/20230406021602.GP11367@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Since commit 75c2f26da03f ("PCI: imx6: Add i.MX PCIe EP mode support")
the i.MX6 PCI driver is no longer selected by default. The
existing PCI_IMX6 was made a hidden option, selected by new options
PCI_IMX6_HOST (for the existing support) and PCI_IMX6_EP (for the
endpoint mode), but there has been no corresponding update to
imx_v6_v7_defconfig so the PCI_IMX6 ends up getting disabled.
Switch imx_v6_v7_defconfig to PCI_IMX6_HOST to preserve the existing
functionality.

This is based on the same fix done in commit 0cd5780eb625 ("arm64:
defconfig: Fix unintentional disablement of PCI on i.MX").

Fixes: 75c2f26da03f ("PCI: imx6: Add i.MX PCIe EP mode support")
Reported-by: Mattias Barthel <mattiasbarthel@gmail.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Building with W=1 leads to the following dtc warning:

arch/arm/boot/dts/imx6ull-colibri.dtsi:36.9-46.5: Warning (graph_child_address): /connector/ports: graph node has single child node 'port@0', #address-cells/#size-cells are not necessary

Since a single port is used, 'ports' can be removed, as well as the
unnecessary #address-cells/#size-cells.

Fixes: bd5880e10982 ("ARM: dts: colibri-imx6ull: Enable dual-role switching")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Building with W=1 leads to the following dtc warning:

arch/arm/boot/dts/imx7d-remarkable2.dts:319.19-335.4: Warning (avoid_unnecessary_addr_size): /soc/bus@30800000/i2c@30a50000/pmic@62: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property

Remove unnecessary #address-cells/#size-cells to fix it.

Fixes: 9076cbaa7757 ("ARM: dts: imx7d-remarkable2: Enable silergy,sy7636a")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Alistair Francis <alistair@alistair23.me>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Pull ARM SoC fixes from Arnd Bergmann:
 "As usual, most of the bug fixes address issues in the devicetree
  files, and out of these, most are for the Qualcomm and NXP platforms,
  including:

   - A missing 'reserved-memory' property on LG G Watch R that is needed
     to prevent clashing with firmware

   - Annotations for cache coherency on multiple machines

   - Corrections for pinctrl, regulator, clock, iommu and power domain
     properties for i.MX and Qualcomm to correctly reflect the hardware
     settings

   - Firmware file names on multiple machines SA8540P Ride board

   - An incompatible change to the qcom vadc driver requires adding
     individual labels

   - Fix EQoS PHY reset GPIO by dropping the deprecated/wrong property
     and switch to the new bindings.

   - A fix for PCI bus address translation Tegra194 and Tegra234.

  There are also a couple of device driver fixes, addressing:

   - A race condition in the amdtee driver

   - A performance regression in the Qualcomm 'llcc' driver

   - An unitialized variable use NXP i.MX 'weim' driver

   - Error handling issues in Qualcomm 'rmtfs', and 'scm' drivers and
     the Arm scmi firmware driver"

* tag 'arm-fixes-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits)
  arm64: dts: qcom: sc8280xp-x13s: mark bob regulator as always-on
  arm64: dts: qcom: sc8280xp-x13s: mark s12b regulator as always-on
  arm64: dts: qcom: sc8280xp-x13s: mark s10b regulator as always-on
  arm64: dts: qcom: sc8280xp-x13s: mark s11b regulator as always-on
  arm64: dts: imx93: add missing #address-cells and #size-cells to i2c nodes
  bus: imx-weim: fix branch condition evaluates to a garbage value
  arm64: dts: imx8mn: specify #sound-dai-cells for SAI nodes
  ARM: dts: imx6sl: tolino-shine2hd: fix usbotg1 pinctrl
  ARM: dts: imx6sll: e60k02: fix usbotg1 pinctrl
  ARM: dts: imx6sll: e70k02: fix usbotg1 pinctrl
  arm64: dts: imx93: Fix eqos properties
  arm64: dts: imx8mp: Fix LCDIF2 node clock order
  arm64: dts: imx8mm-nitrogen-r2: fix WM8960 clock name
  arm64: dts: imx8dxl-evk: Fix eqos phy reset gpio
  firmware: qcom: scm: fix bogus irq error at probe
  arm64: dts: qcom: sm8550: Mark UFS controller as cache coherent
  arm64: dts: qcom: sa8540p-ride: correct name of remoteproc_nsp0 firmware
  arm64: dts: qcom: sm8450: Mark UFS controller as cache coherent
  arm64: dts: qcom: sm8350: Mark UFS controller as cache coherent
  arm64: dts: qcom: sm8550: fix LPASS pinctrl slew base address
  ...

Qualcomm ARM32 Devicetree fixes for v6.3

This introduces missing reserved-memory ranges on LG G Watch R,
resolving stability issues caused by Linux reusing memory used by
firmware.

* tag 'qcom-dts-fixes-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  ARM: dts: qcom: apq8026-lg-lenok: add missing reserved memory

Link: https://lore.kernel.org/r/20230323141922.1085875-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Pull ARM fix from Russell King:
 "Just one fix for now to eliminate a KASAN false positive"

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 9290/1: uaccess: Fix KASAN false-positives

usb@2184000: 'pinctrl-0' is a dependency of 'pinctrl-names'

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Fixes: 9c7016f1ca6d ("ARM: dts: imx: add devicetree for Tolino Shine 2 HD")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

usb@2184000: 'pinctrl-0' is a dependency of 'pinctrl-names'

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Fixes: c100ea86e6ab ("ARM: dts: add Netronix E60K02 board common file")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>