i.MX fixes for 6.18, 2nd round:

- Correct i.MX8DXL's pcie-ep interrupt number (Frank Li)
- Swap interrupt numbers of eqos for imx8dxl-ss-conn (Frank Li)
- Correct SAI3 interrupt line for i.MX6UL (Maarten Zanders)
- Correct mux-controller select/enable-gpios polarity for imx8qm-mek
  board (Xu Yang)

* tag 'imx-fixes-6.18-2' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  arm64: dts: imx8qm-mek: fix mux-controller select/enable-gpios polarity
  ARM: dts: nxp: imx6ul: correct SAI3 interrupt line
  arm64: dts: imx8dxl-ss-conn: swap interrupts number of eqos
  arm64: dts: imx8dxl: Correct pcie-ep interrupt number

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This pull request contains Broadcom ARM-based SoCs Device Tree files updates
for 6.18, please pull the following:

- Rafal fixes the Ethernet PHY address on the Luxul XAP-1440

* tag 'arm-soc/for-6.18/devicetree-fixes-part2' of https://github.com/Broadcom/stblinux:
  ARM: dts: BCM53573: Fix address of Luxul XAP-1440's Ethernet PHY

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

i.MX fixes for 6.18:

- Enable ext4 support explicitly in imx_v6_v7_defconfig to fix a regression
  caused by commit d6ace46c82fd ("ext4: remove obsolete EXT3 config options")
- Correct report-rate-hz setting for imx6ull-engicam-microgea-rmm board
- Fix MSI mapping for i.MX95 PCIe endpoint device nodes
- Fix USB OTG role switching for imx8mp-kontron board
- Fix a dt-schema warning caused by audmux node for imx51-zii-rdu1 board
- Avoid gpio0_mipi_csi GPIOs being deferred for i.MX8 img subsystem

* tag 'imx-fixes-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  arm64: dts: imx8mp-kontron: Fix USB OTG role switching
  arm64: dts: imx95: Fix MSI mapping for PCIe endpoint nodes
  arm64: dts: imx8-ss-img: Avoid gpio0_mipi_csi GPIOs being deferred
  arm: imx_v6_v7_defconfig: enable ext4 directly
  ARM: dts: imx51-zii-rdu1: Fix audmux node names
  ARM: dts: imx6ull-engicam-microgea-rmm: fix report-rate-hz value

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

First batch of ASPEED fixes for 6.18

This time it's just the one fix addressing a PHY configuration regression in the
Fuji (Meta) platform's mac3 devicetree node.

* tag 'aspeed-6.18-fixes-0' of https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux:
  ARM: dts: aspeed: fuji-data64: Enable mac3 controller

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The i.MX6UL reference manual lists two possible interrupt lines for
SAI3 (56 and 57, offset +32). The current device tree entry uses
the first one (24), which prevents IRQs from being handled properly.

Use the second interrupt line (25), which does allow interrupts
to work as expected.

Fixes: 36e2edf6ac07 ("ARM: dts: imx6ul: add sai support")
Signed-off-by: Maarten Zanders <maarten@zanders.be>
Cc: stable@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Pull hardening fixes from Kees Cook:
 "This is a work-around for a (now fixed) corner case in the arm32 build
  with Clang KCFI enabled.

   - Introduce __nocfi_generic for arm32 Clang (Nathan Chancellor)"

* tag 'hardening-v6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  libeth: xdp: Disable generic kCFI pass for libeth_xdp_tx_xmit_bulk()
  ARM: Select ARCH_USES_CFI_GENERIC_LLVM_PASS
  compiler_types: Introduce __nocfi_generic

Luxul XAP-1440 has BCM54210E PHY at address 25.

Fixes: 44ad82078069 ("ARM: dts: BCM53573: Fix Ethernet info for Luxul devices")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20251002194852.13929-1-zajec5@gmail.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>

Prior to clang 22.0.0 [1], ARM did not have an architecture specific
kCFI bundle lowering in the backend, which may cause issues. Select
CONFIG_ARCH_USES_CFI_GENERIC_LLVM_PASS to enable use of __nocfi_generic.

Link: https://github.com/llvm/llvm-project/commit/d130f402642fba3d065aacb506cb061c899558de [1]
Link: https://github.com/ClangBuiltLinux/linux/issues/2124
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20251025-idpf-fix-arm-kcfi-build-error-v1-2-ec57221153ae@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>

In former times, ext4 was enabled implicitely by enabling ext3 but with
the ext3 fs gone, it does not get enabled, which lets devices fail to
mount root on non-initrd based boots with an ext4 root.

Fixes: d6ace46c82fd ("ext4: remove obsolete EXT3 config options")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Pull SoC fixes from Arnd Bergmann:
 "The main change this time is an update to the MAINTAINERS file,
  listing Krzysztof Kozlowski, Alexandre Belloni, and Linus Walleij as
  additional maintainers for the SoC tree, in order to go back to a
  group maintainership. Drew Fustini joins as an additional reviewer for
  the SoC tree.

  Thanks to all of you for volunteering to help out.

  On the actual bugfixes, we have a few correctness changes for firmware
  drivers (qtee, arm-ffa, scmi) and two devicetree fixes for Raspberry
  Pi"

* tag 'soc-fixes-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  soc: officially expand maintainership team
  firmware: arm_scmi: Fix premature SCMI_XFER_FLAG_IS_RAW clearing in raw mode
  firmware: arm_scmi: Skip RAW initialization on failure
  include: trace: Fix inflight count helper on failed initialization
  firmware: arm_scmi: Account for failed debug initialization
  ARM: dts: broadcom: rpi: Switch to V3D firmware clock
  arm64: dts: broadcom: bcm2712: Define VGIC interrupt
  firmware: arm_ffa: Add support for IMPDEF value in the memory access descriptor
  tee: QCOMTEE should depend on ARCH_QCOM
  tee: qcom: return -EFAULT instead of -EINVAL if copy_from_user() fails
  tee: qcom: prevent potential off by one read