linux-stable.git/arch/arm, branch v6.1.136 Linux kernel stable tree ARM: dts: imx6qdl-apalis: Fix poweroff on Apalis iMX6 2025-04-07T08:05:46+00:00 Stefan Eichenberger stefan.eichenberger@toradex.com 2025-01-10T15:18:29+00:00 f6c086a79ded09a19ccc320c527188b9dd86ceb4 commit 83964a29379cb08929a39172780a4c2992bc7c93 upstream. The current solution for powering off the Apalis iMX6 is not functioning as intended. To resolve this, it is necessary to power off the vgen2_reg, which will also set the POWER_ENABLE_MOCI signal to a low state. This ensures the carrier board is properly informed to initiate its power-off sequence. The new solution uses the regulator-poweroff driver, which will power off the regulator during a system shutdown. Cc: <stable@vger.kernel.org> Fixes: 4eb56e26f92e ("ARM: dts: imx6q-apalis: Command pmic to standby for poweroff") Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 83964a29379cb08929a39172780a4c2992bc7c93 upstream.

The current solution for powering off the Apalis iMX6 is not functioning
as intended. To resolve this, it is necessary to power off the
vgen2_reg, which will also set the POWER_ENABLE_MOCI signal to a low
state. This ensures the carrier board is properly informed to initiate
its power-off sequence.

The new solution uses the regulator-poweroff driver, which will power
off the regulator during a system shutdown.

Cc: <stable@vger.kernel.org>
Fixes: 4eb56e26f92e ("ARM: dts: imx6q-apalis: Command pmic to standby for poweroff")
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: Remove address checking for MMUless devices 2025-04-07T08:05:45+00:00 Yanjun Yang yangyj.ee@gmail.com 2024-06-11T10:09:47+00:00 79e5030717aa2f8d4c663726660c63951c42e475 commit 3ccea4784fddd96fbd6c4497eb28b45dab638c2a upstream. Commit 169f9102f9198b ("ARM: 9350/1: fault: Implement copy_from_kernel_nofault_allowed()") added the function to check address before use. However, for devices without MMU, addr > TASK_SIZE will always fail. This patch move this function after the #ifdef CONFIG_MMU statement. Signed-off-by: Yanjun Yang <yangyj.ee@gmail.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218953 Fixes: 169f9102f9198b ("ARM: 9350/1: fault: Implement copy_from_kernel_nofault_allowed()") Link: https://lore.kernel.org/r/20240611100947.32241-1-yangyj.ee@gmail.com Signed-off-by: Kees Cook <kees@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 3ccea4784fddd96fbd6c4497eb28b45dab638c2a upstream.

Commit 169f9102f9198b ("ARM: 9350/1: fault: Implement
copy_from_kernel_nofault_allowed()") added the function to check address
before use. However, for devices without MMU, addr > TASK_SIZE will
always fail.  This patch move this function after the #ifdef CONFIG_MMU
statement.

Signed-off-by: Yanjun Yang <yangyj.ee@gmail.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218953
Fixes: 169f9102f9198b ("ARM: 9350/1: fault: Implement copy_from_kernel_nofault_allowed()")
Link: https://lore.kernel.org/r/20240611100947.32241-1-yangyj.ee@gmail.com
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: 9351/1: fault: Add "cut here" line for prefetch aborts 2025-04-07T08:05:45+00:00 Kees Cook keescook@chromium.org 2024-02-01T17:32:23+00:00 01469773db13fee1cd25151121a6d360ffaeccc4 commit 8f09b8b4fa58e99cbfd9a650b31d65cdbd8e4276 upstream. The common pattern in arm is to emit a "8<--- cut here ---" line for faults, but it was missing for do_PrefetchAbort(). Add it. Cc: Wang Kefeng <wangkefeng.wang@huawei.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: linux-arm-kernel@lists.infradead.org Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8f09b8b4fa58e99cbfd9a650b31d65cdbd8e4276 upstream.

The common pattern in arm is to emit a "8<--- cut here ---" line for
faults, but it was missing for do_PrefetchAbort(). Add it.

Cc: Wang Kefeng <wangkefeng.wang@huawei.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: 9350/1: fault: Implement copy_from_kernel_nofault_allowed() 2025-04-07T08:05:45+00:00 Kees Cook keescook@chromium.org 2024-02-01T17:32:58+00:00 756992b8d50638a7a071d4bb9841ca444cb7d4c6 commit 169f9102f9198b04afffa6164372a4ba4070f412 upstream. Under PAN emulation when dumping backtraces from things like the LKDTM EXEC_USERSPACE test[1], a double fault (which would hang a CPU) would happen because of dump_instr() attempting to read a userspace address. Make sure copy_from_kernel_nofault() does not attempt this any more. Closes: https://lava.sirena.org.uk/scheduler/job/497571 Link: https://lore.kernel.org/all/202401181125.D48DCB4C@keescook/ [1] Reported-by: Mark Brown <broonie@kernel.org> Suggested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Tested-by: Mark Brown <broonie@kernel.org> Cc: Wang Kefeng <wangkefeng.wang@huawei.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 169f9102f9198b04afffa6164372a4ba4070f412 upstream.

Under PAN emulation when dumping backtraces from things like the
LKDTM EXEC_USERSPACE test[1], a double fault (which would hang a CPU)
would happen because of dump_instr() attempting to read a userspace
address. Make sure copy_from_kernel_nofault() does not attempt this
any more.

Closes: https://lava.sirena.org.uk/scheduler/job/497571
Link: https://lore.kernel.org/all/202401181125.D48DCB4C@keescook/ [1]

Reported-by: Mark Brown <broonie@kernel.org>
Suggested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Cc: Wang Kefeng <wangkefeng.wang@huawei.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: shmobile: smp: Enforce shmobile_smp_* alignment 2025-03-28T20:59:01+00:00 Geert Uytterhoeven geert+renesas@glider.be 2025-03-10T13:12:20+00:00 1091f78287e0b1d47b38cc78fbb90ca669ec9ed2 commit 379c590113ce46f605439d4887996c60ab8820cc upstream. When the addresses of the shmobile_smp_mpidr, shmobile_smp_fn, and shmobile_smp_arg variables are not multiples of 4 bytes, secondary CPU bring-up fails: smp: Bringing up secondary CPUs ... CPU1: failed to come online CPU2: failed to come online CPU3: failed to come online smp: Brought up 1 node, 1 CPU Fix this by adding the missing alignment directive. Fixes: 4e960f52fce16a3b ("ARM: shmobile: Move shmobile_smp_{mpidr, fn, arg}[] from .text to .bss") Closes: https://lore.kernel.org/r/CAMuHMdU=QR-JLgEHKWpsr6SbaZRc-Hz9r91JfpP8c3n2G-OjqA@mail.gmail.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/c499234d559a0d95ad9472883e46077311051cd8.1741612208.git.geert+renesas@glider.be Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 379c590113ce46f605439d4887996c60ab8820cc upstream.

When the addresses of the shmobile_smp_mpidr, shmobile_smp_fn, and
shmobile_smp_arg variables are not multiples of 4 bytes, secondary CPU
bring-up fails:

    smp: Bringing up secondary CPUs ...
    CPU1: failed to come online
    CPU2: failed to come online
    CPU3: failed to come online
    smp: Brought up 1 node, 1 CPU

Fix this by adding the missing alignment directive.

Fixes: 4e960f52fce16a3b ("ARM: shmobile: Move shmobile_smp_{mpidr, fn, arg}[] from .text to .bss")
Closes: https://lore.kernel.org/r/CAMuHMdU=QR-JLgEHKWpsr6SbaZRc-Hz9r91JfpP8c3n2G-OjqA@mail.gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/c499234d559a0d95ad9472883e46077311051cd8.1741612208.git.geert+renesas@glider.be
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: dts: bcm2711: Don't mark timer regs unconfigured 2025-03-28T20:58:59+00:00 Phil Elwell phil@raspberrypi.com 2025-02-22T09:41:13+00:00 3a86ceccad311d4a0f9f09a36b967831c20be6b7 [ Upstream commit c24f272ae751a9f54f8816430e7f2d56031892cc ] During upstream process of Raspberry Pi 4 back in 2019 the ARMv7 stubs didn't configured the ARM architectural timer. This firmware issue has been fixed in 2020, which gave users enough time to update their system. So drop this property to allow the use of the vDSO version of clock_gettime. Link: https://github.com/raspberrypi/tools/pull/113 Fixes: 7dbe8c62ceeb ("ARM: dts: Add minimal Raspberry Pi 4 support") Signed-off-by: Phil Elwell <phil@raspberrypi.com> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250222094113.48198-1-wahrenst@gmx.net Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit c24f272ae751a9f54f8816430e7f2d56031892cc ]

During upstream process of Raspberry Pi 4 back in 2019 the ARMv7 stubs
didn't configured the ARM architectural timer. This firmware issue has
been fixed in 2020, which gave users enough time to update their system.

So drop this property to allow the use of the vDSO version of
clock_gettime.

Link: https://github.com/raspberrypi/tools/pull/113
Fixes: 7dbe8c62ceeb ("ARM: dts: Add minimal Raspberry Pi 4 support")
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250222094113.48198-1-wahrenst@gmx.net
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ARM: OMAP1: select CONFIG_GENERIC_IRQ_CHIP 2025-03-28T20:58:59+00:00 Arnd Bergmann arnd@arndb.de 2025-02-05T12:11:33+00:00 8c936723a407f408d49e34c1fd1321eddc0c97ca [ Upstream commit 98f3ab18a0a55aa1ff2cd6b74bd0c02c8f76f17e ] When GENERIC_IRQ_CHIP is disabled, OMAP1 kernels fail to link: arm-linux-gnueabi-ld: arch/arm/mach-omap1/irq.o: in function `omap1_init_irq': irq.c:(.init.text+0x1e8): undefined reference to `irq_alloc_generic_chip' arm-linux-gnueabi-ld: irq.c:(.init.text+0x228): undefined reference to `irq_setup_generic_chip' arm-linux-gnueabi-ld: irq.c:(.init.text+0x2a8): undefined reference to `irq_gc_set_wake' arm-linux-gnueabi-ld: irq.c:(.init.text+0x2b0): undefined reference to `irq_gc_mask_set_bit' arm-linux-gnueabi-ld: irq.c:(.init.text+0x2b4): undefined reference to `irq_gc_mask_clr_bit' This has apparently been the case for many years, but I never caught it in randconfig builds until now, as there are dozens of other drivers that also 'select GENERIC_IRQ_CHIP' and statistically there is almost always one of them enabled. Fixes: 55b447744389 ("ARM: OMAP1: Switch to use generic irqchip in preparation for sparse IRQ") Link: https://lore.kernel.org/r/20250205121151.289535-1-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 98f3ab18a0a55aa1ff2cd6b74bd0c02c8f76f17e ]

When GENERIC_IRQ_CHIP is disabled, OMAP1 kernels fail to link:

arm-linux-gnueabi-ld: arch/arm/mach-omap1/irq.o: in function `omap1_init_irq':
irq.c:(.init.text+0x1e8): undefined reference to `irq_alloc_generic_chip'
arm-linux-gnueabi-ld: irq.c:(.init.text+0x228): undefined reference to `irq_setup_generic_chip'
arm-linux-gnueabi-ld: irq.c:(.init.text+0x2a8): undefined reference to `irq_gc_set_wake'
arm-linux-gnueabi-ld: irq.c:(.init.text+0x2b0): undefined reference to `irq_gc_mask_set_bit'
arm-linux-gnueabi-ld: irq.c:(.init.text+0x2b4): undefined reference to `irq_gc_mask_clr_bit'

This has apparently been the case for many years, but I never caught it
in randconfig builds until now, as there are dozens of other drivers
that also 'select GENERIC_IRQ_CHIP' and statistically there is almost
always one of them enabled.

Fixes: 55b447744389 ("ARM: OMAP1: Switch to use generic irqchip in preparation for sparse IRQ")
Link: https://lore.kernel.org/r/20250205121151.289535-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ARM: dts: bcm2711: PL011 UARTs are actually r1p5 2025-03-28T20:58:59+00:00 Phil Elwell phil@raspberrypi.com 2025-02-23T12:56:13+00:00 06c5caadc58cfd9f2303f36ccc6e84098285274d [ Upstream commit 0de09025f161f67c07978c4742e221243d070d41 ] The ARM PL011 UART instances in BCM2711 are r1p5 spec, which means they have 32-entry FIFOs. The correct periphid value for this is 0x00341011. Thanks to N Buchwitz for pointing this out. Signed-off-by: Phil Elwell <phil@raspberrypi.com> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/20250223125614.3592-2-wahrenst@gmx.net Fixes: 7dbe8c62ceeb ("ARM: dts: Add minimal Raspberry Pi 4 support") Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 0de09025f161f67c07978c4742e221243d070d41 ]

The ARM PL011 UART instances in BCM2711 are r1p5 spec, which means they
have 32-entry FIFOs. The correct periphid value for this is 0x00341011.
Thanks to N Buchwitz for pointing this out.

Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20250223125614.3592-2-wahrenst@gmx.net
Fixes: 7dbe8c62ceeb ("ARM: dts: Add minimal Raspberry Pi 4 support")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ARM: dts: dra7: Add bus_dma_limit for l4 cfg bus 2025-02-21T12:50:11+00:00 Romain Naour romain.naour@skf.com 2024-11-15T10:25:37+00:00 1dc81fbe691288bf358b9cda5a8ebe6ef46a14d1 commit c1472ec1dc4419d0bae663c1a1e6cb98dc7881ad upstream. A bus_dma_limit was added for l3 bus by commit cfb5d65f2595 ("ARM: dts: dra7: Add bus_dma_limit for L3 bus") to fix an issue observed only with SATA on DRA7-EVM with 4GB RAM and CONFIG_ARM_LPAE enabled. Since kernel 5.13, the SATA issue can be reproduced again following the SATA node move from L3 bus to L4_cfg in commit 8af15365a368 ("ARM: dts: Configure interconnect target module for dra7 sata"). Fix it by adding an empty dma-ranges property to l4_cfg and segment@100000 nodes (parent device tree node of SATA controller) to inherit the 2GB dma ranges limit from l3 bus node. Note: A similar fix was applied for PCIe controller by commit 90d4d3f4ea45 ("ARM: dts: dra7: Fix bus_dma_limit for PCIe"). Fixes: 8af15365a368 ("ARM: dts: Configure interconnect target module for dra7 sata"). Link: https://lore.kernel.org/linux-omap/c583e1bb-f56b-4489-8012-ce742e85f233@smile.fr/ Cc: stable@vger.kernel.org # 5.13 Signed-off-by: Romain Naour <romain.naour@skf.com> Link: https://lore.kernel.org/r/20241115102537.1330300-1-romain.naour@smile.fr Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c1472ec1dc4419d0bae663c1a1e6cb98dc7881ad upstream.

A bus_dma_limit was added for l3 bus by commit cfb5d65f2595
("ARM: dts: dra7: Add bus_dma_limit for L3 bus") to fix an issue
observed only with SATA on DRA7-EVM with 4GB RAM and CONFIG_ARM_LPAE
enabled.

Since kernel 5.13, the SATA issue can be reproduced again following
the SATA node move from L3 bus to L4_cfg in commit 8af15365a368
("ARM: dts: Configure interconnect target module for dra7 sata").

Fix it by adding an empty dma-ranges property to l4_cfg and
segment@100000 nodes (parent device tree node of SATA controller) to
inherit the 2GB dma ranges limit from l3 bus node.

Note: A similar fix was applied for PCIe controller by commit
90d4d3f4ea45 ("ARM: dts: dra7: Fix bus_dma_limit for PCIe").

Fixes: 8af15365a368 ("ARM: dts: Configure interconnect target module for dra7 sata").
Link: https://lore.kernel.org/linux-omap/c583e1bb-f56b-4489-8012-ce742e85f233@smile.fr/
Cc: stable@vger.kernel.org # 5.13
Signed-off-by: Romain Naour <romain.naour@skf.com>
Link: https://lore.kernel.org/r/20241115102537.1330300-1-romain.naour@smile.fr
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: dts: mediatek: mt7623: fix IR nodename 2025-02-21T12:49:16+00:00 Rafał Miłecki rafal@milecki.pl 2024-06-17T09:46:33+00:00 df23e33009a94557a5448da8403c9bd10bd1f30c [ Upstream commit 90234cf9b37c57201a24b78c217a91a8af774109 ] Fix following validation error: arch/arm/boot/dts/mediatek/mt7623a-rfb-emmc.dtb: cir@10013000: $nodename:0: 'cir@10013000' does not match '^ir(-receiver)?(@[a-f0-9]+)?$' from schema $id: http://devicetree.org/schemas/media/mediatek,mt7622-cir.yaml# Fixes: 91044f38dae7 ("arm: dts: mt7623: add ir nodes to the mt7623.dtsi file") Cc: linux-media@vger.kernel.org Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Link: https://lore.kernel.org/r/20240617094634.23173-1-zajec5@gmail.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 90234cf9b37c57201a24b78c217a91a8af774109 ]

Fix following validation error:
arch/arm/boot/dts/mediatek/mt7623a-rfb-emmc.dtb: cir@10013000: $nodename:0: 'cir@10013000' does not match '^ir(-receiver)?(@[a-f0-9]+)?$'
        from schema $id: http://devicetree.org/schemas/media/mediatek,mt7622-cir.yaml#

Fixes: 91044f38dae7 ("arm: dts: mt7623: add ir nodes to the mt7623.dtsi file")
Cc: linux-media@vger.kernel.org
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20240617094634.23173-1-zajec5@gmail.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>