linux-stable.git/arch/arm, branch v5.4.145

ARM: 8918/2: only build return_address() if needed

2021-09-12T06:56:40+00:00

commit fb033c95c94ca1ee3d16e04ebdb85d65fb55fff8 upstream.

The system currently warns if the config conditions for
building return_address in arch/arm/kernel/return_address.c
are not met, leaving just an EXPORT_SYMBOL_GPL(return_address)
of a function defined to be 'static linline'.
This is a result of aeea3592a13b ("ARM: 8158/1: LLVMLinux: use static inline in ARM ftrace.h").

Since we're not going to build anything other than an exported
symbol for something that is already being defined to be an
inline-able return of NULL, just avoid building the code to
remove the following warning:

Fixes: aeea3592a13b ("ARM: 8158/1: LLVMLinux: use static inline in ARM ftrace.h")
Signed-off-by: Ben Dooks 
Signed-off-by: Russell King 
Signed-off-by: Greg Kroah-Hartman

ARM: dts: nomadik: Fix up interrupt controller node names

2021-08-26T12:36:14+00:00

[ Upstream commit 47091f473b364c98207c4def197a0ae386fc9af1 ]

Once the new schema interrupt-controller/arm,vic.yaml is added, we get
the below warnings:

	arch/arm/boot/dts/ste-nomadik-nhk15.dt.yaml:
	intc@10140000: $nodename:0: 'intc@10140000' does not match
	'^interrupt-controller(@[0-9a-f,]+)*$'

Fix the node names for the interrupt controller to conform
to the standard node name interrupt-controller@..

Signed-off-by: Sudeep Holla 
Signed-off-by: Linus Walleij 
Cc: Linus Walleij 
Link: https://lore.kernel.org/r/20210617210825.3064367-2-sudeep.holla@arm.com
Link: https://lore.kernel.org/r/20210626000103.830184-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann 
Signed-off-by: Sasha Levin

ARM: dts: am43x-epos-evm: Reduce i2c0 bus speed for tps65218

2021-08-26T12:36:13+00:00

[ Upstream commit 20a6b3fd8e2e2c063b25fbf2ee74d86b898e5087 ]

Based on the latest timing specifications for the TPS65218 from the data
sheet, http://www.ti.com/lit/ds/symlink/tps65218.pdf, document SLDS206
from November 2014, we must change the i2c bus speed to better fit within
the minimum high SCL time required for proper i2c transfer.

When running at 400khz, measurements show that SCL spends
0.8125 uS/1.666 uS high/low which violates the requirement for minimum
high period of SCL provided in datasheet Table 7.6 which is 1 uS.
Switching to 100khz gives us 5 uS/5 uS high/low which both fall above
the minimum given values for 100 khz, 4.0 uS/4.7 uS high/low.

Without this patch occasionally a voltage set operation from the kernel
will appear to have worked but the actual voltage reflected on the PMIC
will not have updated, causing problems especially with cpufreq that may
update to a higher OPP without actually raising the voltage on DCDC2,
leading to a hang.

Signed-off-by: Dave Gerlach 
Signed-off-by: Kevin Hilman 
Signed-off-by: Tony Lindgren 
Signed-off-by: Sasha Levin

omap5-board-common: remove not physically existing vdds_1v8_main fixed-regulator

2021-08-12T11:20:55+00:00

[ Upstream commit c68ef4ad180e09805fa46965d15e1dfadf09ffa5 ]

This device tree include file describes a fixed-regulator
connecting smps7_reg output (1.8V) to some 1.8V rail and
consumers (vdds_1v8_main).

This regulator does not physically exist.

I assume it was introduced as a wrapper around smps7_reg
to provide a speaking signal name "vdds_1v8_main" as label.

This fixed-regulator without real function was not an issue
in driver code until

  Commit 98e48cd9283d ("regulator: core: resolve supply for boot-on/always-on regulators")

introduced a new check for regulator initialization which
makes Palmas regulator registration fail:

[    5.407712] ldo1: supplied by vsys_cobra
[    5.412748] ldo2: supplied by vsys_cobra
[    5.417603] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator

The reason is that the supply-chain of regulators is too
long and goes from ldo3 through the virtual vdds_1v8_main
regulator and then back to smps7. This adds a cross-dependency
of probing Palmas regulators and the fixed-regulator which
leads to probe deferral by the new check and is no longer
resolved.

Since we do not control what device tree files including this
one reference (either &vdds_1v8_main or &smps7_reg or both)
we keep both labels for smps7 for compatibility.

Fixes: 98e48cd9283d ("regulator: core: resolve supply for boot-on/always-on regulators")
Signed-off-by: H. Nikolaus Schaller 
Signed-off-by: Tony Lindgren 
Signed-off-by: Sasha Levin

ARM: dts: am437x-l4: fix typo in can@0 node

2021-08-12T11:20:55+00:00

[ Upstream commit 0162a9964365fd26e34575e121b17d021204c481 ]

Replace clock-name with clock-names.

Fixes: 2a4117df9b43 ("ARM: dts: Fix dcan driver probe failed on am437x platform")
Signed-off-by: Dario Binacchi 
Signed-off-by: Tony Lindgren 
Signed-off-by: Sasha Levin

ARM: dts: imx: Swap M53Menlo pinctrl_power_button/pinctrl_power_out pins

2021-08-12T11:20:55+00:00

[ Upstream commit 3d9e30a52047f2d464efdfd1d561ae1f707a0286 ]

The pinctrl_power_button/pinctrl_power_out each define single GPIO
pinmux, except it is exactly the other one than the matching gpio-keys
and gpio-poweroff DT nodes use for that functionality. Swap the two
GPIOs to correct this error.

Fixes: 50d29fdb765d ("ARM: dts: imx53: Add power GPIOs on M53Menlo")
Signed-off-by: Marek Vasut 
Cc: Shawn Guo 
Cc: Fabio Estevam 
Cc: NXP Linux Team 
Reviewed-by: Fabio Estevam 
Signed-off-by: Shawn Guo 
Signed-off-by: Sasha Levin

ARM: imx: fix missing 3rd argument in macro imx_mmdc_perf_init

2021-08-12T11:20:54+00:00

[ Upstream commit 20fb73911fec01f06592de1cdbca00b66602ebd7 ]

The function imx_mmdc_perf_init recently had a 3rd argument added to
it but the equivalent macro was not updated and is still the older
2 argument version. Fix this by adding in the missing 3rd argumement
mmdc_ipg_clk.

Fixes: f07ec8536580 ("ARM: imx: add missing clk_disable_unprepare()")
Signed-off-by: Colin Ian King 
Signed-off-by: Shawn Guo 
Signed-off-by: Sasha Levin

ARM: dts: colibri-imx6ull: limit SDIO clock to 25MHz

2021-08-12T11:20:54+00:00

[ Upstream commit 828db68f4ff1ab6982a36a56522b585160dc8c8e ]

NXP and AzureWave don't recommend using SDIO bus mode 3.3V@50MHz due
to noise affecting the wireless throughput. Colibri iMX6ULL uses only
3.3V signaling for Wi-Fi module AW-CM276NF.

Limit the SDIO Clock on Colibri iMX6ULL to 25MHz.

Fixes: c2e4987e0e02 ("ARM: dts: imx6ull: add Toradex Colibri iMX6ULL support")
Signed-off-by: Oleksandr Suvorov 
Reviewed-by: Fabio Estevam 
Signed-off-by: Shawn Guo 
Signed-off-by: Sasha Levin

ARM: dts: imx6qdl-sr-som: Increase the PHY reset duration to 10ms

2021-08-12T11:20:54+00:00

[ Upstream commit fd8e83884fdd7b5fc411f201a58d8d01890198a2 ]

The AR803x PHY used on this modules seems to require the reset line to
be asserted for around 10ms in order to avoid rare cases where the PHY
gets stuck in an incoherent state that prevents it to function
correctly.

The previous value of 2ms was found to be problematic on some setups,
causing intermittent issues where the PHY would be unresponsive
every once in a while on some sytems, with a low occurrence (it typically
took around 30 consecutive reboots to encounter the issue).

Bumping the delay to the 10ms makes the issue dissapear, with more than
2500 consecutive reboots performed without the issue showing-up.

Fixes: 208d7baf8085 ("ARM: imx: initial SolidRun HummingBoard support")
Signed-off-by: Maxime Chevallier 
Tested-by: Hervé Codina 
Reviewed-by: Russell King (Oracle) 
Signed-off-by: Shawn Guo 
Signed-off-by: Sasha Levin

ARM: imx: add missing clk_disable_unprepare()

2021-08-12T11:20:54+00:00

[ Upstream commit f07ec85365807b3939f32d0094a6dd5ce065d1b9 ]

clock source is prepared and enabled by clk_prepare_enable()
in probe function, but no disable or unprepare in remove and
error path.

Fixes: 9454a0caff6a ("ARM: imx: add mmdc ipg clock operation for mmdc")
Reported-by: Hulk Robot 
Signed-off-by: Yang Yingliang 
Reviewed-by: Dong Aisheng 
Signed-off-by: Shawn Guo 
Signed-off-by: Sasha Levin