linux-stable.git/arch/arm, branch v4.9.85

ARM: dts: Fix elm interrupt compiler warning

2018-02-25T10:05:47+00:00

[ Upstream commit d364b038bc962f494cffb8f6cb6cddbe41bcb5b6 ]

Looks like the interrupt property is missing the controller and level
information causing:

Warning (interrupts_property): interrupts size is (4), expected multiple
of 12 in /ocp/elm@48078000

Signed-off-by: Tony Lindgren 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ARM: dts: am437x-cm-t43: Correct the dmas property of spi0

2018-02-25T10:05:46+00:00

[ Upstream commit ca41e244517d6d3f1600c229ff7ca615049c1e9c ]

The DMA binding for eDMA needs 2 parameters, not 1.
The second, missing parameter is the tptc to be used for the channel.

Signed-off-by: Peter Ujfalusi 
Signed-off-by: Tony Lindgren 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ARM: dts: am4372: Correct the interrupts_properties of McASP

2018-02-25T10:05:46+00:00

[ Upstream commit 627395a6f8091c0aa18f49dca7df59ba3ec147ef ]

Fixes the following warnings:

arch/arm/boot/dts/am437x-cm-t43.dtb: Warning (interrupts_property):
interrupts size is (8), expected multiple of 12 in
/ocp@44000000/mcasp@48038000

arch/arm/boot/dts/am437x-cm-t43.dtb: Warning (interrupts_property):
interrupts size is (8), expected multiple of 12 in
/ocp@44000000/mcasp@4803C000

Signed-off-by: Peter Ujfalusi 
Signed-off-by: Tony Lindgren 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ARM: dts: logicpd-somlv: Fix wl127x pinmux

2018-02-25T10:05:45+00:00

[ Upstream commit cd7594ac3281722cb8f10d6f6c7e4287747c7a9d ]

The pin assignment for the wl127x interrupt was incorrect.  I am
not sure how this every worked.  This also eliminates a conflict with
the SMC911x ethernet driver and properly moves pinmuxes for the
related gpio to omap3_pmx_wkup from omap3_pmx_core.

Fixes: ab8dd3aed011 ("ARM: DTS: Add minimal Support for Logic PD
DM3730 SOM-LV")

Signed-off-by: Adam Ford 
Signed-off-by: Tony Lindgren 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ARM: dts: logicpd-som-lv: Fix gpmc addresses for NAND and enet

2018-02-25T10:05:45+00:00

[ Upstream commit 3c18bbf3d11d2005da08b57ff26f44ff1c2b12d0 ]

This patch fixes and issue where the NAND and GPMC based ethernet
controller stopped working.  This also updates the GPMC settings
to be consistent with the Logic PD Torpedo development from the
commit listed above.

Fixes: 44e4716499b8 ("ARM: dts: omap3: Fix NAND device nodes")

Signed-off-by: Adam Ford 
Signed-off-by: Tony Lindgren 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ARM: dts: Fix omap4 hang with GPS connected to USB by using wakeupgen

2018-02-25T10:05:45+00:00

[ Upstream commit cf87634c8b24e24bf379b8c6807c8b0fb5f23567 ]

There's been a reproducable USB OHCI/EHCI cpuidle related hang on omap4
for a while that happens after about 20 - 40 minutes on an idle system
with some data feeding device being connected, like a USB GPS device or
a cellular modem.

This issue happens in cpuidle states C2 and C3 and does not happen if
cpuidle is limited to C1 state only. The symptoms are that the whole
system hangs and never wakes up from idle, and if a watchdog is
configured the system reboots after a while.

Turns out that OHCI/EHCI devices on omap4 are trying to use the GIC
interrupt controller directly as a parent instead of the WUGEN. We
need to pass the interrupts through WUGEN to GIC to provide the wakeup
events for the processor.

Let's fix the issue by removing the gic interrupt-parent and use the
default interrupt-parent wakeupgen instead. Note that omap5.dtsi had
this already fixes earlier by commit 7136d457f365 ("ARM: omap: convert
wakeupgen to stacked domains") but we somehow missed omap4 at that
point.

Fixes: 7136d457f365 ("ARM: omap: convert wakeupgen to stacked domains")
Cc: Dave Gerlach 
Cc: Nishanth Menon 
Cc: Marc Zyngier 
Cc: Sebastian Reichel 
Reviewed-by: Roger Quadros 
Signed-off-by: Tony Lindgren 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ARM: AM33xx: PRM: Remove am33xx_pwrdm_read_prev_pwrst function

2018-02-25T10:05:45+00:00

[ Upstream commit b6d6af7226465b6d11eac09d0be2ab78a4a9eb62 ]

Referring TRM Am335X series:
http://www.ti.com/lit/ug/spruh73p/spruh73p.pdf

The LastPowerStateEntered bitfield is present only for PM_CEFUSE
domain. This is not present in any of the other power domains. Hence
remove the generic am33xx_pwrdm_read_prev_pwrst hook which wrongly
reads the reserved bit fields for all the other power domains.

Reading the reserved bits leads to wrongly interpreting the low
power transitions for various power domains that do not have the
LastPowerStateEntered field. The pm debug counters values are wrong
currently as we are incrementing them based on the reserved bits.

Signed-off-by: Keerthy 
Signed-off-by: Tony Lindgren 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ARM: OMAP2+: Fix SRAM virt to phys translation for save_secure_ram_context

2018-02-25T10:05:45+00:00

[ Upstream commit d09220a887f70368afa79e850c95e74890c0a32d ]

With the CMA changes from Joonsoo Kim , it
was noticed that n900 stopped booting. After investigating it turned
out that n900 save_secure_ram_context does some whacky virtual to
physical address translation for the SRAM data address.

As we now only have minimal parts of omap3 idle code copied to SRAM,
running save_secure_ram_context() in SRAM is not needed. It only gets
called on PM init. And it seems there's no need to ever call this from
SRAM idle code.

So let's just keep save_secure_ram_context() in DDR, and pass it the
physical address of the parameters. We can do everything else in
omap-secure.c like we already do for other secure code.

And since we don't have any documentation, I still have no clue what
the values for 0, 1 and 1 for the parameters might be. If somebody has
figured it out, please do send a patch to add some comments.

Debugged-by: Joonsoo Kim 
Signed-off-by: Tony Lindgren 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ARM: 8743/1: bL_switcher: add MODULE_LICENSE tag

2018-02-25T10:05:44+00:00

commit a21b4c10c7bf5b58112afa20d6fa829e8d74e3e6 upstream.

Without this tag, we get a build warning:

WARNING: modpost: missing MODULE_LICENSE() in arch/arm/common/bL_switcher_dummy_if.o

For completeness, I'm also adding author and description fields.

Signed-off-by: Arnd Bergmann 
Signed-off-by: Russell King 
Signed-off-by: Greg Kroah-Hartman

ARM: dts: Delete bogus reference to the charlcd

2018-02-22T14:43:56+00:00

commit 586b2a4befad88cd87b372a1cea01e58c6811ea9 upstream.

The EB MP board probably has a character LCD but the board manual does
not really state which IRQ it has assigned to this device. The invalid
assignment was a mistake by me during submission of the DTSI where I was
looking for the reference, didn't find it and didn't fill it in.

Delete this for now: it can probably be fixed but that requires access
to the actual board for some trial-and-error experiments.

Reported-by: Arnd Bergmann 
Signed-off-by: Linus Walleij 
Signed-off-by: Olof Johansson 
Signed-off-by: Greg Kroah-Hartman